单片机串口通信接受多个字节在LCD1602实时显示

为了检测我的单片机接受数据能正常显示，修改了原本只能从串口一次读单个字节的程序，其实很简单，但是折腾挺久的。

#include "DSP2833x_Device.h"     // DSP2833x Headerfile Include File
#include "DSP2833x_Examples.h"   // DSP2833x Examples Include File
#include "key.h"
#include "leds.h"
#include "time.h"
#include "uart.h"
#include "stdio.h"
#include "lcd1602.h"
void main()
{
	char *msg;
	Uint16 num=0;
	char key=0;
	InitSysCtrl();
	InitPieCtrl();
	IER = 0x0000;
	IFR = 0x0000;
	InitPieVectTable();
	KEY_Init();
	UARTa_Init(9600);
	LCD1602_Init();
	while(1)
	{
		key=KEY_Scan(1);
		switch(key)
		{
			case KEY1_PRESS:
				msg = "begin";
				UARTa_SendString(msg);//发送启动消息给上位机
				break;
			case KEY2_PRESS:
				msg = "ending";
				UARTa_SendString(msg);//发送结束消息给上位机
				break;
			case KEY3_PRESS:
				LED4_TOGGLE;
				msg = "L15000";
				UARTa_SendString(msg);//发送绳长给上位机
		}
		char sdataB[8];
		Uint16 empty_fifo_number,i;
	    if(SciaRegs.SCIFFRX.bit.RXFFST > 0)
		{           
		 empty_fifo_number = SciaRegs.SCIFFRX.bit.RXFFST;
		  for(i=0;i<empty_fifo_number;i++)
			 {
			   sdataB[i] = SciaRegs.SCIRXBUF.all;//从上位机通过串口获取数据
			 }
		 }
	 if(num==100)
	  {
		 LCD1602_DispString(1,sdataB);//发送给LCD1602
		 num=0;
		 DELAY_US(1000);
	     num++;
	   }
}