linux之数据库进阶
01:MySQL主从同步 、 主从同步模式02: 数据读写分离 、 MySQL多实例
03: 数据分片概述 、 部署MyCAT服务 、 测试配置
04: MHA集群概述 、 部署MHA集群
05: PXC 、 MySQL存储引擎
文章目录
PXC 、 MySQL存储引擎
安装软件
问题
环境准备 安装软件包
方案
准备3台虚拟主机,配置ip地址和主机名。具体如图-1所示:(不需要安装任何MySQL服务软件)
图-1
步骤
实现此案例需要按照如下步骤进行。
一:环境准备
配置主机名与ip地址绑定
配置服务器192.168.4.71
]# vim /etc/hosts
192.168.4.71 pxcnode71
192.168.4.72 pxcnode72
192.168.4.73 pxcnode73
:wq
]#hostname pxcnode71
配置服务器192.168.4.72
]# vim /etc/hosts
192.168.4.71 pxcnode71
192.168.4.72 pxcnode72
192.168.4.73 pxcnode73
:wq
]#hostname pxcnode72
配置服务器192.168.4.73
]# vim /etc/hosts
192.168.4.71 pxcnode71
192.168.4.72 pxcnode72
192.168.4.73 pxcnode73
:wq
]#hostname pxcnode73
在任意一台服务器上ping 对方的主机名,ping通为配置成功。
[root@host71 ~]# ping -c 2 pxcnode71 //成功
PING pxcnode71 (192.168.4.71) 56(84) bytes of data.
64 bytes from pxcnode71 (192.168.4.71): icmp_seq=1 ttl=255 time=0.011 ms
64 bytes from pxcnode71 (192.168.4.71): icmp_seq=2 ttl=255 time=0.020 ms
--- pxcnode71 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 999ms
rtt min/avg/max/mdev = 0.011/0.015/0.020/0.006 ms
[root@host71 ~]#
[root@host71 ~]#
[root@host71 ~]# ping -c 2 pxcnode72 //成功
PING pxcnode72 (192.168.4.72) 56(84) bytes of data.
64 bytes from pxcnode72 (192.168.4.72): icmp_seq=1 ttl=255 time=0.113 ms
64 bytes from pxcnode72 (192.168.4.72): icmp_seq=2 ttl=255 time=0.170 ms
--- pxcnode72 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1000ms
rtt min/avg/max/mdev = 0.113/0.141/0.170/0.030 ms
[root@host71 ~]#
[root@host71 ~]#
[root@host71 ~]# ping -c 2 pxcnode73 //成功
PING pxcnode73 (192.168.4.73) 56(84) bytes of data.
64 bytes from pxcnode73 (192.168.4.73): icmp_seq=1 ttl=255 time=0.198 ms
64 bytes from pxcnode73 (192.168.4.73): icmp_seq=2 ttl=255 time=0.155 ms
--- pxcnode73 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1000ms
rtt min/avg/max/mdev = 0.155/0.176/0.198/0.025 ms
[root@host71 ~]#
二:安装软件包
1)在192.168.4.71 服务器安装软件包
软件包之间有依赖注意软件包安装顺序
]# rpm -ivh libev-4.15-1.el6.rf.x86_64.rpm //安装依赖
]# yum -y install percona-xtrabackup-24-2.4.13-1.el7.x86_64.rpm
]# rpm -ivh qpress-1.1-14.11.x86_64.rpm //安装依赖
]# tar -xvf Percona-XtraDB-Cluster-5.7.25-31.35-r463-el7-x86_64-bundle.tar
]# yum -y install Percona-XtraDB-Cluster-*.rpm
2)在192.168.4.72 服务器安装软件包
]# rpm -ivh libev-4.15-1.el6.rf.x86_64.rpm //安装依赖
]# yum -y install percona-xtrabackup-24-2.4.13-1.el7.x86_64.rpm
]# rpm -ivh qpress-1.1-14.11.x86_64.rpm //安装依赖
]# tar -xvf Percona-XtraDB-Cluster-5.7.25-31.35-r463-el7-x86_64-bundle.tar
]# yum -y install Percona-XtraDB-Cluster-*.rpm
3)在192.168.4.73 服务器安装软件包
