2021-06-02

ABAQUS简支梁分析
第一次写CSDN的东西，练练手，以下内容仅供大家参考，如有表述不当请指出！
**关键词：**ABAQUS 梁单元弯矩 简支梁
本次计算任务是针对一个简支梁进行计算（单位长度简支梁，上负均布荷载2KN/m），已验证ABAQUS里梁单元弯矩的提取，以下是inp输入文件。较为关键的地方就是场输出部分要设置SM输出

	*Heading
** Job name: Beam_1 Model name: Model-1
** Generated by: Abaqus/CAE 6.14-1
*Preprint, echo=NO, model=NO, history=NO, contact=NO
**
** PARTS
**
*Part, name=Part-1
*Node
      1,         -0.5,           0.
      2,  -0.49000001,           0.
      3, -0.479999989,           0.
      4, -0.469999999,           0.
      5, -0.460000008,           0.
      6, -0.449999988,           0.
      7, -0.439999998,           0.
      8, -0.430000007,           0.
      9, -0.419999987,           0.
     10, -0.409999996,           0.
     11, -0.400000006,           0.
     12, -0.389999986,           0.
     13, -0.379999995,           0.
     14, -0.370000005,           0.
     15, -0.360000014,           0.
     16, -0.349999994,           0.
     17, -0.340000004,           0.
     18, -0.330000013,           0.
     19, -0.319999993,           0.
     20, -0.310000002,           0.
     21, -0.300000012,           0.
     22, -0.289999992,           0.
     23, -0.280000001,           0.
     24, -0.270000011,           0.
     25,  -0.25999999,           0.
     26,        -0.25,           0.
     27, -0.239999995,           0.
     28, -0.230000004,           0.
     29, -0.219999999,           0.
     30, -0.209999993,           0.
     31, -0.200000003,           0.
     32, -0.189999998,           0.
     33, -0.180000007,           0.
     34, -0.170000002,           0.
     35, -0.159999996,           0.
     36, -0.150000006,           0.
     37, -0.140000001,           0.
     38, -0.129999995,           0.
     39, -0.119999997,           0.
     40, -0.109999999,           0.
     41, -0.100000001,           0.
     42, -0.0900000036,           0.
     43, -0.0799999982,           0.
     44, -0.0700000003,           0.
     45, -0.0599999987,           0.
     46, -0.0500000007,           0.
     47, -0.0399999991,           0.
     48, -0.0299999993,           0.
     49, -0.0199999996,           0.
     50, -0.00999999978,           0.
     51,           0.,           0.
     52, 0.00999999978,           0.
     53, 0.0199999996,           0.
     54, 0.0299999993,           0.
     55, 0.0399999991,           0.
     56, 0.0500000007,           0.
     57, 0.0599999987,           0.
     58, 0.0700000003,           0.
     59, 0.0799999982,           0.
     60, 0.0900000036,           0.
     61,  0.100000001,           0.
     62,  0.109999999,           0.
     63,  0.119999997,           0.
     64,  0.129999995,           0.
     65,  0.140000001,           0.
     66,  0.150000006,           0.
     67,  0.159999996,           0.
     68,  0.170000002,           0.
     69,  0.180000007,           0.
     70,  0.189999998,           0.
     71,  0.200000003,           0.
     72,  0.209999993,           0.
     73,  0.219999999,           0.
     74,  0.230000004,           0.
     75,  0.239999995,           0.
     76,         0.25,           0.
     77,   0.25999999,           0.
     78,  0.270000011,           0.
     79,  0.280000001,           0.
     80,  0.289999992,           0.
     81,  0.300000012,           0.
     82,  0.310000002,           0.
     83,  0.319999993,           0.
     84,  0.330000013,           0.
     85,  0.340000004,           0.
     86,  0.349999994,           0.
     87,  0.360000014,           0.
     88,  0.370000005,           0.
     89,  0.379999995,           0.
     90,  0.389999986,           0.
     91,  0.400000006,           0.
     92,  0.409999996,           0.
     93,  0.419999987,           0.
     94,  0.430000007,           0.
     95,  0.439999998,           0.
     96,  0.449999988,           0.
     97,  0.460000008,           0.
     98,  0.469999999,           0.
     99,  0.479999989,           0.
    100,   0.49000001,           0.
    101,          0.5,           0.
