RationalDMIS 2020运行程序时自动输出到Excel摸板

于 2021-05-24 13:57:47 发布
阅读量645 收藏 2
点赞数
分类专栏： RationalDMIS DMIS CMM
版权声明：本文为博主原创文章，遵循 CC 4.0 BY 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/weixin_43911798/article/details/117222247
版权
DMIS 同时被 3 个专栏收录
1351 篇文章 58 订阅
订阅专栏
RationalDMIS
836 篇文章 70 订阅
订阅专栏
CMM
663 篇文章 26 订阅
订阅专栏

在输出设置中，将设备定义一）文件选项中的Excel选中，在运动outPut语句时，会自动输出的Excel窗口

在这里插入图片描述

$$/*  Header
DMISMN/'Created by [爱科腾瑞科技(北京)有限公司-031520--DEMO-11021(力合)] on 星期一, 十月 28, 2019', 4.0
UNITS/MM, ANGDEC, MMPS
WKPLAN/XYPLAN
PRCOMP/ON
TECOMP/ON
FLY/1.0000
MODE/MAN
SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 10.0000
SNSET/CLRSRF, 15.0000
RECALL/D(MCS)
SNSLCT/S(L20-D1.0)
GEOALG/BF, LSTSQR
GEOALG/ANGLB, DEFALT
GEOALG/CIRCLE, LSTSQR
GEOALG/ARC, LSTSQR
GEOALG/PLANE, LSTSQR
$$
$$
$$*/
$$  TEXT/OPER, '粗建坐标系！'

MODE/MAN

F(PLN1)=FEAT/PLANE,CART,31.2887,31.3792,0.0000,0.0000,0.0000,1.0000
$$ Measurement points are created through actual points
MEAS/PLANE, F(PLN1), 3
  PTMEAS/CART, 25.5370, 77.1498, 0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART,  6.6366,  8.9779, 0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, 61.6927,  8.0100, 0.0000, 0.0000, 0.0000, 1.0000
ENDMES
D(CRD1) = DATSET/FA(PLN1), ZDIR
F(LN1)=FEAT/LINE,BND,CART,5.9123,0.0000,-2.3494,61.4287,0.0000,-2.3748,0.0000,-1.0000,0.0000
$$ Measurement points are created through actual points
MEAS/LINE, F(LN1), 2
  PTMEAS/CART,  5.9123, 0.0000, -2.3494, 0.0000, -1.0000, 0.0000
  PTMEAS/CART, 61.4287, 0.0000, -2.3748, 0.0000, -1.0000, 0.0000
ENDMES
F(PT1)=FEAT/POINT,CART,0.0000,5.0924,-3.0804,-1.0000,0.0000,0.0000
MEAS/POINT, F(PT1), 1
  PTMEAS/CART, 0.0000,5.0924,-3.0804,-1.0000,0.0000,0.0000
ENDMES
D(CRD2) = DATSET/FA(PLN1), ZDIR, ZORIG, FA(LN1), XDIR, YORIG, FA(PT1), XORIG
D(CRD2) = TRANS/ZORIG, -0, YORIG, -0, XORIG, -0
$$ Set.CAD2PCS.CADM_1
$$ Set.CADViewCenter.CADM_1

$$  TEXT/OPER, '精建坐标系！'

MODE/PROG,MAN

$$ MACRO: EASI_CLEARPLN_GOTO
$$ FUNCTION: CLEARANCE SURFACE IMPLEMENTATION
$$      Move machine CLEAR SURFACE DIST above the current clear surface 
$$		plane and then move machine parallel to the clear surface plane 
$$ 		ALL Macro parameters are in PCS and Current UNITS
$$ 		Last update: 3-1-04 Add mode checking. only works in PROG MODE
$$ 		Last update: 8-24-04 Clear position is based on the surface of
$$	
$$ This sample DMIS Macro is provided by External-Array Software, Inc.
$$ It should be modified for your own use. There is no guarantee for
$$ the quality of this Macro. November, 2003

M(EASI_CLEARPLN_GOTO) = MACRO/ISNOM, TARX, TARY, TARZ
	DECL/LOCAL, REAL, CCX, CCY, CCZ, CCI, CCJ, CCK
	DECL/LOCAL, REAL, CURX, CURY, CURZ, TD, CLRDIST, SDIAM
	DECL/LOCAL, CHAR, 255, CLRLABEL, FLABEL, MMODE, SNAME

	MMODE = VALUE/MODE
	CLRLABEL = VALUE/SNSET, CLRSRF
	
	IF/ ( (LEN(CLRLABEL) .GT. 0) .AND. (MMODE .EQ. 'PROG,MAN') )
		CLRDIST = VALUE/SNSET, CLRSRF, DIST
		FLABEL = ASSIGN/'FA'
		IF/ ISNOM .EQ. 0
			FLABEL = ASSIGN/'F'
		ENDIF
			
		CCX = OBTAIN/FLABEL(@CLRLABEL), 3
		CCY = OBTAIN/FLABEL(@CLRLABEL), 4
		CCZ = OBTAIN/FLABEL(@CLRLABEL), 5
		CCI = OBTAIN/FLABEL(@CLRLABEL), 6
		CCJ = OBTAIN/FLABEL(@CLRLABEL), 7
		CCK = OBTAIN/FLABEL(@CLRLABEL), 8
		
		SNAME = VALUE/SNSLCT
		SDIAM = OBTAIN/SS(SNAME), 8
		CCX = ASSIGN/CCX + CCI * SDIAM/2
		CCY = ASSIGN/CCY + CCJ * SDIAM/2
		CCZ = ASSIGN/CCZ + CCK * SDIAM/2

		CURX = VALUE/GOTOM, XAXIS
		CURY = VALUE/GOTOM, YAXIS
		CURZ = VALUE/GOTOM, ZAXIS
		
		TD = ASSIGN/(CURX - CCX) * CCI + (CURY - CCY) * CCJ + (CURZ - CCZ) * CCK
		IF/ TD .LT. CLRDIST
			TD = ASSIGN/(CLRDIST - TD)
			GOTO/CURX+CCI*TD, CURY+CCJ*TD, CURZ+CCK*TD
		ENDIF
		
		TD = ASSIGN/(TARX - CCX) * CCI + (TARY - CCY) * CCJ + (TARZ - CCZ) * CCK
		IF/ TD .LT. CLRDIST
			TD = ASSIGN/(CLRDIST - TD)
			GOTO/TARX+CCI*TD, TARY+CCJ*TD, TARZ+CCK*TD
		ENDIF
	ENDIF
	
