MSP430F5529 DriverLib 库函数I2C驱动OLED屏幕

平台：Code Composer Studio 10.4.0
MSP430F5529 LaunchPad™ Development Kit
(MSP‑EXP430F5529LP)

---

I2C驱动代码

P3.0为SDA，P3.1为SCL

MSP430F5529_I2C.c

#include "driverlib.h"

#define I2C_USCI_BASE USCI_B0_BASE
#define I2C_USCI_VECTOR USCI_B0_VECTOR
#define I2C_USCI_IV UCB0IV

#define I2C_BUF_LENGTH 32
static char i2c_buf[I2C_BUF_LENGTH];
static uint8_t i2c_buf_len = 0;
static uint8_t i2c_buf_cur = 0;

static uint8_t *i2c_rx_buf = 0;
static uint8_t i2c_rx_buf_len = 0;

void Init_I2C_GPIO(void)
{
    /* Select I2C function for I2C_SDA & I2C_SCL */
    GPIO_setAsPeripheralModuleFunctionOutputPin(
            GPIO_PORT_P3,
            GPIO_PIN0 | GPIO_PIN1);
}


/***************************************************************************//**
 * @brief  Configures I2C
 * @param  none
 * @return none
 ******************************************************************************/

void I2C_init(uint8_t slaveAddress)
{
  /* I2C Master Configuration Parameter */
  USCI_B_I2C_initMasterParam i2cConfig =
  {
    USCI_B_I2C_CLOCKSOURCE_SMCLK,
    UCS_getSMCLK(),
    USCI_B_I2C_SET_DATA_RATE_400KBPS
  };
  /* Initialize USCI_B0 and I2C Master to communicate with slave devices*/
  USCI_B_I2C_initMaster(I2C_USCI_BASE, &i2cConfig);

  /* Enable I2C Module to start operations */
  USCI_B_I2C_enable(I2C_USCI_BASE);

  // Specify slave address
  USCI_B_I2C_setSlaveAddress(I2C_USCI_BASE, slaveAddress);
  USCI_B_I2C_clearInterrupt(I2C_USCI_BASE, USCI_B_I2C_RECEIVE_INTERRUPT);
  USCI_B_I2C_enableInterrupt(I2C_USCI_BASE, USCI_B_I2C_RECEIVE_INTERRUPT);
  USCI_B_I2C_clearInterrupt(I2C_USCI_BASE, USCI_B_I2C_TRANSMIT_INTERRUPT);
  USCI_B_I2C_enableInterrupt(I2C_USCI_BASE, USCI_B_I2C_TRANSMIT_INTERRUPT);

    return;
}


/* write a byte to specific register, cannot called in interrupt context */
void writeByte(uint8_t byte)
{
    while (USCI_B_I2C_isBusBusy(I2C_USCI_BASE));

    USCI_B_I2C_setMode(I2C_USCI_BASE, USCI_B_I2C_TRANSMIT_MODE);

    // Initiate start and send first character
    i2c_buf[0] = byte;
    i2c_buf_cur = 1;
    i2c_buf_len = 1;
    USCI_B_I2C_masterSendMultiByteStart(I2C_USCI_BASE, i2c_buf[0]);

    // wait for end
    __bis_SR_register(GIE + LPM0_bits);
    __no_operation();
}

/* write a word to specific register, cannot called in interrupt context */
void writeWord(uint16_t word)
{
    while (USCI_B_I2C_isBusBusy(I2C_USCI_BASE));

    USCI_B_I2C_setMode(I2C_USCI_BASE, USCI_B_I2C_TRANSMIT_MODE);

    // Initiate start and send first character
    i2c_buf[0] = word >> 8;
    i2c_buf[1] = (uint8_t)word;
    i2c_buf_cur = 1;
    i2c_buf_len = 2;
    USCI_B_I2C_masterSendMultiByteStart(I2C_USCI_BASE, i2c_buf[0]);

