【ENSP】配置链路聚合

LSW1交换机配置

u t m
sys
sysname S_A
vlan batch 10 30         #创建vlan
int g0/0/6               #进接口
port link-type access    #设置端口类型
port default vlan 10     #设置默认通行的vlan
int g0/0/11
port link-type access
port default vlan 30
int vlan 10              #进入vlanif接口
ip add 192.168.10.254 24 #配置ip地址
int vlan 30
ip add 192.168.30.254 24

int eth-trunk 4          #进入trunk口
port link-type trunk        
port trunk allow-pass vlan 10 30

int g0/0/1
eth-trunk 4              #设置为eth-trunk
int g0/0/2
eth-trunk 4

LSW2交换机配置

u t m
sys
sysname S_B
vlan batch 10 30
int e0/0/5
port link-type access
port default vlan 10

int eth-trunk 4
port link-type trunk
port trunk allow-pass vlan 10 30

int g0/0/1
eth-trunk 4
int g0/0/2
eth-trunk 4