]# rpm -ivh libev-4.15-1.el6.rf.x86_64.rpm //安装依赖
]# yum -y install percona-xtrabackup-24-2.4.13-1.el7.x86_64.rpm
]# rpm -ivh qpress-1.1-14.11.x86_64.rpm //安装依赖
]# tar -xvf Percona-XtraDB-Cluster-5.7.25-31.35-r463-el7-x86_64-bundle.tar
]# yum -y install Percona-XtraDB-Cluster-*.rpm
配置服务
问题
修改mysqld.cnf文件 修改mysqld_safe.cnf文件 修改wsrap.cnf文件 启动服务
步骤
实现此案例需要按照如下步骤进行。
一:修改mysqld.cnf文件
[root@pxcnode71 ~]# vim /etc/percona-xtradb-cluster.conf.d/mysqld.cnf
[mysqld]
server-id=71 //server-id 不允许重复
datadir=/var/lib/mysql //数据库目录
socket=/var/lib/mysql/mysql.sock //socket文件
log-error=/var/log/mysqld.log //日志文件
pid-file=/var/run/mysqld/mysqld.pid //pid文件
log-bin //启用binlog日志
log_slave_updates //启用链式复制
expire_logs_days=7 //日志文件保留天数
:wq
修改服务器192.168.4.72
[root@pxcnode72 ~]# vim /etc/percona-xtradb-cluster.conf.d/mysqld.cnf
[mysqld]
server-id=72 //server-id 不允许重复
datadir=/var/lib/mysql //数据库目录
socket=/var/lib/mysql/mysql.sock //socket文件
log-error=/var/log/mysqld.log //日志文件
pid-file=/var/run/mysqld/mysqld.pid //pid文件
log-bin //启用binlog日志
log_slave_updates //启用链式复制
expire_logs_days=7 //日志文件保留天数
:wq
修改服务器192.168.4.73
[root@pxcnode73 ~]# vim /etc/percona-xtradb-cluster.conf.d/mysqld.cnf
[mysqld]
server-id=73 //server-id 不允许重复
datadir=/var/lib/mysql //数据库目录
socket=/var/lib/mysql/mysql.sock //socket文件
log-error=/var/log/mysqld.log //日志文件
pid-file=/var/run/mysqld/mysqld.pid //pid文件
log-bin //启用binlog日志
log_slave_updates //启用链式复制
expire_logs_days=7 //日志文件保留天数
:wq
二:修改mysqld_safe.cnf文件
1)分别修改3台服务器的mysqld_safe.cnf (使用默认配置即可)
[root@pxcnode71 ~]# vim /etc/percona-xtradb-cluster.conf.d/mysqld_safe.cnf
[mysqld_safe]
pid-file = /var/run/mysqld/mysqld.pid
socket = /var/lib/mysql/mysql.sock
nice = 0
:wq
修改服务器192.168.4.72
[root@pxcnode72 ~]# vim /etc/percona-xtradb-cluster.conf.d/mysqld_safe.cnf
[mysqld_safe]
pid-file = /var/run/mysqld/mysqld.pid
socket = /var/lib/mysql/mysql.sock
nice = 0
:wq
修改服务器192.168.4.73
[root@pxcnode73 ~]# vim /etc/percona-xtradb-cluster.conf.d/mysqld_safe.cnf
[mysqld_safe]
pid-file = /var/run/mysqld/mysqld.pid
socket = /var/lib/mysql/mysql.sock
nice = 0
:wq
三:修改wsrep.cnf文件
1)分别修改3台服务器的wsrep.cnf
[root@pxcnode71 ~]# vim /etc/percona-xtradb-cluster.conf.d/wsrep.cnf
wsrep_cluster_address=gcomm://192.168.4.71,192.168.4.72,192.168.4.73//成员列表
wsrep_node_address=192.168.4.71 //本机ip
wsrep_cluster_name=pxc-cluster //集群名
wsrep_node_name=pxcnode71 //本机主机名
wsrep_sst_auth="sstuser:123qqq...A" //SST数据同步授权用户及密码
:wq
修改服务器192.168.4.72
[root@pxcnode72 ~]# vim /etc/percona-xtradb-cluster.conf.d/wsrep.cnf
wsrep_cluster_address=gcomm://192.168.4.71,192.168.4.72,192.168.4.73//成员列表
