Job for network.service failed because the control process exited with error code问题解决

最新推荐文章于 2024-08-16 11:23:47 发布
最新推荐文章于 2024-08-16 11:23:47 发布
阅读量342 收藏
点赞数
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/weixin_43140795/article/details/118024994
版权

Job for network.service failed because the control process exited with error code. See “systemctl status network.service” and “journalctl -xe” for details. 问题解决

  1. 问题原因

    重装系统导致虚拟机mac发生改变

  2. 解决
    ①查看虚拟机mac

    ip addr //1查看虚拟机mac

    在这里插入图片描述②修改网卡mac

    vim /etc/sysconfig/network-scripts/ifcfg-ens33

    在这里插入图片描述

  3. 成功
    在这里插入图片描述

萌新1022
关注
Centos7：修改IP出现Job for network.service failed because the control process exited with error code问题
在路上
04-02 1165
centos7克隆之后，发现无ip。 因为是克隆的，首先修改一些配置文件。 vim /etc/sysconfig/network-scripts/ifcfg-xxx IPADDR=192.168.135.131 GATEWAY=192.168.135.2 NETMASK=255.255.255.0 DNS1=192.168.135.2 排查： 1、查看mac地址是否冲突 2...
安装新光口网卡报错：【Job for network.service failed because the control process exited with error code】解决方案
SuYu_Wang的博客
05-09 4693
新装网卡配置后无法启动网络。报错：Job for network.service failed because the control process exited with error code
Job for network.service failed because the control process exited with error code. See "systemc的解决办法
热门推荐
Spring Boot-Common On With You
09-22 3万+
问题概述 关于这个问题，博主是在虚拟机迁移的过程中遇到的，迁移完成后，需要对网络进行重新分配，配置完成后，重启网络服务时，报错：“ Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "jou...
redis启动失败报错：Job for redis.service failed because the control process exited with error code.
最新发布
天生我才总有用！！！
08-16 861
违反 SELinux 规则的行为只会记录到日志中。违反 SELinux 规则的行为将被阻止并记录到日志中。永久将SELinux 修改为 permissive(宽容模式) 或 disabled(关闭)原因：linux的一个安全子系统（SELinux）阻止了服务的启动。临时切换SELinux 的工作模式，重启服务器会还原。重启服务器，重启时间可能有点久，不要慌，慢慢等！希望对你们有帮助，烦人的问题统统远离！# 临时切换SELinux 为 宽容模式。查看SELinux 的工作模式。# 建议修改为宽容模式。
Job for network.service failed because the control process exited with error code
闲言
11-12 1929
错误产生环境 Centos 7下配置网卡 静态ip后产生 错误描述 ● network.service - LSB: Bring up/down networking Loaded: loaded (/etc/rc.d/init.d/network; bad; vendor preset: disabled) Active: failed (Result: exit-code) since 五 2017-07-14 19:01:47 CST; 1min 16s ago Docs: man:system
虚拟机报错：Job for network.service failed because the control process exited with error code
hzp666的博客
04-16 1509
1.错误： 今天又打开虚拟机准备搞大数据集群，由于有段时间没开机，开机后发现连不上网，ifconfig后连ip地址都没了： 2.解决方案： 网上有很多说法，大多都是重新vi /etc/sysconfig/network-scripts/ifcfg-ens33 配置静态ip的, 其实是网卡不工作了，最后只有一种方法管用： 3条指令： 3.原因： 在CentOS系统上，目前有NetworkManager和network两种网络管理工具。如果两种都配置会引起冲突。由于一般我们都是使用 network
两行命令解决Job for network.service failed because the control process exited with error code. 问题
qq_46034741的博客
03-22 1万+
在使用linux系统时我们修改network配置后经常要用到systemctl restart network命令重启网卡是修改生效，但是使用这个命令经常会包一下错误 Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details. 这是什么原因造成的呢？其
Job for network.service failed because the control process exited with error code. See “systemctl st
weixin_38996555的博客
06-02 9990
Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details.一、由于Xshell掉了，重新连接失败。先ping一下，看网络是否通的二、重启network服务，发现报错三、根据提示查看报错信息四、解决方法1.查验配置文件是否错误2.可能与NetworkManage
Linux虚拟机网络“Job for network.service failed because the control process exited with error code”
天青Azure的博客
10-07 721
问题描述： ping出现Network is unreachable 解决过程： 重启网卡：service network restart ,报错 Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details. 状态为failed sudo systemctl
Docker报错Job for docker.service failed because the control process exited with error code.
米粥粥的博客
10-14 3902
配置加速镜像之后启动docker一直报错 Job for docker.service failed because the control process exited with error code. See “systemctl status docker.service” and “journalctl -xe” for details. 查看docker状态之后显示如下信息 83906 ...
Job for network. service failed because the control process exited with error code,
08-22
"Job for network.service failed because the control process exited with error code"是一个网络服务启动失败的错误信息。这个错误信息说明网络服务的控制进程退出时返回了一个错误代码。当网络服务启动失败时，...
关于Job for network.service failed because the control process exited with error code.
weixin_69007450的博客
11-13 2万+
关于Job for network.service failed because the control process exited with error code.
解决centos重启网络报错：Job for network.service failed because the control process exited with error code.
MurmanskHarbor的博客
05-13 2667
解决centos重启网络报错：Job for network.service failed because the control process exited with error code.
Job for network.service failed because the control process exited with error code. See "systemctl st
qq_37161280的博客
06-17 4263
linux中配置了两块网卡来测试一个demo,然后配置文件出问题了，于是就崩了，下面是具体的信息 两块网卡的配置 [root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-ens33 [root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-ens38 [root@...
重启dhcp服务报错（Job for network.service failed because the control process exited with error code）
ycycyyc_的博客
07-06 1万+
问题描述 执行service network restart命令后出现下面的错误： Restarting network (via systemctl): Job for network.service failed because the control process exited with error code.See “systemctl status network.service” and “journalctl -xe” for details. 解决办法 1、是配置文件的原因。DHCP服务安
【Linux 日常运维2.0】&Job for network.service failed because the control process exited with error code.
张国荣家的弟弟
02-20 1877
文章目录问题描述解决办法总结： 问题描述 重启网卡时候报错service network restart：Job for network.service failed because the control process exited with error code. See "systemctl status network.service" and "journalctl -xe" for details. 重启失败，具体的提升如下： 解决办法 停止并禁用虚拟机NetworkManager服务
CentOS7 网卡重启失败！Job for network.service failed because the control process exited with error code...
小驴程序源
10-21 9602
问题描述： CentOS 7 重新设置了IP（static），重新启动网卡时出错。 执行命令：systemctl restart network 或者/etc/rc.d/init.d/network restart 提示：Job for network.service failed because the control process exited with error...
kali linux重启网卡失败：Job for networking.service failed because the control process exited with error...
qq_36485259的博客
01-06 1万+
1.取消勾选dhcp 2、配置静态ip（ip地址和默认网关查看虚拟网络编辑器） (1) vim /etc/network/interfaces (2) vim /etc/resolv.conf 3、 重启网卡配置，命令 systemctl restart networking 或者 service networking restart 4、报错：Job for network.service failed because the control process exited with
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值