ENDMAC
SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 10.0000
SNSET/CLRSRF, FA(PLN1), 15.0000
F(基准-A)=FEAT/PLANE,CART,32.2525,74.2477,0.0000,0.0000,0.0000,1.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, -2.4960, 5.0924, 15.4960
MEAS/PLANE, F(基准-A), 10
  GOTO/CART,   -2.4960,  5.0924, 15.4960
  GOTO/CART,    6.5168, 63.5173, 15.4960
  PTMEAS/CART,  6.5168, 63.5173,  0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, 25.9138, 89.2391,  0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, 56.9639, 94.9159,  0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, 61.1772, 70.0686,  0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, 29.3708, 58.4435,  0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, 58.2118, 40.9496,  0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, 58.2858, 26.4573,  0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, 58.5718,  5.1774,  0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART, 41.0717, 15.5438,  0.0000, 0.0000, 0.0000, 1.0000
  PTMEAS/CART,  5.6085,  8.4237,  0.0000, 0.0000, 0.0000, 1.0000
ENDMES
F(基准-B)=FEAT/LINE,BND,CART,4.0000,0.0000,-4.0000,60.0000,0.0000,-4.0000,0.0000,-1.0000,0.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 5.6085, 8.4237, 15.4960
MEAS/LINE, F(基准-B), 8
  GOTO/CART,    5.6085,  8.4237, 15.4960
  GOTO/CART,    4.0000, -2.4960, 15.4960
  PTMEAS/CART,  4.0000,  0.0000, -4.0000, 0.0000, -1.0000, 0.0000
  PTMEAS/CART, 12.0000,  0.0000, -4.0000, 0.0000, -1.0000, 0.0000
  PTMEAS/CART, 20.0000,  0.0000, -4.0000, 0.0000, -1.0000, 0.0000
  PTMEAS/CART, 28.0000,  0.0000, -4.0000, 0.0000, -1.0000, 0.0000
  PTMEAS/CART, 36.0000,  0.0000, -4.0000, 0.0000, -1.0000, 0.0000
  PTMEAS/CART, 44.0000,  0.0000, -4.0000, 0.0000, -1.0000, 0.0000
  PTMEAS/CART, 52.0000,  0.0000, -4.0000, 0.0000, -1.0000, 0.0000
  PTMEAS/CART, 60.0000,  0.0000, -4.0000, 0.0000, -1.0000, 0.0000
ENDMES
F(基准-C)=FEAT/LINE,BND,CART,0.0000,4.0000,-4.0000,0.0000,60.0000,-4.0000,-1.0000,0.0000,0.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 60.0000, -2.4960, 15.4960
MEAS/LINE, F(基准-C), 8
  GOTO/CART,   60.0000, -2.4960, 15.4960
  GOTO/CART,   -2.4960,  4.0000, 15.4960
  PTMEAS/CART,  0.0000,  4.0000, -4.0000, -1.0000, 0.0000, 0.0000
  PTMEAS/CART,  0.0000, 12.0000, -4.0000, -1.0000, 0.0000, 0.0000
  PTMEAS/CART,  0.0000, 20.0000, -4.0000, -1.0000, 0.0000, 0.0000
  PTMEAS/CART,  0.0000, 28.0000, -4.0000, -1.0000, 0.0000, 0.0000
  PTMEAS/CART,  0.0000, 36.0000, -4.0000, -1.0000, 0.0000, 0.0000
  PTMEAS/CART,  0.0000, 44.0000, -4.0000, -1.0000, 0.0000, 0.0000
  PTMEAS/CART,  0.0000, 52.0000, -4.0000, -1.0000, 0.0000, 0.0000
  PTMEAS/CART,  0.0000, 60.0000, -4.0000, -1.0000, 0.0000, 0.0000
ENDMES
F(PT_INTER1)=FEAT/POINT,CART,0.0000,0.0000,-4.0000,0.0000,0.0000,1.0000
CONST/POINT,F(PT_INTER1),INTOF,FA(基准-B),FA(基准-C)
D(CRD3) = DATSET/FA(基准-A), ZDIR, ZORIG, FA(基准-B), XDIR, FA(PT_INTER1), XORIG
D(CRD3) = TRANS/ZORIG, -0, YORIG, FA(PT_INTER1), XORIG, -0
$$ Set.CAD2PCS.CADM_1
$$ Set.CADViewCenter.CADM_1
F(基准-A)=FEAT/PLANE,CART,32.2525,74.2477,0.0000,0.0000,0.0000,1.0000
F(基准-B)=FEAT/LINE,BND,CART,4.0000,0.0000,-4.0000,60.0000,0.0000,-4.0000,0.0000,-1.0000,0.0000
F(基准-C)=FEAT/LINE,BND,CART,0.0000,4.0000,-4.0000,0.0000,60.0000,-4.0000,-1.0000,0.0000,0.0000
MODE/PROG,MAN
SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 10.0000
SNSET/CLRSRF, FA(基准-A), 15.0000
F(Φ20)=FEAT/CIRCLE,INNER,CART,31.5000,31.5000,-3.0000,0.0000,0.0000,1.0000, 20.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, -2.4960, 60.0000, 15.4960
MEAS/CIRCLE, F(Φ20), 8
  GOTO/CART,   -2.4960, 60.0000, 15.4960
  GOTO/CART,   25.7494, 36.3209, 15.4960
  GOTO/CART,   25.7494, 36.3209, 12.0000
  PTMEAS/CART, 23.8367, 37.9244, -3.0000,  0.7663, -0.6424,  0.0000
  GOTO/CART,   28.0320, 38.1546, -3.0000
  PTMEAS/CART, 30.6239, 41.4616, -3.0000,  0.0876, -0.9962,  0.0000
  GOTO/CART,   33.7533, 38.6577, -3.0000
  PTMEAS/CART, 37.9244, 39.1633, -3.0000, -0.6424, -0.7663, -0.0000
  GOTO/CART,   38.1546, 34.9680, -3.0000
  PTMEAS/CART, 41.4616, 32.3761, -3.0000, -0.9962, -0.0876, -0.0000
  GOTO/CART,   38.6577, 29.2467, -3.0000
  PTMEAS/CART, 39.1633, 25.0756, -3.0000, -0.7663,  0.6424,  0.0000
  GOTO/CART,   34.9680, 24.8454, -3.0000
  PTMEAS/CART, 32.3761, 21.5384, -3.0000, -0.0876,  0.9962,  0.0000
  GOTO/CART,   29.2467, 24.3423, -3.0000
  PTMEAS/CART, 25.0756, 23.8367, -3.0000,  0.6424,  0.7663,  0.0000
  GOTO/CART,   24.8454, 28.0320, -3.0000
  PTMEAS/CART, 21.5384, 30.6239, -3.0000,  0.9962,  0.0876,  0.0000
  GOTO/CART,   24.0249, 30.8426, 12.0000
ENDMES
F(Φ10)=FEAT/CIRCLE,INNER,CART,31.5000,31.5000,-11.0000,0.0000,0.0000,1.0000, 10.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 24.0249, 30.8426, 15.4960
MEAS/CIRCLE, F(Φ10), 5
  GOTO/CART,   24.0249, 30.8426,  15.4960
  GOTO/CART,   29.0056, 31.2807,  15.4960
  GOTO/CART,   29.0056, 31.2807,   4.0000
  PTMEAS/CART, 26.5192, 31.0620, -11.0000,  0.9962,  0.0876,  0.0000
  GOTO/CART,   29.0599, 32.0622, -11.0000
  GOTO/CART,   29.3531, 32.7887, -11.0000
  GOTO/CART,   29.8564, 33.3891, -11.0000
  PTMEAS/CART, 29.5443, 36.1017, -11.0000,  0.3911, -0.9203,  0.0000
  GOTO/CART,   31.2807, 33.9944, -11.0000
  GOTO/CART,   32.0622, 33.9401, -11.0000
  GOTO/CART,   32.7887, 33.6469, -11.0000
  PTMEAS/CART, 35.2721, 34.7820, -11.0000, -0.7544, -0.6564, -0.0000
  GOTO/CART,   33.8045, 32.4794, -11.0000
  GOTO/CART,   33.9944, 31.7193, -11.0000
  GOTO/CART,   33.9401, 30.9378, -11.0000
  PTMEAS/CART, 35.7870, 28.9267, -11.0000, -0.8574,  0.5147,  0.0000
  GOTO/CART,   33.1436, 29.6109, -11.0000
  GOTO/CART,   32.4794, 29.1955, -11.0000
  GOTO/CART,   31.7193, 29.0056, -11.0000
  PTMEAS/CART, 30.3774, 26.6276, -11.0000,  0.2245,  0.9745,  0.0000
  GOTO/CART,   30.9378, 29.0599,   4.0000
ENDMES
F(Φ10-1)=FEAT/CIRCLE,INNER,CART,31.5000,49.5000,-3.0000,0.0000,0.0000,1.0000, 10.0000
F(Φ10-2)=FEAT/CIRCLE,INNER,CART,15.9115,40.5000,-3.0000,0.0000,0.0000,1.0000, 10.0000
F(Φ10-3)=FEAT/CIRCLE,INNER,CART,15.9115,22.5000,-3.0000,0.0000,0.0000,1.0000, 10.0000
F(Φ10-4)=FEAT/CIRCLE,INNER,CART,31.5000,13.5000,-3.0000,0.0000,0.0000,1.0000, 10.0000
F(Φ10-5)=FEAT/CIRCLE,INNER,CART,47.0885,22.5000,-3.0000,0.0000,0.0000,1.0000, 10.0000
F(Φ10-6)=FEAT/CIRCLE,INNER,CART,47.0885,40.5000,-3.0000,0.0000,0.0000,1.0000, 10.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 34.0040, 49.5000, -3.0000
MEAS/CIRCLE, F(Φ10-1), 8
  PTMEAS/CART, 36.5000, 49.5000, -3.0000, -1.0000, -0.0000, -0.0000
  GOTO/ARC,    33.2706, 51.2706, -3.0000, 33.8134, 50.4582, -3.0000
  PTMEAS/CART, 35.0355, 53.0355, -3.0000, -0.7071, -0.7071, -0.0000
  GOTO/ARC,    31.5000, 52.0040, -3.0000, 32.4582, 51.8134, -3.0000
  PTMEAS/CART, 31.5000, 54.5000, -3.0000, -0.0000, -1.0000, -0.0000
  GOTO/ARC,    29.7294, 51.2706, -3.0000, 30.5418, 51.8134, -3.0000
  PTMEAS/CART, 27.9645, 53.0355, -3.0000,  0.7071, -0.7071,  0.0000
  GOTO/ARC,    28.9960, 49.5000, -3.0000, 29.1866, 50.4582, -3.0000
  PTMEAS/CART, 26.5000, 49.5000, -3.0000,  1.0000, -0.0000,  0.0000
  GOTO/ARC,    29.7294, 47.7294, -3.0000, 29.1866, 48.5418, -3.0000
  PTMEAS/CART, 27.9645, 45.9645, -3.0000,  0.7071,  0.7071,  0.0000
  GOTO/ARC,    31.5000, 46.9960, -3.0000, 30.5418, 47.1866, -3.0000
  PTMEAS/CART, 31.5000, 44.5000, -3.0000,  0.0000,  1.0000,  0.0000
  GOTO/ARC,    33.2706, 47.7294, -3.0000, 32.4582, 47.1866, -3.0000
  PTMEAS/CART, 35.0355, 45.9645, -3.0000, -0.7071,  0.7071,  0.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 33.2706, 47.7294, -3.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 18.4155, 40.5000, -3.0000
MEAS/CIRCLE, F(Φ10-2), 8
  PTMEAS/CART, 20.9115, 40.5000, -3.0000, -1.0000, -0.0000, -0.0000
  GOTO/ARC,    17.6821, 42.2706, -3.0000, 18.2249, 41.4582, -3.0000
  PTMEAS/CART, 19.4471, 44.0355, -3.0000, -0.7071, -0.7071, -0.0000
  GOTO/ARC,    15.9115, 43.0040, -3.0000, 16.8698, 42.8134, -3.0000
  PTMEAS/CART, 15.9115, 45.5000, -3.0000, -0.0000, -1.0000, -0.0000
  GOTO/ARC,    14.1410, 42.2706, -3.0000, 14.9533, 42.8134, -3.0000
  PTMEAS/CART, 12.3760, 44.0355, -3.0000,  0.7071, -0.7071,  0.0000
  GOTO/ARC,    13.4076, 40.5000, -3.0000, 13.5982, 41.4582, -3.0000
  PTMEAS/CART, 10.9115, 40.5000, -3.0000,  1.0000, -0.0000,  0.0000
  GOTO/ARC,    14.1410, 38.7294, -3.0000, 13.5982, 39.5418, -3.0000
  PTMEAS/CART, 12.3760, 36.9645, -3.0000,  0.7071,  0.7071,  0.0000
  GOTO/ARC,    15.9115, 37.9960, -3.0000, 14.9533, 38.1866, -3.0000
  PTMEAS/CART, 15.9115, 35.5000, -3.0000,  0.0000,  1.0000,  0.0000
  GOTO/ARC,    17.6821, 38.7294, -3.0000, 16.8698, 38.1866, -3.0000
  PTMEAS/CART, 19.4471, 36.9645, -3.0000, -0.7071,  0.7071,  0.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 17.6821, 38.7294, -3.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 18.4155, 22.5000, -3.0000
MEAS/CIRCLE, F(Φ10-3), 8
  PTMEAS/CART, 20.9115, 22.5000, -3.0000, -1.0000, -0.0000, -0.0000
  GOTO/ARC,    17.6821, 24.2706, -3.0000, 18.2249, 23.4582, -3.0000
  PTMEAS/CART, 19.4471, 26.0355, -3.0000, -0.7071, -0.7071, -0.0000
  GOTO/ARC,    15.9115, 25.0040, -3.0000, 16.8698, 24.8134, -3.0000
  PTMEAS/CART, 15.9115, 27.5000, -3.0000, -0.0000, -1.0000, -0.0000
  GOTO/ARC,    14.1410, 24.2706, -3.0000, 14.9533, 24.8134, -3.0000
  PTMEAS/CART, 12.3760, 26.0355, -3.0000,  0.7071, -0.7071,  0.0000
  GOTO/ARC,    13.4076, 22.5000, -3.0000, 13.5982, 23.4582, -3.0000
  PTMEAS/CART, 10.9115, 22.5000, -3.0000,  1.0000, -0.0000,  0.0000
  GOTO/ARC,    14.1410, 20.7294, -3.0000, 13.5982, 21.5418, -3.0000
  PTMEAS/CART, 12.3760, 18.9645, -3.0000,  0.7071,  0.7071,  0.0000
  GOTO/ARC,    15.9115, 19.9960, -3.0000, 14.9533, 20.1866, -3.0000
  PTMEAS/CART, 15.9115, 17.5000, -3.0000,  0.0000,  1.0000,  0.0000
  GOTO/ARC,    17.6821, 20.7294, -3.0000, 16.8698, 20.1866, -3.0000
  PTMEAS/CART, 19.4471, 18.9645, -3.0000, -0.7071,  0.7071,  0.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 17.6821, 20.7294, -3.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 34.0040, 13.5000, -3.0000
MEAS/CIRCLE, F(Φ10-4), 8
  PTMEAS/CART, 36.5000, 13.5000, -3.0000, -1.0000, -0.0000, -0.0000
  GOTO/ARC,    33.2706, 15.2706, -3.0000, 33.8134, 14.4582, -3.0000
  PTMEAS/CART, 35.0355, 17.0355, -3.0000, -0.7071, -0.7071, -0.0000
  GOTO/ARC,    31.5000, 16.0040, -3.0000, 32.4582, 15.8134, -3.0000
  PTMEAS/CART, 31.5000, 18.5000, -3.0000, -0.0000, -1.0000, -0.0000
  GOTO/ARC,    29.7294, 15.2706, -3.0000, 30.5418, 15.8134, -3.0000
  PTMEAS/CART, 27.9645, 17.0355, -3.0000,  0.7071, -0.7071,  0.0000
  GOTO/ARC,    28.9960, 13.5000, -3.0000, 29.1866, 14.4582, -3.0000
  PTMEAS/CART, 26.5000, 13.5000, -3.0000,  1.0000, -0.0000,  0.0000
  GOTO/ARC,    29.7294, 11.7294, -3.0000, 29.1866, 12.5418, -3.0000
  PTMEAS/CART, 27.9645,  9.9645, -3.0000,  0.7071,  0.7071,  0.0000
  GOTO/ARC,    31.5000, 10.9960, -3.0000, 30.5418, 11.1866, -3.0000
  PTMEAS/CART, 31.5000,  8.5000, -3.0000,  0.0000,  1.0000,  0.0000
  GOTO/ARC,    33.2706, 11.7294, -3.0000, 32.4582, 11.1866, -3.0000
  PTMEAS/CART, 35.0355,  9.9645, -3.0000, -0.7071,  0.7071,  0.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 33.2706, 11.7294, -3.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 49.5924, 22.5000, -3.0000
MEAS/CIRCLE, F(Φ10-5), 8
  PTMEAS/CART, 52.0885, 22.5000, -3.0000, -1.0000, -0.0000, -0.0000
  GOTO/ARC,    48.8590, 24.2706, -3.0000, 49.4018, 23.4582, -3.0000
  PTMEAS/CART, 50.6240, 26.0355, -3.0000, -0.7071, -0.7071, -0.0000
  GOTO/ARC,    47.0885, 25.0040, -3.0000, 48.0467, 24.8134, -3.0000
  PTMEAS/CART, 47.0885, 27.5000, -3.0000, -0.0000, -1.0000, -0.0000
  GOTO/ARC,    45.3179, 24.2706, -3.0000, 46.1302, 24.8134, -3.0000
  PTMEAS/CART, 43.5529, 26.0355, -3.0000,  0.7071, -0.7071,  0.0000
  GOTO/ARC,    44.5845, 22.5000, -3.0000, 44.7751, 23.4582, -3.0000
  PTMEAS/CART, 42.0885, 22.5000, -3.0000,  1.0000, -0.0000,  0.0000
  GOTO/ARC,    45.3179, 20.7294, -3.0000, 44.7751, 21.5418, -3.0000
  PTMEAS/CART, 43.5529, 18.9645, -3.0000,  0.7071,  0.7071,  0.0000
  GOTO/ARC,    47.0885, 19.9960, -3.0000, 46.1302, 20.1866, -3.0000
  PTMEAS/CART, 47.0885, 17.5000, -3.0000,  0.0000,  1.0000,  0.0000
  GOTO/ARC,    48.8590, 20.7294, -3.0000, 48.0467, 20.1866, -3.0000
  PTMEAS/CART, 50.6240, 18.9645, -3.0000, -0.7071,  0.7071,  0.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 48.8590, 20.7294, -3.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 49.5925, 40.5000, -3.0000
MEAS/CIRCLE, F(Φ10-6), 8
  PTMEAS/CART, 52.0885, 40.5000, -3.0000, -1.0000, -0.0000, -0.0000
  GOTO/ARC,    48.8591, 42.2706, -3.0000, 49.4019, 41.4582, -3.0000
  PTMEAS/CART, 50.6240, 44.0355, -3.0000, -0.7071, -0.7071, -0.0000
  GOTO/ARC,    47.0885, 43.0040, -3.0000, 48.0467, 42.8134, -3.0000
  PTMEAS/CART, 47.0885, 45.5000, -3.0000, -0.0000, -1.0000, -0.0000
  GOTO/ARC,    45.3179, 42.2706, -3.0000, 46.1303, 42.8134, -3.0000
  PTMEAS/CART, 43.5530, 44.0355, -3.0000,  0.7071, -0.7071,  0.0000
  GOTO/ARC,    44.5845, 40.5000, -3.0000, 44.7751, 41.4582, -3.0000
  PTMEAS/CART, 42.0885, 40.5000, -3.0000,  1.0000, -0.0000,  0.0000
  GOTO/ARC,    45.3179, 38.7294, -3.0000, 44.7751, 39.5418, -3.0000
  PTMEAS/CART, 43.5530, 36.9645, -3.0000,  0.7071,  0.7071,  0.0000
  GOTO/ARC,    47.0885, 37.9960, -3.0000, 46.1303, 38.1866, -3.0000
  PTMEAS/CART, 47.0885, 35.5000, -3.0000,  0.0000,  1.0000,  0.0000
  GOTO/ARC,    48.8591, 38.7294, -3.0000, 48.0467, 38.1866, -3.0000
  PTMEAS/CART, 50.6240, 36.9645, -3.0000, -0.7071,  0.7071,  0.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 48.8591, 38.7294, -3.0000
F(SLT1)=FEAT/CPARLN,INNER,ROUND,CART,41.5000,65.1000,-3.0000,0.0000,0.0000,1.0000,0.7071,-0.7071,0.0000, 35.0000, 10.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 48.8591, 38.7294, 15.4960
MEAS/CPARLN, F(SLT1), 9
  GOTO/CART,   48.8591, 38.7294, 15.4960
  GOTO/CART,   47.6900, 62.4512, 15.4960
  PTMEAS/CART, 49.4550, 64.2161, -3.0000, -0.7071, -0.7071,  0.0000
  PTMEAS/CART, 40.6161, 73.0550, -3.0000, -0.7071, -0.7071,  0.0000
  PTMEAS/CART, 31.0884, 78.6850, -3.0000,  0.3145, -0.9493,  0.0000
  PTMEAS/CART, 27.9150, 75.5116, -3.0000,  0.9493, -0.3145,  0.0000
  PTMEAS/CART, 33.5450, 65.9839, -3.0000,  0.7071,  0.7071,  0.0000
  PTMEAS/CART, 42.3839, 57.1450, -3.0000,  0.7071,  0.7071,  0.0000
  PTMEAS/CART, 51.9116, 51.5150, -3.0000, -0.3145,  0.9493,  0.0000
  PTMEAS/CART, 55.0850, 54.6884, -3.0000, -0.9493,  0.3145,  0.0000
  PTMEAS/CART, 54.4346, 59.1290, -3.0000, -0.8192, -0.5736, -0.0000
ENDMES
F(CON1)=FEAT/CONE,INNER,CART,51.5000,83.5000,-9.0000,0.0000,0.0000,1.0000, 90.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 54.9209, 83.5000, -2.0492
MEAS/CONE, F(CON1), 10
  PTMEAS/CART, 56.6859, 83.5000, -3.8141, -0.7071,  0.0000,  0.7071
  GOTO/ARC,    52.5571, 86.7535, -2.0492, 54.2676, 85.5108, -2.0492
  PTMEAS/CART, 53.1025, 88.4321, -3.8141, -0.2185, -0.6725,  0.7071
  GOTO/ARC,    48.7324, 85.5108, -2.0492, 50.4429, 86.7535, -2.0492
  PTMEAS/CART, 47.3045, 86.5482, -3.8141,  0.5721, -0.4156,  0.7071
  GOTO/ARC,    48.7324, 81.4892, -2.0492, 48.0791, 83.5000, -2.0492
  PTMEAS/CART, 47.3045, 80.4518, -3.8141,  0.5721,  0.4156,  0.7071
  GOTO/ARC,    52.5571, 80.2465, -2.0492, 50.4429, 80.2465, -2.0492
  PTMEAS/CART, 53.1025, 78.5679, -3.8141, -0.2185,  0.6725,  0.7071
  PTMEAS/CART, 53.9568, 75.9388, -1.0497, -0.2185,  0.6725,  0.7071
  GOTO/ARC,    46.4959, 79.8643,  0.7153, 49.5886, 77.6174,  0.7153
  PTMEAS/CART, 45.0681, 78.8269, -1.0497,  0.5721,  0.4156,  0.7071
  GOTO/ARC,    46.4959, 87.1357,  0.7153, 45.3146, 83.5000,  0.7153
  PTMEAS/CART, 45.0681, 88.1731, -1.0497,  0.5721, -0.4156,  0.7071
  GOTO/ARC,    53.4114, 89.3826,  0.7153, 49.5886, 89.3826,  0.7153
  PTMEAS/CART, 53.9568, 91.0612, -1.0497, -0.2185, -0.6725,  0.7071
  GOTO/ARC,    57.6854, 83.5000,  0.7153, 56.5041, 87.1357,  0.7153
  PTMEAS/CART, 59.4503, 83.5000, -1.0497, -0.7071,  0.0000,  0.7071
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 57.6854, 83.5000, 0.7153
F(SLT2)=FEAT/CPARLN,INNER,FLAT,CART,17.6000,65.1000,-3.0000,0.0000,0.0000,1.0000,0.0000,1.0000,0.0000, 11.08, 10.81
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 57.6854, 83.5000, 15.4960
MEAS/CPARLN, F(SLT2), 9
  GOTO/CART,   57.6854, 83.5000, 15.4960
  GOTO/CART,   14.6894, 67.8641, 15.4960
  PTMEAS/CART, 12.1934, 67.8641, -3.0000,  1.0000,  0.0000, 0.0000
  PTMEAS/CART, 12.1934, 65.1000, -3.0000,  1.0000,  0.0000, 0.0000
  PTMEAS/CART, 12.1934, 62.3359, -3.0000,  1.0000,  0.0000, 0.0000
  PTMEAS/CART, 15.7978, 59.5718, -3.0000,  0.0000,  1.0000, 0.0000
  PTMEAS/CART, 19.4022, 59.5718, -3.0000,  0.0000,  1.0000, 0.0000
  PTMEAS/CART, 23.0066, 63.2573, -3.0000, -1.0000,  0.0000, 0.0000
  PTMEAS/CART, 23.0066, 66.9427, -3.0000, -1.0000,  0.0000, 0.0000
  PTMEAS/CART, 19.4022, 70.6282, -3.0000,  0.0000, -1.0000, 0.0000
  PTMEAS/CART, 15.7978, 70.6282, -3.0000,  0.0000, -1.0000, 0.0000
ENDMES
F(Φ6.8)=FEAT/CIRCLE,INNER,CART,52.4500,11.5500,-3.0000,0.0000,0.0000,1.0000, 6.8000
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 53.3520, 11.5500, -3.0000
MEAS/CIRCLE, F(Φ6.8), 5
  PTMEAS/CART, 55.8480, 11.5500, -3.0000, -1.0000, -0.0000, -0.0000
  GOTO/ARC,    52.7287, 12.4078, -3.0000, 53.1797, 12.0802, -3.0000
  PTMEAS/CART, 53.5000, 14.7817, -3.0000, -0.3090, -0.9511, -0.0000
  GOTO/ARC,    51.7203, 12.0802, -3.0000, 52.1713, 12.4078, -3.0000
  PTMEAS/CART, 49.7010, 13.5473, -3.0000,  0.8090, -0.5878,  0.0000
  GOTO/ARC,    51.7203, 11.0198, -3.0000, 51.5480, 11.5500, -3.0000
  PTMEAS/CART, 49.7010,  9.5527, -3.0000,  0.8090,  0.5878,  0.0000
  GOTO/ARC,    52.7287, 10.6922, -3.0000, 52.1713, 10.6922, -3.0000
  PTMEAS/CART, 53.5000,  8.3183, -3.0000, -0.3090,  0.9511,  0.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 52.7287, 10.6922, -3.0000
F(Φ36)=FEAT/CIRCLE,OUTER,CART,31.5000,31.5000,-3.0000,0.0000,0.0000,1.0000, 36.0000
CONST/CIRCLE,F(Φ36),BF,FA(Φ10-1),FA(Φ10-2),FA(Φ10-3),FA(Φ10-4),FA(Φ10-5),FA(Φ10-6)
TEXT/OUTFIL, '孔组评价如下：'
DATDEF/FA(基准-A), DAT(A)
DATDEF/FA(基准-B), DAT(B)
DATDEF/FA(基准-C), DAT(C)
F(Φ8)=FEAT/CIRCLE,INNER,CART,51.5000,83.5000,-8.0000,0.0000,0.0000,1.0000, 8.0000