wsrep_node_address=192.168.4.72 //本机ip
wsrep_cluster_name=pxc-cluster //集群名
wsrep_node_name=pxcnode72 //本机主机名
wsrep_sst_auth="sstuser:123qqq...A" //SST数据同步授权用户及密码
:wq
修改服务器192.168.4.73
[root@pxcnode73 ~]# vim /etc/percona-xtradb-cluster.conf.d/wsrep.cnf
wsrep_cluster_address=gcomm://192.168.4.71,192.168.4.72,192.168.4.73//成员列表
wsrep_node_address=192.168.4.73 //本机ip
wsrep_cluster_name=pxc-cluster //集群名
wsrep_node_name=pxcnode73 //本机主机名
wsrep_sst_auth="sstuser:123qqq...A" //SST数据同步授权用户及密码
:wq
四:启动服务
1)启动集群服务
注意:在1台服务器上执即可(192.168.4.71),首次启动服务时间比较长
[root@pxcnode71 ~]# ]# systemctl start mysql@bootstrap.service //启动集群服务
[root@pxcnode71 ~]# grep pass /var/log/mysqld.log //查看数据库管理员初始登录密码
2019-06-20T12:29:42.489377Z 1 [Note] A temporary password is generated for root@localhost: W.HiOb8(ok)_
[root@pxcnode71 ~]#mysql –uroot –p’ W.HiOb8(ok)_’ //使用初始密码登录
Mysql> alter user root@”localhost” identified by “123456”;//修改登录密码
MySQL> exit;
[root@pxcnode71 ~]#mysql –uroot –p123456 //使用修改后的密码登录
Mysql> garnt reload, lock tables,replication client,process on *.* to
sstuser@"localhost” identified by “123qqq…A”; //添加授权用户
2)启动数据库服务
启动主机pxcnode72的数据库服务,会自动同步pxcnode71主机的root初始密码和授权用户sstuser
[root@pxcnode72 ~]# systemctl start mysql //启动数据库服务
[root@pxcnode72 ~]#
[root@pxcnode72 ~]# netstat -utnlp | grep :3306
tcp6 0 0 :::3306 :::* LISTEN 12794/mysqld
[root@pxcnode72 ~]# netstat -utnlp | grep :4567
tcp 0 0 0.0.0.0:4567 0.0.0.0:* LISTEN 12794/mysqld
[root@host72 ~]#
启动主机pxcnode73的数据库服务,会自动同步pxcnode71主机的root初始密码和授权用户sstuser
[root@pxcnode73 ~]# systemctl start mysql //启动数据库服务
[root@pxcnode73 ~]#
[root@pxcnode73 ~]# netstat -utnlp | grep :3306
tcp6 0 0 :::3306 :::* LISTEN 12794/mysqld
[root@pxcnode73 ~]# netstat -utnlp | grep :4567
tcp 0 0 0.0.0.0:4567 0.0.0.0:* LISTEN 12794/mysqld
[root@host73 ~]#
测试配置
问题
查看集群信息 访问集群,存取数据 测试故障自动恢复
步骤
实现此案例需要按照如下步骤进行。
一:查看集群信息
1)启动数据库服务
在任意一台数据查看都可以。
[root@pxcnode71 ~]# mysql -uroot -p123456
wsrep_incoming_addresses 192.168.4.71:3306,192.168.4.72:3306,192.168.4.73:3306 //集群成员列表
wsrep_cluster_size 3 //集群服务器台数
wsrep_cluster_status Primary //主机状态
wsrep_connected ON //连接状态
wsrep_ready ON //服务状态
二:访问集群,存取数据
1)添加访问数据的连接用户 (在任意一台服务器上添加都可以,另外的2台服务器会自动同步授权用户)
[root@pxcnode72 ~]# mysql -uroot -p123456
mysql> grant all on gamedb.* to yaya@"%" identified by "123456"; //添加授权用户
Query OK, 0 rows affected, 1 warning (0.18 sec)
[root@pxcnode71 ~]# mysql -uroot -p123456 -e 'show grants for yaya@"%" ' //查看
mysql: [Warning] Using a password on the command line interface can be insecure.
