H3C和cisco单臂路由和三层交换机实现VLAN之间的互通

H3C单臂路由

实验拓扑
交换机配置

[sw1]vlan 10
[sw1-vlan10]vlan 20
[sw1-vlan20]port g1/0/2
[sw1-vlan20]vlan 10
[sw1-vlan10]port g1/0/1
[sw1-vlan10]int g1/0/3
[sw1-GigabitEthernet1/0/3]port link-type trunk
[sw1-GigabitEthernet1/0/3]port trunk permit vlan 10 20

路由器配置

[R1]int g0/0.10  //进入子接口
[R1-GigabitEthernet0/0.10]vlan-type dot1q vid 10 //开启802.1q服务，标签为VLAN 10
[R1-GigabitEthernet0/0.10]ip add 192.168.1.254 24 //子接口ip
[R1-GigabitEthernet0/0.10]int g0/0.20  //进入子接口
[R1-GigabitEthernet0/0.20]vlan-type dot1q vid 20
[R1-GigabitEthernet0/0.20]ip add 192.168.2.254 24

H3C三层交换机

实验拓扑
三层交换机配置

[sw2]int vlan 10  //华三的交换机本就是三层，不需要其他的命令开启
[sw2-Vlan-interface10]ip add 192.168.1.254 24
[sw2-Vlan-interface10]int vlan 20
[sw2-Vlan-interface20]ip add 192.168.2.254 24
[sw2-Vlan-interface20]qu
[sw2]int g1/0/1
[sw2-GigabitEthernet1/0/1]port link-type