stm32f103与bq78350通信smbus

最新推荐文章于 2024-05-17 09:24:27 发布

新新人类1QAQ

最新推荐文章于 2024-05-17 09:24:27 发布

阅读量456

点赞数

文章标签： stm32 单片机嵌入式硬件

本文链接：https://blog.csdn.net/weixin_43865298/article/details/129731103

版权

测试
在这里插入图片描述
初始化

void I2C_Configuration(void)
{
  GPIO_InitTypeDef GPIO_InitStructure;
  I2C_InitTypeDef I2C_InitStructure;

  /* Enable I2C and GPIOB clocks */
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_I2C1, ENABLE);
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);

  /* Configure I2C pins: SCL and SDA */
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_OD;
  GPIO_Init(GPIOB, &GPIO_InitStructure);

  /* I2C configuration */
  I2C_InitStructure.I2C_Mode = I2C_Mode_I2C;
  I2C_InitStructure.I2C_DutyCycle = I2C_DutyCycle_2;
  I2C_InitStructure.I2C_OwnAddress1 = 0; 
  I2C_InitStructure.I2C_Ack = I2C_Ack_Enable;
  I2C_InitStructure.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit;
  I2C_InitStructure.I2C_ClockSpeed = 50000; // 100kHz
  I2C_Init(I2C1, &I2C_InitStructure);

  /* Enable I2C */
  I2C_Cmd(I2C1, ENABLE);
}

读取多字节数据


```c
   while(len)
  {
    if(len == 1)
    {
      I2C_AcknowledgeConfig(I2C1, DISABLE);
      I2C_GenerateSTOP(I2C1, ENABLE);
    }
    if(I2C_CheckEvent(I2C1, I2C_EVENT_MASTER_BYTE_RECEIVED))//
    {
      *pBuffer = I2C_ReceiveData(I2C1);
      pBuffer++;
      len--;
    }
  }
  I2C_AcknowledgeConfig(I2C1, ENABLE);