acl实验报告

一、实验拓扑

二、实验思路

1.全网互通

2.PC1可以访问Tenlnet  R1，不能ping  R1

3.PC1不能访问Tenlnet  R2，但可以ping R2

4.PC2和PC1相反

三、实验步骤

1.配置IP地址，实现全网可达

[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip add 192.168.1.254 24
[R1-GigabitEthernet0/0/0]int g0/0/1
[R1-GigabitEthernet0/0/1]ip add 192.168.2.1 24
 

[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip add 192.168.2.2 24
[R2-GigabitEthernet0/0/0]quit
[R2]ip route-static 192.168.1.0 24 192.168.2.1
 

[PC1]int g0/0/0
[PC1-GigabitEthernet0/0/0]ip add 192.168.1.10 24
[PC1-GigabitEthernet0/0/0]ip route-static 0.0.0.0 0 192.168.1.254
 

[PC2]int g0/0/0
[PC2-GigabitEthernet0/0/0]ip add 192.168.1.11 24
[PC2-GigabitEthernet0/0/0]ip route-static 0.0.0.0 0 192.168.1.254
 

2.配置Tenlnet

[R1]aaa
[R1-aaa]local-user wangdaye privilege level 15 password cipher wdy12345
[R1-aaa]local-user wangdaye service-type telnet
[R1-aaa]quit
[R1]user-interface vty 0 4
[R1-ui-vty0-4]authentication-mode aaa
 

[R2]aaa
[R2-aaa]local-user wangdaye privilege level 15 password cipher wdy12345
[R2-aaa]local-user wangdaye service-type telnet
[R2-aaa]quit
[R2]user-interface vty 0 4
[R2-ui-vty0-4]authentication-mode aaa
 

3.配置ACL

[R1]acl 3000
[R1-acl-adv-3000]rule deny icmp source 192.168.1.10 0.0.0.0 destination 192.168.
2.1 0.0.0.0
[R1-acl-adv-3000]rule deny icmp source 192.168.1.10 0.0.0.0 destination 192.168.
1.254 0.0.0.0
[R1-acl-adv-3000]rule deny tcp source 192.168.1.10 0.0.0.0 destination 192.168.2
.2 0.0.0.0 destination-port eq 23
[R1-acl-adv-3000]rule deny tcp source 192.168.1.11 0.0.0.0 destination 192.168.2
.1 0.0.0.0 destination-port eq 23

[R1-acl-adv-3000]rule deny tcp source 192.168.1.10 0.0.0.0 destination 192.168.1
.254 0.0.0.0 destination-port eq 23
[R1-acl-adv-3000]rule deny icmp source 192.168.1.11 0.0.0.0 destination 192.168.
2.2 0.0.0.0
[R1-acl-adv-3000]quit
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]traffic-filter inbound acl 3000
 

4.测试