$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 53.0040, 83.5000, -8.0000
MEAS/CIRCLE, F(Φ8), 5
  PTMEAS/CART, 55.5000, 83.5000, -8.0000, -1.0000, -0.0000, -0.0000
  GOTO/ARC,    51.9648, 84.9304, -8.0000, 52.7168, 84.3840, -8.0000
  PTMEAS/CART, 52.7361, 87.3042, -8.0000, -0.3090, -0.9511, -0.0000
  GOTO/ARC,    50.2832, 84.3840, -8.0000, 51.0352, 84.9304, -8.0000
  PTMEAS/CART, 48.2639, 85.8511, -8.0000,  0.8090, -0.5878,  0.0000
  GOTO/ARC,    50.2832, 82.6160, -8.0000, 49.9960, 83.5000, -8.0000
  PTMEAS/CART, 48.2639, 81.1489, -8.0000,  0.8090,  0.5878,  0.0000
  GOTO/ARC,    51.9648, 82.0696, -8.0000, 51.0352, 82.0696, -8.0000
  PTMEAS/CART, 52.7361, 79.6958, -8.0000, -0.3090,  0.9511,  0.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 51.9648, 82.0696, -8.0000
D(CRD4) = TRANS/XORIG, FA(Φ10), YORIG, FA(Φ10)
RECALL/D(CRD3)
F(点-1)=FEAT/POINT,CART,59.9220,95.5983,0.0000,0.0000,0.0000,1.0000
F(点-2)=FEAT/POINT,CART,40.0933,95.4347,0.0000,0.0000,0.0000,1.0000
F(点-3)=FEAT/POINT,CART,23.8159,95.2581,0.0000,0.0000,0.0000,1.0000
F(点-4)=FEAT/POINT,CART,14.7827,76.7743,0.0000,0.0000,0.0000,1.0000
F(点-5)=FEAT/POINT,CART,31.4855,85.0088,0.0000,0.0000,0.0000,1.0000
F(点-6)=FEAT/POINT,CART,45.4247,73.2951,0.0000,0.0000,0.0000,1.0000
F(点-7)=FEAT/POINT,CART,59.9606,69.6656,0.0000,0.0000,0.0000,1.0000
F(点-8)=FEAT/POINT,CART,59.2254,54.3857,0.0000,0.0000,0.0000,1.0000
F(点-9)=FEAT/POINT,CART,28.8991,60.6704,0.0000,0.0000,0.0000,1.0000
F(点-10)=FEAT/POINT,CART,6.3588,62.7726,0.0000,0.0000,0.0000,1.0000
F(点-11)=FEAT/POINT,CART,4.0933,49.2002,0.0000,0.0000,0.0000,1.0000
F(点-12)=FEAT/POINT,CART,22.5121,49.9639,0.0000,0.0000,0.0000,1.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 59.9220, 95.5983, 2.4960
MEAS/POINT, F(点-1), 1
  GOTO/CART, 59.9220,95.5983,15.4960
  PTMEAS/CART, 59.9220,95.5983,0.0000,0.0000,0.0000,1.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 40.0933, 95.4347, 2.4960
MEAS/POINT, F(点-2), 1
  GOTO/CART, 40.0933,95.4347,15.4960
  PTMEAS/CART, 40.0933,95.4347,0.0000,0.0000,0.0000,1.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 23.8159, 95.2581, 2.4960
MEAS/POINT, F(点-3), 1
  GOTO/CART, 23.8159,95.2581,15.4960
  PTMEAS/CART, 23.8159,95.2581,0.0000,0.0000,0.0000,1.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 14.7827, 76.7743, 2.4960
MEAS/POINT, F(点-4), 1
  GOTO/CART, 14.7827,76.7743,15.4960
  PTMEAS/CART, 14.7827,76.7743,0.0000,0.0000,0.0000,1.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 31.4855, 85.0088, 2.4960
MEAS/POINT, F(点-5), 1
  GOTO/CART, 31.4855,85.0088,15.4960
  PTMEAS/CART, 31.4855,85.0088,0.0000,0.0000,0.0000,1.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 45.4247, 73.2951, 2.4960
MEAS/POINT, F(点-6), 1
  GOTO/CART, 45.4247,73.2951,15.4960
  PTMEAS/CART, 45.4247,73.2951,0.0000,0.0000,0.0000,1.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 59.9606, 69.6656, 2.4960
MEAS/POINT, F(点-7), 1
  GOTO/CART, 59.9606,69.6656,15.4960
  PTMEAS/CART, 59.9606,69.6656,0.0000,0.0000,0.0000,1.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 59.2254, 54.3857, 2.4960
MEAS/POINT, F(点-8), 1
  GOTO/CART, 59.2254,54.3857,15.4960
  PTMEAS/CART, 59.2254,54.3857,0.0000,0.0000,0.0000,1.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 28.8991, 60.6704, 2.4960
MEAS/POINT, F(点-9), 1
  GOTO/CART, 28.8991,60.6704,15.4960
  PTMEAS/CART, 28.8991,60.6704,0.0000,0.0000,0.0000,1.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 6.3588, 62.7726, 2.4960
MEAS/POINT, F(点-10), 1
  GOTO/CART, 6.3588,62.7726,15.4960
  PTMEAS/CART, 6.3588,62.7726,0.0000,0.0000,0.0000,1.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 4.0933, 49.2002, 2.4960
MEAS/POINT, F(点-11), 1
  GOTO/CART, 4.0933,49.2002,15.4960
  PTMEAS/CART, 4.0933,49.2002,0.0000,0.0000,0.0000,1.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 22.5121, 49.9639, 2.4960
MEAS/POINT, F(点-12), 1
  GOTO/CART, 22.5121,49.9639,15.4960
  PTMEAS/CART, 22.5121,49.9639,0.0000,0.0000,0.0000,1.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 39.5591, 41.0794, 2.4960
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 56.7067, 34.3081, 2.4960
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 59.4288, 20.5488, 2.4960
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 41.0726, 17.1093, 2.4960
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 23.3098, 16.5783, 2.4960
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 16.3170, 31.0744, 2.4960
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 7.6820, 32.2785, 2.4960
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 4.5727, 16.4265, 2.4960
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 3.3303, 8.4738, 2.4960
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 18.8765, 9.0503, 2.4960
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 37.2364, 4.8369, 2.4960
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 46.4172, 6.5159, 2.4960
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 59.8126, 4.9307, 2.4960
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 60.2066, 12.7377, 2.4960
F(PATERN1)=FEAT/PATERN,F(点-1),F(点-2),F(点-3),F(点-4),F(点-5),F(点-6),F(点-7),F(点-8),F(点-9),F(点-10),F(点-11),F(点-12),F(点-13),F(点-14),F(点-15),F(点-16),F(点-17),F(点-18),F(点-19),F(点-20),F(点-21),F(点-22),F(点-23),F(点-24),F(点-25),F(点-26)
F(MP-1)=FEAT/POINT,CART,72.3976,13.9807,-5.1463,0.7744,0.0000,0.6328
F(MP-2)=FEAT/POINT,CART,76.6393,14.0760,-9.5026,0.6532,0.0000,0.7572
F(MP-3)=FEAT/POINT,CART,82.1403,14.0807,-13.3914,0.4960,0.0000,0.8683
F(MP-4)=FEAT/POINT,CART,88.1779,21.7542,-16.1181,0.3235,0.0000,0.9462
F(MP-5)=FEAT/POINT,CART,81.8817,23.0466,-13.2423,0.5034,0.0000,0.8641
F(MP-6)=FEAT/POINT,CART,76.0483,24.1985,-8.9811,0.6700,0.0000,0.7423
F(MP-7)=FEAT/POINT,CART,72.6767,26.0070,-5.4836,0.7664,0.0000,0.6424
F(MP-8)=FEAT/POINT,CART,73.6659,33.3166,-6.6135,0.7381,0.0000,0.6747
F(MP-9)=FEAT/POINT,CART,80.3680,34.5487,-12.3082,0.5466,0.0000,0.8374
F(MP-10)=FEAT/POINT,CART,85.5438,30.6315,-15.0971,0.3987,0.0000,0.9171
F(MP-11)=FEAT/POINT,CART,93.4730,28.0470,-17.4772,0.1722,0.0000,0.9851
F(MP-12)=FEAT/POINT,CART,94.8864,37.6552,-17.6946,0.1318,0.0000,0.9913
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 74.3304, 13.9807, -3.5669
MEAS/POINT, F(MP-1), 1
  GOTO/CART, 74.3304,13.9807,15.4960
  PTMEAS/CART, 72.3976,13.9807,-5.1463,0.7744,0.0000,0.6328
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 78.2696, 14.0760, -7.6126
MEAS/POINT, F(MP-2), 1
  GOTO/CART, 78.2696,14.0760,15.4960
  PTMEAS/CART, 76.6393,14.0760,-9.5026,0.6532,0.0000,0.7572
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 83.3783, 14.0807, -11.2241
MEAS/POINT, F(MP-3), 1
  GOTO/CART, 83.3783,14.0807,15.4960
  PTMEAS/CART, 82.1403,14.0807,-13.3914,0.4960,0.0000,0.8683
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 88.9853, 21.7542, -13.7563
MEAS/POINT, F(MP-4), 1
  GOTO/CART, 88.9853,21.7542,15.4960
  PTMEAS/CART, 88.1779,21.7542,-16.1181,0.3235,0.0000,0.9462
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 83.1381, 23.0466, -11.0856
MEAS/POINT, F(MP-5), 1
  GOTO/CART, 83.1381,23.0466,15.4960
  PTMEAS/CART, 81.8817,23.0466,-13.2423,0.5034,0.0000,0.8641
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 77.7208, 24.1985, -7.1283
MEAS/POINT, F(MP-6), 1
  GOTO/CART, 77.7208,24.1985,15.4960
  PTMEAS/CART, 76.0483,24.1985,-8.9811,0.6700,0.0000,0.7423
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 74.5896, 26.0070, -3.8802
MEAS/POINT, F(MP-7), 1
  GOTO/CART, 74.5896,26.0070,15.4960
  PTMEAS/CART, 72.6767,26.0070,-5.4836,0.7664,0.0000,0.6424
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 75.5082, 33.3166, -4.9295
MEAS/POINT, F(MP-8), 1
  GOTO/CART, 75.5082,33.3166,15.4960
  PTMEAS/CART, 73.6659,33.3166,-6.6135,0.7381,0.0000,0.6747
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 81.7324, 34.5487, -10.2181
MEAS/POINT, F(MP-9), 1
  GOTO/CART, 81.7324,34.5487,15.4960
  PTMEAS/CART, 80.3680,34.5487,-12.3082,0.5466,0.0000,0.8374
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 86.5391, 30.6315, -12.8081
MEAS/POINT, F(MP-10), 1
  GOTO/CART, 86.5391,30.6315,15.4960
  PTMEAS/CART, 85.5438,30.6315,-15.0971,0.3987,0.0000,0.9171
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 93.9028, 28.0470, -15.0184
MEAS/POINT, F(MP-11), 1
  GOTO/CART, 93.9028,28.0470,15.4960
  PTMEAS/CART, 93.4730,28.0470,-17.4772,0.1722,0.0000,0.9851
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 95.2154, 37.6552, -15.2204
MEAS/POINT, F(MP-12), 1
  GOTO/CART, 95.2154,37.6552,15.4960
  PTMEAS/CART, 94.8864,37.6552,-17.6946,0.1318,0.0000,0.9913
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 88.5326, 42.2203, -13.5978
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 81.6293, 43.4803, -10.1505
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 75.7161, 44.9417, -5.1548
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 76.6468, 57.7553, -6.1136
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 83.1985, 59.3362, -11.1206
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 87.3958, 55.3517, -13.1661
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 93.8758, 52.0796, -15.0137
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 95.2901, 65.9262, -15.2302
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 88.4026, 68.4281, -13.5509
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 82.8601, 69.1756, -10.9217
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 75.1830, 70.2617, -4.5683
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 75.9992, 85.0468, -5.4549
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 84.5132, 82.0401, -11.8428
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 90.8305, 78.0460, -14.3265
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 95.6678, 77.2557, -15.2773
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 95.8836, 91.2427, -15.3022
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 88.6379, 91.8358, -13.6353
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 81.2173, 93.5921, -9.8747
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 75.7074, 93.6392, -5.1455
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 79.3685, 77.6155, -8.5193
F(PATERN2)=FEAT/PATERN,F(MP-1),F(MP-2),F(MP-3),F(MP-4),F(MP-5),F(MP-6),F(MP-7),F(MP-8),F(MP-9),F(MP-10),F(MP-11),F(MP-12),F(MP-13),F(MP-14),F(MP-15),F(MP-16),F(MP-17),F(MP-18),F(MP-19),F(MP-20),F(MP-21),F(MP-22),F(MP-23),F(MP-24),F(MP-25),F(MP-26),F(MP-27),F(MP-28),F(MP-29),F(MP-30),F(MP-31),$
F(PATERN3)=FEAT/PATERN,F(SV-1),F(SV-2),F(SV-3),F(SV-4),F(SV-5),F(SV-6),F(SV-7),F(SV-8),F(SV-9),F(SV-10),F(SV-11),F(SV-12)
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 101.4960, 28.3184, -19.2272
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 101.4960, 36.6186, -19.5379
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 101.4960, 43.8436, -19.1218
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 101.4960, 54.2965, -19.0904
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 101.4960, 67.1249, -19.3543
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 101.4960, 81.0135, -19.5329
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 101.4960, 89.8273, -19.6440
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 101.4960, 95.2613, -19.4153
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 94.5513, 101.4960, -18.9401
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 88.1580, 101.4960, -17.7007
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 82.9898, 101.4960, -15.7072
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 77.0709, 101.4960, -11.9594
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 72.5374, 101.4960, -7.0668
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 68.0147, 96.4462, -4.2132
