STK&MATLAB connect（三）设施

创建一个设施（在当前场景的中心体上）

root.ExecuteCommand('New / */Facility MyFacility');

设置设施的大地测量位置（纬度、经度、海拔）

%纬度、经度、高度
root.ExecuteCommand('SetPosition */Facility/MyFacility Geodetic 41.9849 21.4039 0');

其中Geodetic其他可选参数，如下：（其中MSL为Mean Sea Level，平均海平面）

  
Geodetic的<Parameters>中还有一种Terrain的情况，即将高度设置为地形的高度

root.ExecuteCommand('SetPosition */Facility/MyFacility Geodetic 41.9849 21.4039 UseTerrain');

将高度设置为离地面的距离

%默认单位是米
root.ExecuteCommand('SetHeightAboveGround */Facility/MyFacility 0.05'); 

设置方位角俯仰角遮蔽

root.ExecuteCommand('SetAzElMask */Facility/MyFacility Terrain');

给大家一个例子，抛砖引玉

uiap = actxserver('STK11.application');
root = uiap.Personality2;
root.NewScenario('MyScenario');
scen = root.CurrentScenario;
root.ExecuteCommand('New / */Facility MyFacility');
root.ExecuteCommand('SetPosition */Facility/MyFacility Geodetic 41.9849 21.4039 0');
root.ExecuteCommand('SetAzElMask */Facility/MyFacility Terrain');

可获得权柄，此时Facility.get就可以看到信息 

FacilityPath = '*/Facility/MyFacility';
Facility=root.GetObjectFromPath(FacilityPath)