+--------------------------------------------------+
| Grants for yaya@% |
+--------------------------------------------------+
| GRANT USAGE ON *.* TO 'yaya'@'%' |
| GRANT ALL PRIVILEGES ON `gamedb`.* TO 'yaya'@'%' |
+--------------------------------------------------+
[root@pxcnode71 ~]#
[root@pxcnode73 ~]# mysql -uroot -p123456 -e 'show grants for yaya@"%" ' //查看
mysql: [Warning] Using a password on the command line interface can be insecure.
+--------------------------------------------------+
| Grants for yaya@% |
+--------------------------------------------------+
| GRANT USAGE ON *.* TO 'yaya'@'%' |
| GRANT ALL PRIVILEGES ON `gamedb`.* TO 'yaya'@'%' |
+--------------------------------------------------+
[root@pxcnode73 ~]#
2)客户端连接集群存取数据 (连接任意一台数据库服务器的ip地址都可以)
连接数据服务器主机73
client50 ~]# mysql -h192.168.4.73 -uyaya -p123456 //连接服务器73
mysql>
mysql> create database gamedb; //建库
Query OK, 1 row affected (0.19 sec)
mysql> create table gamedb.a(id int primary key auto_increment,name char(10));//建表
Query OK, 0 rows affected (1.02 sec)
mysql> insert into gamedb.a(name)values("bob"),("tom"); //插入记录
Query OK, 2 rows affected (0.20 sec)
Records: 2 Duplicates: 0 Warnings: 0
3)在另外2台数据库服务器查看数据,客户端连接数据库服务器71主机查看数据。
client50 ~]# mysql -h192.168.4.71 -uyaya -p123456 //连接服务器71
mysql> select * from gamedb.a; //查看记录
+----+-------+
| id | name |
+----+-------+
| 2 | bob |
| 5 | tom |
4)客户端连接数据库服务器73主机查看数据
client50 ~]# mysql -h192.168.4.73 -uyaya -p123456 //连接服务器73
mysql> select * from gamedb.a; //查看记录
+----+-------+
| id | name |
+----+-------+
| 2 | bob |
| 5 | tom |
三:测试故障自动恢复
1)停止数据库服务
停止3台服务器的任意一台主机的数据库服务都不会影响数据的存取。
[root@pxcnode71 ~]# systemctl stop mysql //停止71主机的数据库服务
Client50 ~]# client50 ~]# mysql -h192.168.4.72 -uyaya -p123456 //连接服务器72
mysql> insert into gamedb.a(name)values("bob2"),("tom2");
mysql> insert into gamedb.a(name)values("jerry"),("jack");
Query OK, 2 rows affected (0.20 sec)
Records: 2 Duplicates: 0 Warnings: 0
客户端50,连接数据库主机73,查看数据
client50 ~]# mysql -h192.168.4.73 -uyaya -p123456 //连接服务器73
mysql> select * from gamedb.a;
+----+-------+
| id | name |
+----+-------+
| 2 | bob |
| 5 | tom |
| 7 | bob2 |
| 9 | tom2 |
| 11 | jerry |
| 13 | jack |
+----+-------+
6 rows in set (0.00 sec)
3)启动71主机的数据库服务
数据库服务运行后,会自动同步宕机期间的数据。
client50 ~]# mysql -h192.168.4.71 -uyaya -p123456 //连接服务器71
mysql> select * from gamedb.a;
+----+-------+
| id | name |
+----+-------+
| 2 | bob |
| 5 | tom |
| 7 | bob2 |
| 9 | tom2 |
| 11 | jerry |
| 13 | jack |
+----+-------+
rows in set (0.00 sec)
MySQL存储引擎的配置
问题
本案例要求MySQL数据存储引擎的使用,完成以下任务操作:
查看服务支持的存储引擎 修改服务默认使用的存储引擎 查看表使用的存储引擎 设置表使用的存储引擎 修改表存储引擎
步骤