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 66.4457, 93.4960, -1.7250
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 64.4179, 94.3384, -1.1817
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 60.1367, 101.4960, -1.1681
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 45.9188, 101.4960, -0.9400
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 33.4516, 101.4960, -1.0444
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 22.8343, 101.4960, -1.0434
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 18.5807, 98.4417, -1.1025
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 12.1987, 87.4184, -1.2718
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 7.2636, 78.8939, -1.9020
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 1.6151, 69.1374, -1.7067
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, -2.4960, 57.6603, -2.2363
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, -2.4960, 44.3224, -2.2286
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, -2.4960, 32.1105, -1.9497
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, -2.4960, 12.1970, -2.1321
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, -2.4960, 3.1422, -2.3002
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 3.3234, -2.4960, -2.3772
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 13.5051, -2.4960, -2.4410
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 28.3048, -2.4960, -2.5145
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 40.9646, -2.4960, -1.8071
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 50.4280, -2.4960, -2.5530
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 63.4137, -2.4960, -2.5285
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 69.2799, 2.8310, -2.1534
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 71.7255, 5.0120, -5.9620
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 75.7889, 5.5040, -11.1699
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 84.5132, 6.4682, -15.4054
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 90.9783, 12.6195, -17.4990
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 92.8716, 19.1305, -17.9405
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 96.0182, 21.6861, -18.9111
F(PLN2)=FEAT/PLANE,CART,99.0000,79.4080,-23.9982,1.0000,-0.0000,0.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 96.8474, 12.3363, 15.5009
MEAS/PLANE, F(PLN2), 8
  GOTO/CART,    96.8474, 12.3363,  15.5009
  GOTO/CART,   101.4943, 30.4129,  15.5013
  PTMEAS/CART,  99.0000, 30.4132, -19.2638, 1.0000, -0.0000, 0.0000
  PTMEAS/CART,  99.0000, 30.1987, -22.5244, 1.0000, -0.0000, 0.0000
  PTMEAS/CART,  99.0000, 53.4650, -21.7398, 1.0000, -0.0000, 0.0000
  PTMEAS/CART,  99.0000, 59.7374, -19.3526, 1.0000, -0.0000, 0.0000
  PTMEAS/CART,  99.0000, 77.4494, -22.3589, 1.0000, -0.0000, 0.0000
  PTMEAS/CART,  99.0000, 85.7794, -19.7203, 1.0000, -0.0000, 0.0000
  PTMEAS/CART,  99.0000, 91.8524, -22.6282, 1.0000, -0.0000, 0.0000
  PTMEAS/CART,  99.0000, 93.5357, -19.5733, 1.0000, -0.0000, 0.0000
ENDMES
GOTO/101.5000, 93.5296, 30.4279
GOTO/31.5000, 31.5000, 30.0000
F(LN2)=FEAT/LINE,BND,CART,-0.0000,61.3660,-3.0000,21.7880,99.0000,-3.0000,-0.8653,0.5012,-0.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, -1.1587, 64.3477, 15.4965
MEAS/LINE,F(LN2),8,CLRSRF,FA(基准-A),15.0000,CLRSRF,FA(基准-A),30.0000
  GOTO/CART,   -1.1587, 64.3477, 15.4965
  PTMEAS/CART,  1.0021, 63.0969, -3.0000, -0.8653, 0.5012, -0.0000
  PTMEAS/CART,  3.8283, 67.9786, -3.0000, -0.8653, 0.5012, -0.0000
  PTMEAS/CART,  6.6546, 72.8604, -3.0000, -0.8653, 0.5012, -0.0000
  PTMEAS/CART,  9.4809, 77.7421, -3.0000, -0.8653, 0.5012, -0.0000
  PTMEAS/CART, 12.3071, 82.6239, -3.0000, -0.8653, 0.5012, -0.0000
  PTMEAS/CART, 15.1334, 87.5056, -3.0000, -0.8653, 0.5012, -0.0000
  PTMEAS/CART, 17.9597, 92.3874, -3.0000, -0.8653, 0.5012, -0.0000
  PTMEAS/CART, 20.7859, 97.2691, -3.0000, -0.8653, 0.5012, -0.0000
ENDMES
SNSLCT/S(L20-D1.0_A90_B0)
F(PLN3)=FEAT/PLANE,CART,62.9697,99.0000,-15.0000,-0.0000,1.0000,-0.0000
SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 10.0000
SNSET/CLRSRF, F(PLN3), 15.0000
F(Φ6.8FL)=FEAT/CIRCLE,INNER,CART,43.5000,96.0000,-15.0000,-0.0000,1.0000,-0.0000, 6.8000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 15.7671, 114.4961, 157.4628
MEAS/CIRCLE, F(Φ6.8FL), 5
  GOTO/CART,   15.7671, 114.4961, 157.4628
  GOTO/CART,   43.3565, 114.4961, -14.1075
  GOTO/CART,   43.3565, 111.0000, -14.1075
  PTMEAS/CART, 42.9602,  96.0000, -11.6431,  0.1588, -0.0000, -0.9873
  PTMEAS/CART, 40.1406,  96.0000, -14.4761,  0.9881,  0.0000, -0.1541
  PTMEAS/CART, 41.9636,  96.0000, -18.0331,  0.4519, -0.0000,  0.8921
  PTMEAS/CART, 45.9099,  96.0000, -17.3985, -0.7088,  0.0000,  0.7054
  PTMEAS/CART, 46.5258,  96.0000, -13.4493, -0.8899,  0.0000, -0.4561
  GOTO/CART,   44.3044, 111.0000, -14.5877
ENDMES
TEXT/OUTFIL, 'Φ5.8对称度：'
DECL/COMMON,DOUBLE,V_TCOR9
V_TCOR9 = VALUE/TA(TCOR9),ACT
F(ELL1)=FEAT/ELLIPS,INNER,CART,29.5000,96.0000,-6.9377,29.5000,96.0000,-23.0623,MAJOR,0.0000,1.0000,0.0000, 18.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 44.3082, 114.4961, -14.5864
MEAS/ELLIPS, F(ELL1), 9
  GOTO/CART,   44.3082, 114.4961, -14.5864
  GOTO/CART,   29.5000, 114.4961,  -8.4961
  PTMEAS/CART, 29.5000,  96.0000,  -6.0000,  0.0000,  0.0000, -1.0000
  PTMEAS/CART, 32.5696,  96.0000,  -9.2294, -0.9375,  0.0000, -0.3481
  PTMEAS/CART, 33.4668,  96.0000, -13.8430, -0.9983,  0.0000, -0.0575
  PTMEAS/CART, 33.1777,  96.0000, -18.5395, -0.9824,  0.0000,  0.1868
  PTMEAS/CART, 31.4355,  96.0000, -22.8763, -0.7794,  0.0000,  0.6265
  PTMEAS/CART, 27.5108,  96.0000, -22.8082,  0.7903, -0.0000,  0.6128
  PTMEAS/CART, 25.8053,  96.0000, -18.4487,  0.9834, -0.0000,  0.1813
  PTMEAS/CART, 25.5373,  96.0000, -13.7741,  0.9981, -0.0000, -0.0610
  PTMEAS/CART, 26.4750,  96.0000,  -9.1115,  0.9334, -0.0000, -0.3589
ENDMES
F(GCV1)=FEAT/GCURVE,CART,76.0972,96.0000,-15.5413,0.0000,1.0000,0.0000,1.0000,-0.0000,0.0003
MEAS/GCURVE, F(GCV1), 12
  PTMEAS/CART, 83.4921, 96.0000, -25.3906, -0.6502, 0.0000, -0.7598
  PTMEAS/CART, 81.8130, 96.0000, -23.8692, -0.6922, 0.0000, -0.7217
  PTMEAS/CART, 80.2227, 96.0000, -22.2550, -0.7319, 0.0000, -0.6814
  PTMEAS/CART, 78.7263, 96.0000, -20.5535, -0.7693, 0.0000, -0.6388
  PTMEAS/CART, 77.3287, 96.0000, -18.7699, -0.8043, 0.0000, -0.5942
  PTMEAS/CART, 76.0343, 96.0000, -16.9100, -0.8366, 0.0000, -0.5478
  PTMEAS/CART, 74.8474, 96.0000, -14.9799, -0.8663, 0.0000, -0.4995
  PTMEAS/CART, 73.7716, 96.0000, -12.9856, -0.8932, 0.0000, -0.4496
  PTMEAS/CART, 72.8105, 96.0000, -10.9336, -0.9172, 0.0000, -0.3983
  PTMEAS/CART, 71.9671, 96.0000, -8.8304, -0.9383, 0.0000, -0.3458
  PTMEAS/CART, 71.2442, 96.0000, -6.6829, -0.9564, 0.0000, -0.2921
  PTMEAS/CART, 70.6440, 96.0000, -4.4979, -0.9714, 0.0000, -0.2374
ENDMES
TEXT/OUTFIL, '仅形状：'
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 81.8692, 96.0000, -27.2871
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 80.0852, 96.0000, -25.6706
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 78.3957, 96.0000, -23.9558
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 76.8060, 96.0000, -22.1481
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 75.3211, 96.0000, -20.2532
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 73.9460, 96.0000, -18.2773
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 72.6850, 96.0000, -16.2266
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 71.5421, 96.0000, -14.1079
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 70.5210, 96.0000, -11.9279
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 69.6250, 96.0000, -9.6935
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 68.8569, 96.0000, -7.4120
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 68.2193, 96.0000, -5.0906
F(GCV2)=FEAT/GCURVE,CART,64.0568,97.0000,-9.4570,0.0000,-1.0000,0.0000,1.0000,0.0000,0.0003
MEAS/GCURVE, F(GCV2), 12
  PTMEAS/CART, 66.9797, 97.0000, -17.2717, 0.8858, 0.0000, 0.4640
  PTMEAS/CART, 66.2947, 97.0000, -15.9117, 0.9001, 0.0000, 0.4357
  PTMEAS/CART, 65.6531, 97.0000, -14.5307, 0.9135, 0.0000, 0.4069
  PTMEAS/CART, 65.0556, 97.0000, -13.1301, 0.9259, 0.0000, 0.3777
  PTMEAS/CART, 64.5029, 97.0000, -11.7112, 0.9374, 0.0000, 0.3481
  PTMEAS/CART, 63.9955, 97.0000, -10.2755, 0.9480, 0.0000, 0.3182
  PTMEAS/CART, 63.5338, 97.0000, -8.8244, 0.9576, 0.0000, 0.2880
  PTMEAS/CART, 63.1185, 97.0000, -7.3594, 0.9663, 0.0000, 0.2575
  PTMEAS/CART, 62.7498, 97.0000, -5.8819, 0.9740, 0.0000, 0.2267
  PTMEAS/CART, 62.4281, 97.0000, -4.3935, 0.9807, 0.0000, 0.1957
  PTMEAS/CART, 62.1538, 97.0000, -2.8957, 0.9864, 0.0000, 0.1645
  PTMEAS/CART, 61.9272, 97.0000, -1.3899, 0.9911, 0.0000, 0.1331
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 69.1909, 97.0000, -16.1135
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 68.5414, 97.0000, -14.8243
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 67.9332, 97.0000, -13.5151
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 67.3668, 97.0000, -12.1873
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 66.8428, 97.0000, -10.8422
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 66.3618, 97.0000, -9.4811
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 65.9242, 97.0000, -8.1055
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 65.5304, 97.0000, -6.7166
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 65.1809, 97.0000, -5.3160
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 64.8759, 97.0000, -3.9050
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 64.6159, 97.0000, -2.4851
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 64.4011, 97.0000, -1.0576
F(PATERN4)=FEAT/PATERN,F(SV-13),F(SV-14),F(SV-15),F(SV-16),F(SV-17),F(SV-18),F(SV-19),F(SV-20),F(SV-21),F(SV-22),F(SV-23),F(SV-24)
F(PLN3)=FEAT/PLANE,CART,62.9697,99.0000,-15.0000,-0.0000,1.0000,-0.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 92.8562, 114.4961, -19.7088
MEAS/PLANE,F(PLN3),16,CLRSRF,F(PLN3),15.0000,CLRSRF,FA(基准-A),80.0000
  GOTO/CART,   92.8562, 114.4961, -19.7088
  PTMEAS/CART, 92.8562,  99.0000, -19.7088, -0.0000, 1.0000, -0.0000
  PTMEAS/CART, 93.4140,  99.0000, -28.2868, -0.0000, 1.0000, -0.0000
  PTMEAS/CART, 83.9879,  99.0000, -21.4803, -0.0000, 1.0000, -0.0000
  PTMEAS/CART, 73.6258,  99.0000,  -9.2001, -0.0000, 1.0000, -0.0000
  PTMEAS/CART, 58.7117,  99.0000,  -3.2730, -0.0000, 1.0000, -0.0000
  PTMEAS/CART, 60.3152,  99.0000, -13.0537, -0.0000, 1.0000, -0.0000
  PTMEAS/CART, 70.1781,  99.0000, -26.8336, -0.0000, 1.0000, -0.0000
  PTMEAS/CART, 57.6636,  99.0000, -26.6656, -0.0000, 1.0000, -0.0000
  PTMEAS/CART, 52.7888,  99.0000, -18.5546, -0.0000, 1.0000, -0.0000
  PTMEAS/CART, 47.1289,  99.0000,  -5.9701, -0.0000, 1.0000, -0.0000
  PTMEAS/CART, 35.8304,  99.0000,  -1.9757, -0.0000, 1.0000, -0.0000
  PTMEAS/CART, 38.4516,  99.0000, -18.6907, -0.0000, 1.0000, -0.0000
  PTMEAS/CART, 39.6391,  99.0000, -27.6998, -0.0000, 1.0000, -0.0000
  PTMEAS/CART, 28.6679,  99.0000, -27.0995, -0.0000, 1.0000, -0.0000
  PTMEAS/CART, 23.6638,  99.0000, -15.2752, -0.0000, 1.0000, -0.0000
  PTMEAS/CART, 26.8645,  99.0000,  -2.1161, -0.0000, 1.0000, -0.0000
ENDMES
SNSLCT/S(L20-D1.0_A90_B90)
F(基准-E)=FEAT/PLANE,CART,0.0000,46.5245,-5.0000,-1.0000,0.0000,0.0000
SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 10.0000
SNSET/CLRSRF, F(基准-E), 15.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -15.4966, 225.8984, 80.4089
MEAS/PLANE, F(基准-E), 8
  GOTO/CART,   -15.4966, 225.8984,  80.4089
  GOTO/CART,   -15.4966,  58.2031,  -5.1466
  PTMEAS/CART,   0.0000,  58.2031,  -5.1466, -1.0000, 0.0000, 0.0000
  PTMEAS/CART,   0.0000,  55.3735, -26.3718, -1.0000, 0.0000, 0.0000
