【MATLAB报错】错误使用 sym＞tomupad Unable to convert ‘uss‘ to ‘sym‘.解决方法

出错代码如下：

syms s;
% Gnom matrix
g11 = 13.8 / (0.16 * s + 1);
g12 = -0.05 / (0.1 * s + 1);
g21 = 0.1 / (0.3 * s + 1);
g22 = 4.25 * s / (0.84 * s - 1);
Gnom = [g11 g12; g21 g22];

w1 = makeweight(0.2, 35, 9);
w2 = makeweight(0.25, 40, 8);
W = blkdiag(w1, w2);
Delta_1 = ultidyn('Delta_1', [1 1]);
Delta_2 = ultidyn('Delta_2', [1 1]);
Delta = blkdiag(Delta_1, Delta_2);
G = Gnom * (eye(2) + Delta * W);  // 出错：unable to convert 'uss' to 'sym'

报错截图：

解决方法及解释：将符号变量s的定义从“syms s”改成“s = tf(‘s’)”，tf = transfer function，系统的转换函数。

修正后的代码：

s = tf('s');
% syms s;
% Gnom matrix
g11 = 13.8 / (0.16 * s + 1);
g12 = -0.05 / (0.1 * s + 1);
g21 = 0.1 / (0.3 * s + 1);
g22 = 4.25 * s / (0.84 * s - 1);
Gnom = [g11 g12; g21 g22];

w1 = makeweight(0.2, 35, 9);
w2 = makeweight(0.25, 40, 8);
W = blkdiag(w1, w2);
Delta_1 = ultidyn('Delta_1', [1 1]);
Delta_2 = ultidyn('Delta_2', [1 1]);
Delta = blkdiag(Delta_1, Delta_2);
G = Gnom * (eye(2) + Delta * W);

注意： 将s的定义修改为s = tf(‘s’)虽然可以解决上述变量类型的报错，但这样一来，就无法通过det命令计算矩阵Gnom的行列式，会出现如下报错：

提示输入的参数类型不正确。还需将s = tf(‘s’)改回syms s。计算出的矩阵行列式值（用s表示）：