实现此案例需要按照如下步骤进行。
一:查看服务支持的存储引擎
登入MySQL服务器,查看当前支持哪些存储引擎。
使用mysql命令连接,以root用户登入:
[root@dbsvr1 ~]# mysql -u root –p
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 9
Server version: 5.7.17 MySQL Community Server (GPL)
Copyright (c) 2000, 2016, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql>
执行SHOW ENGINES\G指令可列表查看,MySQL 5.6可用的存储引擎有9种(除最后的FEDERATED以外,其他8种都支持),其中默认采用的存储引擎为InnoDB:
mysql> SHOW ENGINES\G
*************************** 1. row ***************************
Engine: InnoDB
Support: DEFAULT //此存储引擎为默认
Comment: Supports transactions, row-level locking, and foreign keys
Transactions: YES
XA: YES
Savepoints: YES
*************************** 2. row ***************************
Engine: MRG_MYISAM
Support: YES
Comment: Collection of identical MyISAM tables
Transactions: NO
XA: NO
Savepoints: NO
*************************** 3. row ***************************
Engine: MEMORY
Support: YES
Comment: Hash based, stored in memory, useful for temporary tables
Transactions: NO
XA: NO
Savepoints: NO
*************************** 4. row ***************************
Engine: BLACKHOLE
Support: YES
Comment: /dev/null storage engine (anything you write to it disappears)
Transactions: NO
XA: NO
Savepoints: NO
*************************** 5. row ***************************
Engine: MyISAM
Support: YES
Comment: MyISAM storage engine
Transactions: NO
XA: NO
Savepoints: NO
*************************** 6. row ***************************
Engine: CSV
Support: YES
Comment: CSV storage engine
Transactions: NO
XA: NO
Savepoints: NO
*************************** 7. row ***************************
Engine: ARCHIVE
Support: YES
Comment: Archive storage engine
Transactions: NO
XA: NO
Savepoints: NO
*************************** 8. row ***************************
Engine: PERFORMANCE_SCHEMA
Support: YES
Comment: Performance Schema
Transactions: NO
XA: NO
Savepoints: NO
*************************** 9. row ***************************
Engine: FEDERATED
Support: NO //此引擎不被支持
Comment: Federated MySQL storage engine
Transactions: NULL
XA: NULL
Savepoints: NULL
9 rows in set (0.01 sec)
二:修改服务默认使用的存储引擎
在 mysql> 环境中,可以直接通过SET指令更改默认的存储引擎(只在本次连接会话过程中有效,退出重进即失效) 。比如临时修改为MyISAM,可执行下列操作:
mysql> SET default_storage_engine=MyISAM; //改用MyISAM引擎
Query OK, 0 rows affected (0.00 sec)
mysql> SHOW VARIABLES LIKE 'default_storage_engine'; //确认结果
+------------------------+--------+
| Variable_name | Value |
+------------------------+--------+
| default_storage_engine | MyISAM |
+------------------------+--------+
1 row in set (0.00 sec)
若希望直接修改MySQL服务程序所采用的默认存储引擎,应将相关设置写入配置文件/etc/my.cnf,并重启服务后生效。比如:
[root@dbsvr1 ~]# vim /etc/my.cnf
[mysqld]
.. ..