  PTMEAS/CART,   0.0000,  34.1560, -25.4902, -1.0000, 0.0000, 0.0000
  PTMEAS/CART,   0.0000,  35.3895,  -4.7984, -1.0000, 0.0000, 0.0000
  PTMEAS/CART,  -0.0153,  16.0090,  -4.0000, -1.0000, 0.0000, 0.0000
  PTMEAS/CART,   0.0000,  14.8440, -25.0117, -1.0000, 0.0000, 0.0000
  PTMEAS/CART,   0.0000,   5.3119, -24.5731, -1.0000, 0.0000, 0.0000
  PTMEAS/CART,   0.0000,   5.1313,  -5.9444, -1.0000, 0.0000, 0.0000
ENDMES
F(LN3)=FEAT/LINE,BND,CART,2.0000,0.0158,-10.0000,2.0000,60.0000,-10.0000,-0.0000,-0.0000,-1.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -15.4966, 5.1255, -5.9432
MEAS/LINE, F(LN3), 8
  GOTO/CART,   -15.4966,  5.1255,  -5.9432
  GOTO/CART,   -15.4966,  2.0158, -12.4966
  PTMEAS/CART,   2.0000,  2.0158, -10.0000, 0.0000, 0.0000, -1.0000
  PTMEAS/CART,   2.0000, 10.0136, -10.0000, 0.0000, 0.0000, -1.0000
  PTMEAS/CART,   2.0000, 18.0113, -10.0000, 0.0000, 0.0000, -1.0000
  PTMEAS/CART,   2.0000, 26.0090, -10.0000, 0.0000, 0.0000, -1.0000
  PTMEAS/CART,   2.0000, 34.0068, -10.0000, 0.0000, 0.0000, -1.0000
  PTMEAS/CART,   2.0000, 42.0045, -10.0000, 0.0000, 0.0000, -1.0000
  PTMEAS/CART,   2.0000, 50.0023, -10.0000, 0.0000, 0.0000, -1.0000
  PTMEAS/CART,   2.0000, 58.0000, -10.0000, 0.0000, 0.0000, -1.0000
ENDMES
GOTO/-7.9834, 7.9807, -12.4928
F(LN4)=FEAT/LINE,BND,CART,2.0000,2.0000,-20.0000,2.0000,60.0000,-20.0000,0.0000,0.0000,1.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -15.4966, 7.9738, -12.4915
MEAS/LINE, F(LN4), 8
  GOTO/CART,   -15.4966,  7.9738, -12.4915
  GOTO/CART,   -15.4966,  4.0000, -17.5034
  PTMEAS/CART,   2.0000,  4.0000, -20.0000, 0.0000, -0.0000, 1.0000
  PTMEAS/CART,   2.0000, 11.7143, -20.0000, 0.0000, -0.0000, 1.0000
  PTMEAS/CART,   2.0000, 19.4286, -20.0000, 0.0000, -0.0000, 1.0000
  PTMEAS/CART,   2.0000, 27.1429, -20.0000, 0.0000, -0.0000, 1.0000
  PTMEAS/CART,   2.0000, 34.8571, -20.0000, 0.0000, -0.0000, 1.0000
  PTMEAS/CART,   2.0000, 42.5714, -20.0000, 0.0000, -0.0000, 1.0000
  PTMEAS/CART,   2.0000, 50.2857, -20.0000, 0.0000, -0.0000, 1.0000
  PTMEAS/CART,   2.0000, 58.0000, -20.0000, 0.0000, -0.0000, 1.0000
ENDMES
F(LN_MID1)=FEAT/LINE,BND,CART,2.0000,1.0079,-15.0000,2.0000,59.0079,-15.0000,-0.0003,-0.0004,1.0000
CONST/LINE, F(LN_MID1), MIDLI, FA(LN3), FA(LN4), PTLN
TEXT/OUTFIL, '槽宽为10对称度：'
DECL/COMMON,DOUBLE,V_TCOR10
V_TCOR10 = VALUE/TA(TCOR10),ACT
GOTO/-7.9952, 57.9937, -17.5023
GOTO/-7.9898, 57.9874, 112.4990
SNSLCT/S(L20-D1.0_A90_B180)
F(基准-F)=FEAT/PLANE,CART,50.0001,0.0000,-14.9997,0.0000,-1.0000,0.0000
SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 10.0000
SNSET/CLRSRF, F(基准-F), 15.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, -132.4662, -15.4964, 112.2967
MEAS/PLANE, F(基准-F), 6
  GOTO/CART,   -132.4662, -15.4964, 112.2967
  GOTO/CART,      5.9748, -15.4964,  -6.4090
  PTMEAS/CART,    5.9748,   0.0000,  -6.4090, 0.0000, -1.0000, 0.0000
  PTMEAS/CART,    7.1518,   0.0000, -26.9212, 0.0000, -1.0000, 0.0000
  PTMEAS/CART,   26.4912,   0.0000, -26.6987, 0.0000, -1.0000, 0.0000
  PTMEAS/CART,   33.8508,   0.0000,  -5.0538, 0.0000, -1.0000, 0.0000
  PTMEAS/CART,   60.1903,   0.0000,  -6.2005, 0.0000, -1.0000, 0.0000
  PTMEAS/CART,   59.1376,   0.0000, -27.3428, 0.0000, -1.0000, 0.0000
ENDMES
TEXT/OUTFIL, '前图纸标注为99公差评价：'
TEXT/OUTFIL, '左图纸标注为99公差评价：'
F(B-Φ8)=FEAT/CIRCLE,OUTER,CART,21.5000,3.0000,-15.0000,0.0000,-1.0000,0.0000, 8.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 59.1429, -15.4964, -27.3413
MEAS/CIRCLE, F(B-Φ8), 5
  GOTO/CART,   59.1429, -15.4964, -27.3413
  GOTO/CART,   27.6730, -15.4964, -17.0242
  GOTO/CART,   27.6730, -12.0000, -17.0242
  PTMEAS/CART, 25.3009,   3.0000, -16.2464,  0.9502, -0.0000, -0.3116
  GOTO/CART,   26.7454,   3.0000, -18.8327
  GOTO/CART,   25.3043,   3.0000, -20.2660
  GOTO/CART,   23.4908,   3.0000, -21.1839
  PTMEAS/CART, 21.4892,   3.0000, -19.0000, -0.0027,  0.0000, -1.0000
  GOTO/CART,   19.4758,   3.0000, -21.1730
  GOTO/CART,   17.6673,   3.0000, -20.2454
  GOTO/CART,   16.2340,   3.0000, -18.8043
  PTMEAS/CART, 17.6924,   3.0000, -16.2258, -0.9519,  0.0000, -0.3064
  GOTO/CART,   15.0036,   3.0000, -14.9824
  GOTO/CART,   15.3270,   3.0000, -12.9758
  GOTO/CART,   16.2546,   3.0000, -11.1673
  PTMEAS/CART, 19.1576,   3.0000, -11.7576, -0.5856,  0.0000,  0.8106
  GOTO/CART,   19.5092,   3.0000,  -8.8161
  GOTO/CART,   21.5176,   3.0000,  -8.5036
  GOTO/CART,   23.5242,   3.0000,  -8.8270
  PTMEAS/CART, 23.8599,   3.0000, -11.7703,  0.5900, -0.0000,  0.8074
  GOTO/CART,   25.3327, -12.0000,  -9.7546
ENDMES
F(CIR1)=FEAT/CIRCLE,INNER,CART,21.5000,3.0000,-15.0000,0.0000,-1.0000,0.0000, 20.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 25.3377, -15.4964, -9.7536
MEAS/CIRCLE, F(CIR1), 5
  GOTO/CART,   25.3377, -15.4964,  -9.7536
  GOTO/CART,   13.9964, -15.4964, -15.0000
  GOTO/CART,   13.9964, -12.0000, -15.0000
  PTMEAS/CART, 11.5000,   3.0000, -15.0000,  1.0000, -0.0000,  0.0000
  GOTO/CART,   14.3637,   3.0000, -12.6813
  GOTO/CART,   15.4295,   3.0000, -10.5895
  GOTO/CART,   17.0895,   3.0000,  -8.9295
  PTMEAS/CART, 18.4098,   3.0000,  -5.4894,  0.3090, -0.0000, -0.9511
  GOTO/CART,   21.5000,   3.0000,  -7.4964
  GOTO/CART,   23.8187,   3.0000,  -7.8637
  GOTO/CART,   25.9105,   3.0000,  -8.9295
  PTMEAS/CART, 29.5902,   3.0000,  -9.1221, -0.8090,  0.0000, -0.5878
  GOTO/CART,   28.6363,   3.0000, -12.6813
  GOTO/CART,   29.0036,   3.0000, -15.0000
  GOTO/CART,   28.6363,   3.0000, -17.3187
  PTMEAS/CART, 29.5902,   3.0000, -20.8779, -0.8090,  0.0000,  0.5878
  GOTO/CART,   25.9105,   3.0000, -21.0705
  GOTO/CART,   23.8187,   3.0000, -22.1363
  GOTO/CART,   21.5000,   3.0000, -22.5036
  PTMEAS/CART, 18.4098,   3.0000, -24.5106,  0.3090,  0.0000,  0.9511
  GOTO/CART,   19.1813, -12.0000, -22.1363
ENDMES
F(C-Φ8)=FEAT/CIRCLE,OUTER,CART,45.5000,3.0000,-15.0000,0.0000,-1.0000,0.0000, 8.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 19.1862, -15.4964, -22.1350
MEAS/CIRCLE, F(C-Φ8), 5
  GOTO/CART,   19.1862, -15.4964, -22.1350
  GOTO/CART,   39.0036, -15.4964, -15.0000
  GOTO/CART,   39.0036, -12.0000, -15.0000
  PTMEAS/CART, 41.5000,   3.0000, -15.0000, -1.0000,  0.0000,  0.0000
  GOTO/CART,   39.3215,   3.0000, -12.9925
  GOTO/CART,   40.2443,   3.0000, -11.1815
  GOTO/CART,   41.6815,   3.0000,  -9.7443
  PTMEAS/CART, 44.2639,   3.0000, -11.1958, -0.3090,  0.0000,  0.9511
  GOTO/CART,   45.5000,   3.0000,  -8.5036
  GOTO/CART,   47.5075,   3.0000,  -8.8215
  GOTO/CART,   49.3185,   3.0000,  -9.7443
  PTMEAS/CART, 48.7361,   3.0000, -12.6489,  0.8090, -0.0000,  0.5878
  GOTO/CART,   51.6785,   3.0000, -12.9925
  GOTO/CART,   51.9964,   3.0000, -15.0000
  GOTO/CART,   51.6785,   3.0000, -17.0075
  PTMEAS/CART, 48.7361,   3.0000, -17.3511,  0.8090, -0.0000, -0.5878
  GOTO/CART,   49.3185,   3.0000, -20.2557
  GOTO/CART,   47.5075,   3.0000, -21.1785
  GOTO/CART,   45.5000,   3.0000, -21.4964
  PTMEAS/CART, 44.2639,   3.0000, -18.8042, -0.3090, -0.0000, -0.9511
  GOTO/CART,   43.4925, -12.0000, -21.1785
ENDMES
F(CIR2)=FEAT/CIRCLE,INNER,CART,45.5000,3.0000,-15.0000,0.0000,-1.0000,0.0000, 20.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 43.4974, -15.4964, -21.1772
MEAS/CIRCLE, F(CIR2), 5
  GOTO/CART,   43.4974, -15.4964, -21.1772
  GOTO/CART,   37.9964, -15.4964, -15.0000
  GOTO/CART,   37.9964, -12.0000, -15.0000
  PTMEAS/CART, 35.5000,   3.0000, -15.0000,  1.0000, -0.0000,  0.0000
  GOTO/CART,   38.3637,   3.0000, -12.6813
  GOTO/CART,   39.4295,   3.0000, -10.5895
  GOTO/CART,   41.0895,   3.0000,  -8.9295
  PTMEAS/CART, 42.4098,   3.0000,  -5.4894,  0.3090, -0.0000, -0.9511
  GOTO/CART,   45.5000,   3.0000,  -7.4964
  GOTO/CART,   47.8187,   3.0000,  -7.8637
  GOTO/CART,   49.9105,   3.0000,  -8.9295
  PTMEAS/CART, 53.5902,   3.0000,  -9.1221, -0.8090,  0.0000, -0.5878
  GOTO/CART,   52.6363,   3.0000, -12.6813
  GOTO/CART,   53.0036,   3.0000, -15.0000
  GOTO/CART,   52.6363,   3.0000, -17.3187
  PTMEAS/CART, 53.5902,   3.0000, -20.8779, -0.8090,  0.0000,  0.5878
  GOTO/CART,   49.9105,   3.0000, -21.0705
  GOTO/CART,   47.8187,   3.0000, -22.1363
  GOTO/CART,   45.5000,   3.0000, -22.5036
  PTMEAS/CART, 42.4098,   3.0000, -24.5106,  0.3090,  0.0000,  0.9511
  GOTO/CART,   43.1813, -12.0000, -22.1363
ENDMES
F(C-CYL2)=FEAT/CYLNDR,OUTER,CART,45.5000,4.0000,-15.0000,0.0000,-1.0000,0.0000, 8.0000,  8.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 51.9964, 5.0000, -15.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 47.5075, 2.0000, -21.1785
MEAS/CYLNDR, F(C-CYL2), 10
  PTMEAS/CART, 49.5000, 5.0000, -15.0000,  1.0000, -0.0086,   0.0003
  GOTO/ARC,    47.5075, 5.0000,  -8.8215, 50.7555,  4.9893, -11.1812
  PTMEAS/CART, 46.7361, 5.0000, -11.1958,  0.3090, -0.0000,   0.9511
  GOTO/ARC,    40.2443, 5.0000, -11.1815, 43.4925,  5.0000,  -8.8215
  PTMEAS/CART, 42.2639, 5.0000, -12.6489, -0.8090, -0.0000,   0.5878
  GOTO/ARC,    40.2443, 5.0000, -18.8185, 39.0036,  5.0000, -15.0000
  PTMEAS/CART, 42.2639, 5.0000, -17.3511, -0.8090, -0.0000,  -0.5878
  GOTO/ARC,    47.5075, 5.0000, -21.1785, 43.4925,  5.0000, -21.1785
  PTMEAS/CART, 46.7361, 5.0000, -18.8042,  0.3090, -0.0000,  -0.9511
  PTMEAS/CART, 46.7361, 2.0000, -18.8042,  0.3093, -0.0023,  -0.9510
  GOTO/ARC,    40.2443, 2.0000, -18.8185, 43.4928,  1.9972, -21.1786
  PTMEAS/CART, 42.2639, 2.0000, -17.3511, -0.8090, -0.0000,  -0.5878
  GOTO/ARC,    40.2443, 2.0000, -11.1815, 39.0036,  2.0000, -15.0000
  PTMEAS/CART, 42.2639, 2.0000, -12.6489, -0.8090, -0.0000,   0.5878
  GOTO/ARC,    47.5075, 2.0000,  -8.8215, 43.4925,  2.0000,  -8.8215
  PTMEAS/CART, 46.7361, 2.0000, -11.1958,  0.3090, -0.0000,   0.9511
  GOTO/ARC,    51.9964, 2.0000, -15.0000, 50.7557,  2.0000, -11.1815
  PTMEAS/CART, 49.5000, 2.0000, -15.0000,  1.0000, -0.0000,  -0.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 51.9964, 2.0000, -15.0000
F(B-CYL1)=FEAT/CYLNDR,OUTER,CART,21.5000,4.0000,-15.0000,0.0000,-1.0000,0.0000, 8.0000,  8.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 27.9964, 2.0000, -15.0000
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 23.5075, 5.0000, -21.1785
MEAS/CYLNDR, F(B-CYL1), 10
  PTMEAS/CART, 25.5000, 2.0000, -15.0000,  1.0000, -0.0086,   0.0003
  GOTO/ARC,    23.5075, 2.0000,  -8.8215, 26.7555,  1.9893, -11.1812
  PTMEAS/CART, 22.7361, 2.0000, -11.1958,  0.3090, -0.0000,   0.9511
  GOTO/ARC,    16.2443, 2.0000, -11.1815, 19.4925,  2.0000,  -8.8215
  PTMEAS/CART, 18.2639, 2.0000, -12.6489, -0.8090, -0.0000,   0.5878
  GOTO/ARC,    16.2443, 2.0000, -18.8185, 15.0036,  2.0000, -15.0000
  PTMEAS/CART, 18.2639, 2.0000, -17.3511, -0.8090, -0.0000,  -0.5878
  GOTO/ARC,    23.5075, 2.0000, -21.1785, 19.4925,  2.0000, -21.1785
  PTMEAS/CART, 22.7361, 2.0000, -18.8042,  0.3090, -0.0000,  -0.9511
  PTMEAS/CART, 22.7361, 5.0000, -18.8042,  0.3093, -0.0023,  -0.9510
  GOTO/ARC,    16.2443, 5.0000, -18.8185, 19.4928,  4.9972, -21.1786
  PTMEAS/CART, 18.2639, 5.0000, -17.3511, -0.8090, -0.0000,  -0.5878
  GOTO/ARC,    16.2443, 5.0000, -11.1815, 15.0036,  5.0000, -15.0000
  PTMEAS/CART, 18.2639, 5.0000, -12.6489, -0.8090, -0.0000,   0.5878
  GOTO/ARC,    23.5075, 5.0000,  -8.8215, 19.4925,  5.0000,  -8.8215
  PTMEAS/CART, 22.7361, 5.0000, -11.1958,  0.3090, -0.0000,   0.9511
  GOTO/ARC,    27.9964, 5.0000, -15.0000, 26.7557,  5.0000, -11.1815
  PTMEAS/CART, 25.5000, 5.0000, -15.0000,  1.0000, -0.0000,  -0.0000
ENDMES
$$ CALL/M(EASI_CLEARPLN_GOTO), 0, 27.9964, 5.0000, -15.0000
TEXT/OUTFIL, 'B基准孔对称度：'
DECL/COMMON,DOUBLE,V_TCOR12
V_TCOR12 = VALUE/TA(TCOR12),ACT
DECL/COMMON,DOUBLE,V_TCOR13
V_TCOR13 = VALUE/TA(TCOR13),ACT
TEXT/OUTFIL, 'C基准孔对称度：'
DECL/COMMON,DOUBLE,V_TCOR13
V_TCOR13 = VALUE/TA(TCOR13),ACT
GOTO/28.0010, -15.0080, -14.9976
GOTO/28.0059, -15.0149, 235.0037

