@Causes of water leakage in water purifier

Causes of water leakage in water purifier

1. Quality problems of domestic water purifier itself, including quality of components of domestic water purifier, precision of assembly of domestic water purifier, pressure test and quality inspection. The components of domestic water purifier are mainly joints (connectors). Many of the household water purifiers reflecting water leakage according to consumers are joints with poor quality, pressure resistance, durability and water hammer impact. In addition, PE pipe used for connection is of poor quality, poor concentricity, uneven thickness of pipe wall and no pressure resistance.2. Another reason for the leakage of domestic water purifier may be that the production workers do not properly connect the internal parts of the domestic water purifier or do not connect the parts stably.3. In addition, during the installation of the purifier, the connection between the machine and the pipe is not tightened.4. The material quality of the outer tube of the household water purifier is poor, which will also cause water leakage.Ii. Water purifier leakage solutionHousehold water purifier leakage problems in general, there are parts of the quality problems, the improper operation of staff, and so on. The leakage prevention product leakage involves the production process problems such as material application and fitting assembly. The manufacturer should strictly control the purchase of raw materials, select high-quality raw material suppliers, check the materials sent by suppliers, and only allow the storage when 100% qualified.The first-line production workers will be trained systematically, so that the workers can remember the assembly method by heart, avoid the occurrence of leakage, screw not tightening, etc., and conduct the pressure test on the products that have been installed, so as to ensure that the products will not leak. In a company that pays attention to detail the quality of its products is not in doubt.Precautions for the daily use of water purifier1. The ultrafiltration membrane filter core shall be kept in a moist state after the water purifier is used. If the ultrafiltration membrane filter core dries, the water yield will drop sharply and cannot be recovered.2. Do not use the water purifier for more than three days. Repeat rinsing the water purifier for 2-5 minutes until the storage water in the water purifier is exhausted.3. In the case that the water supply is stopped, please first turn on the sewage faucet to drain out the sediment, rust, etc. in the water pipe before turning on the purification faucet to use clean water.4. The total water yield of the purifier is related to the inlet water quality of the purifier. If the inlet water quality of the purifier is good, the total water yield will rise; otherwise, if the inlet water quality is poor, the total water yield will decline, and the corresponding filter core service life will be slightly shorter.5. When using the purifier, rinse the purifier frequently, which can effectively extend the service life of the purifier.6. If the purifier is used for a long time, its water yield will gradually decline, but the water quality is still qualified, so it can be used safely.7. When the water purifier fails, please immediately close the water inlet valve of the tap water and cut off the water inflow of the water purifier. Do not dismantle it by yourself.Conclusion: it is particularly important for residents to buy household water purifiers with superior quality and ease of use. But again, don’t panic if your water purifier leaks. The proper way to deal with it is to turn off the power supply and water supply to avoid accidents. Remember: contact your after-sales service provider as often as possible.