default_storage_engine=myisam //改用myisam引擎
[root@dbsvr1 ~]# systemctl restart mysqld.service //重启服务
重新登入 mysql> 确认修改结果:
[root@dbsvr1 ~]# mysql -u root -p
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 3
Server version: 5.7.17 MySQL Community Server (GPL)
Copyright (c) 2000, 2016, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> SHOW VARIABLES LIKE 'default_storage_engine';
+------------------------+--------+
| Variable_name | Value |
+------------------------+--------+
| default_storage_engine | MYISAM | //默认引擎已修改
+------------------------+--------+
1 row in set (0.00 sec)
mysql> exit
Bye
三:查看表使用的存储引擎
登入MySQL服务器查看。
mysql> show create table user \G; //查看建表命令
*************************** 1. row ***************************
Table: user
Create Table: CREATE TABLE `user` (
`id` int(11) NOT NULL AUTO_INCREMENT,
`name` char(50) DEFAULT NULL,
`age` tinyint(3) unsigned DEFAULT '19',
`password` char(1) DEFAULT NULL,
`uid` int(11) DEFAULT NULL,
`gid` int(11) DEFAULT NULL,
`comment` char(150) DEFAULT NULL,
`homedir` char(50) DEFAULT NULL,
`shell` char(50) DEFAULT NULL,
PRIMARY KEY (`id`)
) ENGINE=InnoDB AUTO_INCREMENT=46 DEFAULT CHARSET=latin1 //存储引擎是InnoDB
1 row in set (0.00 sec)
ERROR:
No query specified
mysql>
四:设置表使用的存储引擎
登入MySQL服务器设置。
mysql> create table stuinfo( name char(10), age int )engine=memory;//设置
Query OK, 0 rows affected (0.12 sec)
mysql>
mysql> show create table stuinfo\G; //查看
*************************** 1. row ***************************
Table: stuinfo
Create Table: CREATE TABLE `stuinfo` (
`name` char(10) DEFAULT NULL,
`age` int(11) DEFAULT NULL
) ENGINE=MEMORY DEFAULT CHARSET=latin1 //存储引擎名
1 row in set (0.00 sec)
ERROR:
No query specified
mysql>
五:修改表存储引擎
登入MySQL服务器修改。
mysql> alter table stuinfo engine=innodb; //修改
Query OK, 0 rows affected (0.54 sec)
Records: 0 Duplicates: 0 Warnings: 0
mysql>
mysql> show create table stuinfo\G; //查看
*************************** 1. row ***************************
Table: stuinfo
Create Table: CREATE TABLE `stuinfo` (
`name` char(10) DEFAULT NULL,
`age` int(11) DEFAULT NULL
) ENGINE=InnoDB DEFAULT CHARSET=latin1 //当前存储引擎名
1 row in set (0.00 sec)
ERROR:
No query specified
mysql>
事务特性
问题
具体操作如下:
创建innodb存储引擎的表
关闭服务的自动提交功能
测试事务特性
这里是引用
步骤
实现此案例需要按照如下步骤进行。
一:创建innodb存储引擎的表
1)数据库管理员root登录,创建新库、新表。
[root@host50 ~]# mysql -uroot -p123456 //访问服务
mysql> create database db10; //建库
Query OK, 1 row affected (0.05 sec)
mysql> use db10; //切换库
Database changed
mysql>
mysql> create table a(id int)engine=innodb; //建表并指定存储引擎
Query OK, 0 rows affected (0.52 sec)
二:关闭服务的自动提交功能
1)数据库管理员root登录,关闭服务的自动提交功能。
mysql> show variables like "%commit%"; //查看所有包涵commit 字样的变量