SNSLCT/S(L20-D1.0)
SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 10.0000
SNSET/CLRSRF, FA(基准-A), 15.0000
$$ Measurement points are created through nominal points
$$ CALL/M(EASI_CLEARPLN_GOTO), 1, 74.5278, 14.8137, 15.4960
F(GCV3)=FEAT/GCURVE,CART,84.1302,50.0000,-13.3017,0.0000,1.0000,0.0000,-1.0000,0.0000,-0.0003
MEAS/GCURVE, F(GCV3), 12
  PTMEAS/CART, 73.1265, 50.0000, -6.0095, 0.7535, -0.0000, 0.6574
  PTMEAS/CART, 74.7959, 50.0000, -7.7933, 0.7058, -0.0000, 0.7084
  PTMEAS/CART, 76.5857, 50.0000, -9.4563, 0.6547, -0.0000, 0.7559
  PTMEAS/CART, 78.4872, 50.0000, -10.9904, 0.6004, -0.0000, 0.7997
  PTMEAS/CART, 80.4910, 50.0000, -12.3881, 0.5431, -0.0000, 0.8397
  PTMEAS/CART, 82.5875, 50.0000, -13.6426, 0.4832, -0.0000, 0.8755
  PTMEAS/CART, 84.7664, 50.0000, -14.7478, 0.4210, -0.0000, 0.9071
  PTMEAS/CART, 87.0171, 50.0000, -15.6983, 0.3567, -0.0000, 0.9342
  PTMEAS/CART, 89.3286, 50.0000, -16.4894, 0.2906, -0.0000, 0.9568
  PTMEAS/CART, 91.6897, 50.0000, -17.1174, 0.2232, -0.0000, 0.9748
  PTMEAS/CART, 94.0888, 50.0000, -17.5792, 0.1546, -0.0000, 0.9880
  PTMEAS/CART, 96.5143, 50.0000, -17.8724, 0.0853, -0.0000, 0.9964
ENDMES
TEXT/OUTFIL, '仅形状：'
OUTPUT/FA(GCV3)[1,12]
SNSET/APPRCH, 2.0000
SNSET/RETRCT, 2.0000
SNSET/DEPTH, 0.0000
SNSET/SEARCH, 10.0000
SNSET/CLRSRF, 15.0000
F(PATERN5)=FEAT/PATERN,F(SV-25),F(SV-26),F(SV-27),F(SV-28),F(SV-29),F(SV-30),F(SV-31),F(SV-32),F(SV-33),F(SV-34),F(SV-35),F(SV-36)
OUTPUT/FA(PATERN5)
GOTO/96.7323, 49.9931, 234.6160


