华为ensp 链路聚合（超简洁命令）

拓扑：

在lsw1、lsw2的上创建Eth-Trunk 1 ，并将e0/0/2和e0/0/3划分到Eth-Trunk 1下

[sw1]int Eth-Trunk 1
[sw1-Ethernet0/0/2]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw1-Ethernet0/0/2]eth-trunk 1
[sw1-Ethernet0/0/2]int e0/0/3
[sw1-Ethernet0/0/3]eth-trunk 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw1-Ethernet0/0/3]int eth 1
[sw1-Eth-Trunk1]q
[sw1]dis eth 1  // 查看
Eth-Trunk1's state information is:
WorkingMode: NORMAL         Hash arithmetic: According to SIP-XOR-DIP         
Least Active-linknumber: 1  Max Bandwidth-affected-linknumber: 8              
Operate status: up          Number Of Up Port In Trunk: 2                     
--------------------------------------------------------------------------------
PortName                      Status      Weight 
Ethernet0/0/2                 Up          1      
Ethernet0/0/3                 Up          1  

[sw2]int Eth-Trunk 1
[sw2-Eth-Trunk1]int e0/0/2
[sw2-Ethernet0/0/2]eth 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw2-Ethernet0/0/2]Interface Eth-Trunk1 
[sw2-Ethernet0/0/2]int e0/0/3
[sw2-Ethernet0/0/3]eth 1
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw2-Ethernet0/0/3]q
    
[sw2]dis eth-trunk 1
Eth-Trunk1's state information is:
WorkingMode: NORMAL         Hash arithmetic: According to SIP-XOR-DIP         
Least Active-linknumber: 1  Max Bandwidth-affected-linknumber: 8              
Operate status: up          Number Of Up Port In Trunk: 2                     
--------------------------------------------------------------------------------
PortName                      Status      Weight 
Ethernet0/0/2                 Up          1      
Ethernet0/0/3                 Up          1