*Element, type=B21
  1,   1,   2
  2,   2,   3
  3,   3,   4
  4,   4,   5
  5,   5,   6
  6,   6,   7
  7,   7,   8
  8,   8,   9
  9,   9,  10
 10,  10,  11
 11,  11,  12
 12,  12,  13
 13,  13,  14
 14,  14,  15
 15,  15,  16
 16,  16,  17
 17,  17,  18
 18,  18,  19
 19,  19,  20
 20,  20,  21
 21,  21,  22
 22,  22,  23
 23,  23,  24
 24,  24,  25
 25,  25,  26
 26,  26,  27
 27,  27,  28
 28,  28,  29
 29,  29,  30
 30,  30,  31
 31,  31,  32
 32,  32,  33
 33,  33,  34
 34,  34,  35
 35,  35,  36
 36,  36,  37
 37,  37,  38
 38,  38,  39
 39,  39,  40
 40,  40,  41
 41,  41,  42
 42,  42,  43
 43,  43,  44
 44,  44,  45
 45,  45,  46
 46,  46,  47
 47,  47,  48
 48,  48,  49
 49,  49,  50
 50,  50,  51
 51,  51,  52
 52,  52,  53
 53,  53,  54
 54,  54,  55
 55,  55,  56
 56,  56,  57
 57,  57,  58
 58,  58,  59
 59,  59,  60
 60,  60,  61
 61,  61,  62
 62,  62,  63
 63,  63,  64
 64,  64,  65
 65,  65,  66
 66,  66,  67
 67,  67,  68
 68,  68,  69
 69,  69,  70
 70,  70,  71
 71,  71,  72
 72,  72,  73
 73,  73,  74
 74,  74,  75
 75,  75,  76
 76,  76,  77
 77,  77,  78
 78,  78,  79
 79,  79,  80
 80,  80,  81
 81,  81,  82
 82,  82,  83
 83,  83,  84
 84,  84,  85
 85,  85,  86
 86,  86,  87
 87,  87,  88
 88,  88,  89
 89,  89,  90
 90,  90,  91
 91,  91,  92
 92,  92,  93
 93,  93,  94
 94,  94,  95
 95,  95,  96
 96,  96,  97
 97,  97,  98
 98,  98,  99
 99,  99, 100
100, 100, 101
*Nset, nset=_PickedSet2, internal, generate
   1,  101,    1
*Elset, elset=_PickedSet2, internal, generate
   1,  100,    1
** Section: Section-1  Profile: Profile-1
*Beam Section, elset=_PickedSet2, material=Material-1, temperature=GRADIENTS, section=RECT
0.1, 0.1
0.,0.,-1.
*End Part
**  
**
** ASSEMBLY
**
*Assembly, name=Assembly
**  
*Instance, name=Part-1-1, part=Part-1
*End Instance
**  
*Nset, nset=_PickedSet5, internal, instance=Part-1-1
 1,
*Nset, nset=_PickedSet6, internal, instance=Part-1-1
 101,
*Elset, elset=__PickedSurf4_SPOS, internal, instance=Part-1-1, generate
   1,  100,    1
*Surface, type=ELEMENT, name=_PickedSurf4, internal
__PickedSurf4_SPOS, SPOS
*End Assembly
** 
** MATERIALS
** 
*Material, name=Material-1
*Elastic
 2.1e+11, 0.3
** 
** BOUNDARY CONDITIONS
** 
** Name: BC-1 Type: Displacement/Rotation
*Boundary
_PickedSet5, 1, 1
_PickedSet5, 2, 2
** Name: BC-2 Type: Displacement/Rotation
*Boundary
_PickedSet6, 2, 2
** ----------------------------------------------------------------
** 
** STEP: Step-1
** 
*Step, name=Step-1, nlgeom=NO, inc=100000
*Static
1e-05, 1., 1e-08, 0.01
** 
** LOADS
** 
** Name: Load-1   Type: Pressure
*Dsload
_PickedSurf4, P, 2000.
** 
** OUTPUT REQUESTS
** 
*Restart, write, frequency=0
** 
** FIELD OUTPUT: F-Output-1
** 
*Output, field
*Node Output
CF, RF, RM, U
*Element Output, directions=YES
LE, PE, PEEQ, PEMAG, S, SF
*Contact Output
CDISP, CSTRESS
** 
** HISTORY OUTPUT: H-Output-1
** 
*Output, history, variable=PRESELECT
*End Step