$$ Set.ForeGround.GraphicalReport
 
T(TCOR1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1)=TOL/PROFP,-0.0300,0.0300
T(TCOR4)=TOL/CORTOL,XAXIS,-0.0200,0.0200
T(TCOR5)=TOL/CORTOL,YAXIS,-0.0200,0.0200
T(TDM1)=TOL/DIAM,0.0000,0.0210








T(TCOR1_点-1_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_点-1_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_点-1_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_点-1_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(点-1),TA(TCOR1_点-1_1),TA(TCOR2_点-1_1),TA(TCOR3_点-1_1),TA(TPFP1_点-1_1)
T(TCOR1_点-2_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_点-2_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_点-2_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_点-2_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(点-2),TA(TCOR1_点-2_1),TA(TCOR2_点-2_1),TA(TCOR3_点-2_1),TA(TPFP1_点-2_1)
T(TCOR1_点-3_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_点-3_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_点-3_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_点-3_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(点-3),TA(TCOR1_点-3_1),TA(TCOR2_点-3_1),TA(TCOR3_点-3_1),TA(TPFP1_点-3_1)
T(TCOR1_点-4_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_点-4_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_点-4_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_点-4_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(点-4),TA(TCOR1_点-4_1),TA(TCOR2_点-4_1),TA(TCOR3_点-4_1),TA(TPFP1_点-4_1)
T(TCOR1_点-5_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_点-5_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_点-5_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_点-5_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(点-5),TA(TCOR1_点-5_1),TA(TCOR2_点-5_1),TA(TCOR3_点-5_1),TA(TPFP1_点-5_1)
T(TCOR1_点-6_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_点-6_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_点-6_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_点-6_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(点-6),TA(TCOR1_点-6_1),TA(TCOR2_点-6_1),TA(TCOR3_点-6_1),TA(TPFP1_点-6_1)
T(TCOR1_点-7_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_点-7_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_点-7_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_点-7_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(点-7),TA(TCOR1_点-7_1),TA(TCOR2_点-7_1),TA(TCOR3_点-7_1),TA(TPFP1_点-7_1)
T(TCOR1_点-8_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_点-8_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_点-8_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_点-8_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(点-8),TA(TCOR1_点-8_1),TA(TCOR2_点-8_1),TA(TCOR3_点-8_1),TA(TPFP1_点-8_1)
T(TCOR1_点-9_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_点-9_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_点-9_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_点-9_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(点-9),TA(TCOR1_点-9_1),TA(TCOR2_点-9_1),TA(TCOR3_点-9_1),TA(TPFP1_点-9_1)
T(TCOR1_点-10_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_点-10_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_点-10_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_点-10_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(点-10),TA(TCOR1_点-10_1),TA(TCOR2_点-10_1),TA(TCOR3_点-10_1),TA(TPFP1_点-10_1)
T(TCOR1_点-11_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_点-11_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_点-11_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_点-11_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(点-11),TA(TCOR1_点-11_1),TA(TCOR2_点-11_1),TA(TCOR3_点-11_1),TA(TPFP1_点-11_1)
T(TCOR1_点-12_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_点-12_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_点-12_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_点-12_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(点-12),TA(TCOR1_点-12_1),TA(TCOR2_点-12_1),TA(TCOR3_点-12_1),TA(TPFP1_点-12_1)
T(TCOR1_MP-1_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_MP-1_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_MP-1_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_MP-1_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(MP-1),TA(TCOR1_MP-1_1),TA(TCOR2_MP-1_1),TA(TCOR3_MP-1_1),TA(TPFP1_MP-1_1)
T(TCOR1_MP-2_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_MP-2_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_MP-2_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_MP-2_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(MP-2),TA(TCOR1_MP-2_1),TA(TCOR2_MP-2_1),TA(TCOR3_MP-2_1),TA(TPFP1_MP-2_1)
T(TCOR1_MP-3_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_MP-3_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_MP-3_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_MP-3_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(MP-3),TA(TCOR1_MP-3_1),TA(TCOR2_MP-3_1),TA(TCOR3_MP-3_1),TA(TPFP1_MP-3_1)
T(TCOR1_MP-4_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_MP-4_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_MP-4_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_MP-4_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(MP-4),TA(TCOR1_MP-4_1),TA(TCOR2_MP-4_1),TA(TCOR3_MP-4_1),TA(TPFP1_MP-4_1)
T(TCOR1_MP-5_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_MP-5_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_MP-5_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_MP-5_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(MP-5),TA(TCOR1_MP-5_1),TA(TCOR2_MP-5_1),TA(TCOR3_MP-5_1),TA(TPFP1_MP-5_1)
T(TCOR1_MP-6_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_MP-6_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_MP-6_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_MP-6_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(MP-6),TA(TCOR1_MP-6_1),TA(TCOR2_MP-6_1),TA(TCOR3_MP-6_1),TA(TPFP1_MP-6_1)
T(TCOR1_MP-7_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_MP-7_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_MP-7_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_MP-7_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(MP-7),TA(TCOR1_MP-7_1),TA(TCOR2_MP-7_1),TA(TCOR3_MP-7_1),TA(TPFP1_MP-7_1)
T(TCOR1_MP-8_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_MP-8_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_MP-8_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_MP-8_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(MP-8),TA(TCOR1_MP-8_1),TA(TCOR2_MP-8_1),TA(TCOR3_MP-8_1),TA(TPFP1_MP-8_1)
T(TCOR1_MP-9_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_MP-9_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_MP-9_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_MP-9_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(MP-9),TA(TCOR1_MP-9_1),TA(TCOR2_MP-9_1),TA(TCOR3_MP-9_1),TA(TPFP1_MP-9_1)
T(TCOR1_MP-10_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_MP-10_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_MP-10_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_MP-10_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(MP-10),TA(TCOR1_MP-10_1),TA(TCOR2_MP-10_1),TA(TCOR3_MP-10_1),TA(TPFP1_MP-10_1)
T(TCOR1_MP-11_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_MP-11_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_MP-11_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_MP-11_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(MP-11),TA(TCOR1_MP-11_1),TA(TCOR2_MP-11_1),TA(TCOR3_MP-11_1),TA(TPFP1_MP-11_1)
T(TCOR1_MP-12_1)=TOL/CORTOL,XAXIS,-0.0300,0.0300
T(TCOR2_MP-12_1)=TOL/CORTOL,YAXIS,-0.0300,0.0300
T(TCOR3_MP-12_1)=TOL/CORTOL,ZAXIS,-0.0300,0.0300
T(TPFP1_MP-12_1)=TOL/PROFP,-0.0300,0.0300
OUTPUT/FA(MP-12),TA(TCOR1_MP-12_1),TA(TCOR2_MP-12_1),TA(TCOR3_MP-12_1),TA(TPFP1_MP-12_1)
T(TCOR4_Φ10-1_1)=TOL/CORTOL,XAXIS,-0.0200,0.0200
T(TCOR5_Φ10-1_1)=TOL/CORTOL,YAXIS,-0.0200,0.0200
T(TDM1_Φ10-1_1)=TOL/DIAM,0.0000,0.0210
OUTPUT/FA(Φ10-1),TA(TCOR4_Φ10-1_1),TA(TCOR5_Φ10-1_1),TA(TDM1_Φ10-1_1)
T(TCOR4_Φ10-2_1)=TOL/CORTOL,XAXIS,-0.0200,0.0200
T(TCOR5_Φ10-2_1)=TOL/CORTOL,YAXIS,-0.0200,0.0200
T(TDM1_Φ10-2_1)=TOL/DIAM,0.0000,0.0210
OUTPUT/FA(Φ10-2),TA(TCOR4_Φ10-2_1),TA(TCOR5_Φ10-2_1),TA(TDM1_Φ10-2_1)
T(TCOR4_Φ10-3_1)=TOL/CORTOL,XAXIS,-0.0200,0.0200
T(TCOR5_Φ10-3_1)=TOL/CORTOL,YAXIS,-0.0200,0.0200
T(TDM1_Φ10-3_1)=TOL/DIAM,0.0000,0.0210
OUTPUT/FA(Φ10-3),TA(TCOR4_Φ10-3_1),TA(TCOR5_Φ10-3_1),TA(TDM1_Φ10-3_1)
T(TCOR4_Φ10-4_1)=TOL/CORTOL,XAXIS,-0.0200,0.0200
T(TCOR5_Φ10-4_1)=TOL/CORTOL,YAXIS,-0.0200,0.0200
T(TDM1_Φ10-4_1)=TOL/DIAM,0.0000,0.0210
OUTPUT/FA(Φ10-4),TA(TCOR4_Φ10-4_1),TA(TCOR5_Φ10-4_1),TA(TDM1_Φ10-4_1)
T(TCOR4_Φ10-5_1)=TOL/CORTOL,XAXIS,-0.0200,0.0200
T(TCOR5_Φ10-5_1)=TOL/CORTOL,YAXIS,-0.0200,0.0200
T(TDM1_Φ10-5_1)=TOL/DIAM,0.0000,0.0210
OUTPUT/FA(Φ10-5),TA(TCOR4_Φ10-5_1),TA(TCOR5_Φ10-5_1),TA(TDM1_Φ10-5_1)
T(TCOR4_Φ10-6_1)=TOL/CORTOL,XAXIS,-0.0200,0.0200
T(TCOR5_Φ10-6_1)=TOL/CORTOL,YAXIS,-0.0200,0.0200
T(TDM1_Φ10-6_1)=TOL/DIAM,0.0000,0.0210
OUTPUT/FA(Φ10-6),TA(TCOR4_Φ10-6_1),TA(TCOR5_Φ10-6_1),TA(TDM1_Φ10-6_1)
T(TCOR4_Φ20_1)=TOL/CORTOL,XAXIS,-0.0200,0.0200
T(TCOR5_Φ20_1)=TOL/CORTOL,YAXIS,-0.0200,0.0200
T(TDM1_Φ20_1)=TOL/DIAM,0.0000,0.0210
OUTPUT/FA(Φ20),TA(TCOR4_Φ20_1),TA(TCOR5_Φ20_1),TA(TDM1_Φ20_1)
T(TCOR4_Φ10_1)=TOL/CORTOL,XAXIS,-0.0200,0.0200
T(TCOR5_Φ10_1)=TOL/CORTOL,YAXIS,-0.0200,0.0200
T(TDM1_Φ10_1)=TOL/DIAM,0.0000,0.0210
OUTPUT/FA(Φ10),TA(TCOR4_Φ10_1),TA(TCOR5_Φ10_1),TA(TDM1_Φ10_1)
T(TCOR4_Φ6.8_1)=TOL/CORTOL,XAXIS,-0.0200,0.0200
T(TCOR5_Φ6.8_1)=TOL/CORTOL,YAXIS,-0.0200,0.0200
T(TDM1_Φ6.8_1)=TOL/DIAM,0.0000,0.0210
OUTPUT/FA(Φ6.8),TA(TCOR4_Φ6.8_1),TA(TCOR5_Φ6.8_1),TA(TDM1_Φ6.8_1)
T(TCOR4_Φ36_1)=TOL/CORTOL,XAXIS,-0.0200,0.0200
T(TCOR5_Φ36_1)=TOL/CORTOL,YAXIS,-0.0200,0.0200
T(TDM1_Φ36_1)=TOL/DIAM,0.0000,0.0210
OUTPUT/FA(Φ36),TA(TCOR4_Φ36_1),TA(TCOR5_Φ36_1),TA(TDM1_Φ36_1)
T(TCOR4_Φ8_1)=TOL/CORTOL,XAXIS,-0.0200,0.0200
T(TCOR5_Φ8_1)=TOL/CORTOL,YAXIS,-0.0200,0.0200
T(TDM1_Φ8_1)=TOL/DIAM,0.0000,0.0210
OUTPUT/FA(Φ8),TA(TCOR4_Φ8_1),TA(TCOR5_Φ8_1),TA(TDM1_Φ8_1)
$$ Set.ViewGraphicalReport.Report1
$$ Set.SaveGraphicalReport.Report1
$$ Set.GraphReport.Reset
$$ Set.ViewGraphicalReport.Report2
$$ Set.SaveGraphicalReport.Report2
$$ Set.GraphReport.Reset
$$ Set.ViewGraphicalReport.Report3
$$ Set.SaveGraphicalReport.Report3
$$ Set.GraphReport.Reset