+-----------------------------------------+-------+
| Variable_name | Value |
+-----------------------------------------+-------+
| autocommit | ON | //自动提交功能开启
| binlog_group_commit_sync_delay | 0 |
| binlog_group_commit_sync_no_delay_count | 0 |
| binlog_order_commits | ON |
| innodb_api_bk_commit_interval | 5 |
| innodb_commit_concurrency | 0 |
| innodb_flush_log_at_trx_commit | 1 |
| slave_preserve_commit_order | OFF |
+-----------------------------------------+-------+
8 rows in set (0.01 sec)
mysql> set autocommit=off ; 关闭自动提交
Query OK, 0 rows affected (0.00 sec)
mysql> show variables like "autocommit"; //查看
+---------------+-------+
| Variable_name | Value |
+---------------+-------+
| autocommit | OFF | //已处于关闭状态
+---------------+-------+
1 row in set (0.00 sec)
mysql>
三:测试事务特性
1)插入新记录,不执行提交命令commit
mysql> insert into db10.a values(101); //插入记录
Query OK, 1 row affected (0.00 sec)
mysql> select * from db10.a ;//查看记录
+------+
| id |
+------+
| 101 |
+------+
1 row in set (0.00 sec)
mysql>
2)打开新终端访问数据服务,查看不到插入的数据
注:此处打开的终端称为终端2 , 此处之前终端被称为终端1
[root@host50 ~]# mysql -uroot -p123456
mysql> select * from db10.a; //没有记录
Empty set (0.00 sec)
mysql>
3)终端1 执行提交命令commit
mysql> select * from db10.a ;
+------+
| id |
+------+
| 101 |
+------+
1 row in set (0.00 sec)
mysql> commit ; 执行提交命令
Query OK, 0 rows affected (0.08 sec)
4)第终端2执行查看命令
mysql> select * from db10.a;
Empty set (0.00 sec)
mysql> select * from db10.a; //查看到数据
+------+
| id |
+------+
| 101 |
+------+
1 row in set (0.00 sec)
mysql>
5)在终端1删除记录 ,不执行提交命令commit
将/etc/passwd文件复制到/var/lib/mysql-files/目录下,
mysql> select * from db10.a ; //删除前查看
+------+
| id |
+------+
| 101 |
+------+
1 row in set (0.00 sec)
mysql> delete from db10.a ;//删除表记录
Query OK, 1 row affected (0.00 sec)
mysql>
mysql> select * from db10.a ; //查看不到记录
Empty set (0.00 sec)
6)在终端2 依然可以查看到记录
mysql> select * from db10.a;
+------+
| id |
+------+
| 101 |
+------+
1 row in set (0.00 sec)
mysql>
7)在终端1,执行回滚命令
mysql> select * from db10.a ; //回滚前查看
Empty set (0.00 sec)
mysql>
mysql> rollback ; //数据回滚
Query OK, 0 rows affected (0.03 sec)
mysql>
mysql> select * from db10.a ; //回滚后查看
+------+
| id |
+------+
| 101 |
+------+
1 row in set (0.00 sec)
mysql>
mysql> delete from db10.a ; //删除记录
Query OK, 1 row affected (0.00 sec)
mysql> commit ; //提交
Query OK, 0 rows affected (0.08 sec)
mysql>
mysql> rollback ; //数据回滚
Query OK, 0 rows affected (0.00 sec)
mysql> select * from db10.a ; //查看不到记录
Empty set (0.00 sec)
mysql>
8)在终端2 也查看不到记录
mysql> select * from db10.a;
Empty set (0.00 sec)
重要的事情说三遍
作为一个为linux奉献一生的码员,很是荣幸和骄傲,这里我总结了一些linux的精华,也就是速成文章,后面还会继续更新,望大家关注,绝对有用!