Repair Geometry
The main objective in CAD repair is to detect and close gaps between neighboring surfaces (faces). Typically, the procedure for geometry repair is as follows:
-
Build Topology builds curves and points, which will help to diagnose the model for geometrical problems. The curves will automatically take on colors to show their association to adjacent surfaces.
-
Repair any gaps or holes in the topology.
Build Topology
The Build Topology option creates a series of curves and points from surface edges and corners depending on the proximity of the surface edges to each other. If the curves are within a geometric tolerance, they are merged together as one. The curves are then displayed in a specific color to illustrate their connectivity in the surface data, which can be used to determine any gaps or holes in the geometry. 根据表面边缘的接近程度来确定是否合并成一条曲线,需要比较表面边缘的接近程度/缝隙大小与geometric tolerance(几何公差)之间关系