$$ Set.Save.PDF.GraphicalReport.File(E:\山涧果子-???.PDF).Landscape.All.Man
$$ Set.GraphReport.Reset
山涧果子
关注
  • 0
    点赞
  • 踩
  • 2
    收藏
    觉得还不错? 一键收藏
  • 打赏
    打赏
  • 0
    评论
专栏目录
RationalDMIS2020高级编程
山涧果子（JIanhongwei810）
11-15 629
Excel指定位置循环输出 DECL/COMMON, INTGR, KNPTN1 KNPTN1 = PROMPT/'请输入写入Excel页面Sheet表数' DECL/COMMON,INTGR,I,ED,ER ED = PROMPT/'请输入循环次数' DO/I,1,ED,1 ER = ASSIGN/I-1 TEXT/OPER, '是否继续' $$此处为精建坐标，测量语句，公差输出语句以及实数变量 DECL/COMMON, CHAR, 256, KNPTC1 KNPTC1=ASSIGN/.
RationalDMIS 2020输出EXCEL
山涧果子（JIanhongwei810）
01-20 1020
RationalDMIS支持多种输出格式，包括文本格式、PDF格式、HTML网页格式、EXCEL格式。 保存输出报告时，可以选择输出为HTML文件或者PDF文件： 在工具条上有"Excel输出”按钮，点击后进入Excel输出界面，拖放元素即可实现输出 如果需要更加灵活的Excel输出方式，可以点击“输出数据到Excel"图标 此功能提供灵活多变的用户自定义EXCEL输出方式，并且可以使用DMIS程序控制 ...
RationalDMIS 2020高级教程之变量写入EXCEL
山涧果子（JIanhongwei810）
12-24 664
传统的PDF报告在数据的统计和分析中非常不便，EXCEL表格可以帮助我们统计测量数据，制作过程控制图，在产品的生产过程中，过程控制不仅可以快速发现不良品，而且数据的分析结果可反作用于生产过程改善生产工艺，降低生产成本。 产品尺寸输出至“固定”的检测表里，需要通过DMIS语句定制输出。但对于没有语言类编程基础的用户来说，操作相对困难，让人望而却步，只能选择手动去填入EXCEL，这将耗费大量的时间，并且还容易抄写错误，给公司带来不必要的损失。 现在我们可以通过Rational强大的“拖拽”功能，无需人工去写语.
RationalDMIS2020 使用平移坐标系来批量测量零件并输出EXCEL
山涧果子（JIanhongwei810）
12-14 529
客户的零件固定在夹具上，每个夹具固定10个工件，每个工件的测量结果需要按列填入指定的Excel模板里，每个工件都有单独的基准。 一般的做法是阵列一下，然后计算各个公差或者输出元素，这样做的缺点是会产生大量元素，而且计算公差时要选取各自不同的基准，编程会变得比较繁琐，程序也会显得很“臃肿”。 这里介绍一种利用坐标系平移批量测量工件的方法，只需编写一个工件的测量程序再插入几条DMIS语句即可实现。 操作方法流程： A.修改数模坐标系，使工件的排列方向为X轴。原点位于数模尖角。 B.用面、线、点在夹具上建立粗定位
RationalDMIS 2020 各种输出形式实例
山涧果子（JIanhongwei810）
02-23 519
A 传统的输出报告： 要产生传统的文本形式的输出报告，只需鼠标点击拖动一个或多个数据（包括元素、公差等）到输出窗口即可。 注*：只需按住键盘“shift”或者“Ctrl”键并点击选取，就可以实现多选。 B 图文并茂的输出报告： 用户可以直接或间接地把“图形报告窗口”和“图形误差图窗口”的图形报告发送到“输出报告”，从而产生图形化的输出报告 ——输出图形报告：详情请查阅：创建图形化的输出报告篇章 图形报告实例： 图形报告例1 图形报告例2 ——输出图形误差报告：详情请查阅创建图形误差..
RationalDMIS 7.1 Excel模板制作 2020.pdf
03-25
RationalDMIS 7.1 Excel模板制作 2020
RationalDMIS 7.1 Excel模板制作 2020.pptx
10-18
RationalDMIS 7.1 Excel模板制作 2020.pptx
RationalDMIS 7.0 程序检测模板
04-09
RationalDMIS 7.0 程序检测模板
RationalDMIS 7.1 变量编辑Excel 2020 .pptx
10-18
RationalDMIS 7.1 变量编辑Excel 2020 .pptx
RationalDMIS 2020 SP25扫描测头构建与校验.pptx
10-16
RationalDMIS 2020 SP25扫描测头构建与校验
海克斯康 思锐 三坐标 pcdmis to excel
12-15
pc dmis 自动化 输出excel报告，海克斯康 思锐 OGP micro-vu 蔡司 基恩士 万豪 影像仪 三丰 卡尺 千分尺 千分表
RationalDMIS 2020 输出报告自动保存到外部指定目录下
山涧果子（JIanhongwei810）
01-07 503
示例：将输出结果保存为外部PDF文件，每次保存结果名称自动递增命名（不覆盖上一个输出）。 首先，我们需要定义一个外部设备：在设备定义节点使用鼠标右键弹出菜单“声明设备”： 在设备名称中，给设备一个ID，并且选择方式为“步长”： 选择“设备名”，在保存类型中选择为"PDF File（*.Pdf），文件名命名时注意在后面加上1个或者多个连续的"？"，例如下图命名为Sample？？？. 打开“自学习”，然后选择“打开存储设备”和“关闭存储设备”，以生成打开设备和关闭设备的自学习语句。 在程序数据区关闭“总
Excel导出失败的解决方案
热门推荐
qq_34765995的博客
03-26 1万+
我按照同事给的步骤配置excel导出功能(如下所示)。 由于导出Excel功能需要服务器安装Microsoft Office Excel应用程序，并配置Asp.Net用户权限，以下是配置的操作步骤： 1)、开始--〉运行--〉cmd； 2)、命令提示符下面，输入mmc -32,打开32的控制台； 3)、文件菜单中，添加删除管理单元--〉组件服务--〉添加到右侧，点击确定 4...
RationalDMIS 7.1 调用EASL_GET_T_V宏来将公差输出到CSV/EXCEL
山涧果子（JIanhongwei810）
08-19 298
RationalDMIS变量数据区内置一个EASL_GET_T_V宏，此宏的功能是将公差计算结果的实际值、理论值、公差带/上下公差、超差值取成变量存储在变量数据区； 操作过程如下： 双击GET_T_V 把下面语句粘贴到DMIS程序区 DECL/INTGR，TOL NUM TOLNUM= ASSIGN/1 DID（CSV）=DEVICE/STOR，‘C:\OUTPUT.CSV’ OPEN/DID（CSV），DIRECT，OUTPUT，APPEND $$ here insert macro cal CLOSE.
excel vb ppap_利用二次开发程序导出PCDMIS测量数据到Excel表格
weixin_39886612的博客
11-30 3692
【摘要】众所周知，PC-DMIS软件不但给我们带来强大的检测功能,还预留了二次开发接口pcdlrn.TLB,用户可根据自我需要编写合适的辅助小软件。本文主要讲述怎样利用PC-DMIS软件自带功能结合以Visual Basic语言编写的小软件“PC-DMIS_to_Form.exe”，把测量程序中的评价数据以Excel表格形式导出，并开源部分源码给有兴趣的朋友作参考。【关键词】VB, 二次...
RationalDMIS 2020 输出报告设置
山涧果子（JIanhongwei810）
02-04 708
输出窗口用来输出测量结果和各种属性，RationalDMIS支持传统文本格式的输出、图文并茂的输出、 用户自定制的输出、EXCEL表格形式输出、SPC统计图输出等。 输出窗口由两部分组成：输出主窗口和输出设置窗口。 RationalDMIS中输出的内容都显示在输出主窗口中,见下图: 输出主窗口包括输出工具条,自定义输出窗口和Excel输出窗口.通过输出工具条可以对输出内容窗口进行操作,可以打开输出设置窗口, 可以打印输出内容等. 随着输出内容窗口在自定义输出窗口和Excel输出窗口之间切换, 输出工具..
RationalDMIS 7.1调用EASI_GET_T_V宏来将公差输出到CSV/EXCEL
山涧果子（JIanhongwei810）
11-23 273
RationalDMIS变量数据区内置一个EASI_GET_T_V宏，此宏的功能是将公差计算结果的实际值、理论值、公差带/上下公差、超差值取成变量存储在变量数据区； 操作过程如下： 双击GET_T_V 在弹出窗口中输入如下代码确认，一共3行，第一行是一个回车键； 回车键 把下面语句粘贴到DMIS程序区； 把公差标签拖放到GET_T_V标签上，生成的语句插入到OPEN和CLOSE之间；完成；如希望输出EXCEL后缀，只要将文件输出路径的后缀名称改为xLS； 示例程序如下： 输出CSV/exc.
三坐标DMIS语言是C语言吗,三坐标测量软件 RationalDMIS如何实现相对测量
weixin_39568889的博客
05-23 459
在我们使用三坐标测量钣金件和冲压件的过程中，常常会遇到某一排孔位整体出现偏差，而导致测量程序无法自动运行下去，只能手动操作去检测。然而出现孔位偏差对于钣金件和冲压件来说又比较常见，那么我们该如何实现钣金件的高效检测呢。通过分析孔位发生偏差的特点，可以发现对于那整体偏向一个方向且偏差值比较接近的孔组，可以通过相对测量来解决。下面思瑞测量资深三坐标应用工程师为您讲解RatioanlDMIS是如何实现相...
RationalDMIS 2020 输出设置-设备定义
山涧果子（JIanhongwei810）
02-04 544
设备定义节点用来设置输出的设备以及输出设备的属性.RationalDMIS预定义了3种输出设备:文件,打印机和屏幕,其中文件又预定义了Excel文件和默认文件,见下图: 每个预定义的设备前都有一个复选框,选中某个设备前的复选框表示打开这个设备,不选中表示关闭设备. 还可以通过运行DMIS 程序来打开或关闭某些预定义设备, 这些设备包括Excel文件,打印机和屏幕,相应的DMIS关键字是OPEN/DID 、CLOSE/DID.而默认文件只能只能通过手工进行开关. 1.定义新的输出设备: 定义新的输出设备..
rationaldmis自动分中电极
最新发布
12-26
rationaldmis是一种先进的测量软件，可以用于自动分中电极。它具有强大的数据处理和分析功能，可以准确地识别和分析电极的形状和尺寸。通过合理设定测量参数和规则，rationaldmis可以自动识别工件上的电极，并根据预先设定的要求进行分析和测量。它能够快速准确地完成电极分析工作，大大提高了生产效率和质量保障能力。在工业生产中，rationaldmis的自动分中电极功能可以帮助企业节省大量人力和时间成本，提高工件加工的精度和一致性。它还可以通过自动生成的报告来展示电极分析的结果，帮助生产管理者了解和监控生产过程的质量状况，从而及时调整生产计划和工艺流程。总之，rationaldmis自动分中电极功能在工业制造中发挥着重要作用，为企业带来了巨大的生产效益和经济效益。

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

山涧果子

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付：¥1
获取中
扫码支付

您的余额不足，请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值