    // wait for end
    __bis_SR_register(GIE + LPM0_bits);
    __no_operation();
}

///* set/clear some bit to specific register, cannot called in interrupt context */
//void writeBit(uint8_t regAddr, uint8_t bitNum, uint8_t data)
//{
//    uint8_t b = 0;
//    readByte(regAddr, &b);
//    delay_ms(2);
//    b = (data != 0) ? (b | (1 << bitNum)) : (b & ~(1 << bitNum));
//    writeByte(regAddr, b);
//}

/* read some byte from specific register, cannot called in interrupt context */
void readByte(uint8_t RegAddr, uint8_t* b)
{
	while (USCI_B_I2C_isBusBusy(I2C_USCI_BASE));

    // send address
    USCI_B_I2C_setMode(I2C_USCI_BASE, USCI_B_I2C_TRANSMIT_MODE);
    i2c_buf_cur = 1;
    i2c_buf_len = 1;
    USCI_B_I2C_masterSendSingleByte(I2C_USCI_BASE, RegAddr);

    // receive
    USCI_B_I2C_setMode(I2C_USCI_BASE, USCI_B_I2C_RECEIVE_MODE);
    i2c_rx_buf = b;
    i2c_rx_buf_len = 1;
    USCI_B_I2C_masterReceiveSingleStart(I2C_USCI_BASE);

//     wait for end
    __bis_SR_register(GIE + LPM0_bits);
    __no_operation();
}

void readBytes(uint8_t RegAddr, uint8_t length, uint8_t* data)
{
	while (USCI_B_I2C_isBusBusy(I2C_USCI_BASE));
    // send address
    USCI_B_I2C_setMode(I2C_USCI_BASE, USCI_B_I2C_TRANSMIT_MODE);
    i2c_buf_cur = 1;
    i2c_buf_len = 1;
    USCI_B_I2C_masterSendSingleByte(I2C_USCI_BASE, RegAddr);

    // receive
    USCI_B_I2C_setMode(I2C_USCI_BASE, USCI_B_I2C_RECEIVE_MODE);
    i2c_rx_buf = data;
    i2c_rx_buf_len = length;
    USCI_B_I2C_masterReceiveMultiByteStart(I2C_USCI_BASE);

    // wait for end
    __bis_SR_register(GIE + LPM0_bits);
    __no_operation();
}

#pragma vector = I2C_USCI_VECTOR
__interrupt void USCI_B0_ISR(void)
{
    switch (__even_in_range(I2C_USCI_IV, 12))
    {
        case USCI_I2C_UCTXIFG:
            if (i2c_buf_cur < i2c_buf_len)
            {
                USCI_B_I2C_masterSendMultiByteNext( I2C_USCI_BASE, i2c_buf[i2c_buf_cur]);
                i2c_buf_cur++;
            }
            else
            {
                USCI_B_I2C_masterSendMultiByteStop(I2C_USCI_BASE);
                //Clear master interrupt status
                USCI_B_I2C_clearInterrupt(I2C_USCI_BASE,
                                          USCI_B_I2C_TRANSMIT_INTERRUPT);
                __bic_SR_register_on_exit(LPM0_bits);
            }
            break;
        case USCI_I2C_UCRXIFG:
            i2c_rx_buf_len--;
            if(i2c_rx_buf_len)
            {
                if(i2c_rx_buf_len== 1)
                {
                    //Initiate end of reception -> Receive byte with NAK
                    *i2c_rx_buf++ = USCI_B_I2C_masterReceiveMultiByteFinish( I2C_USCI_BASE);
                }
                else
                {
                    //Keep receiving one byte at a time
                    *i2c_rx_buf++ = USCI_B_I2C_masterReceiveMultiByteNext( I2C_USCI_BASE);
                }
            }
            else
            {
                //Receive last byte
                *i2c_rx_buf= USCI_B_I2C_masterReceiveMultiByteNext(I2C_USCI_BASE);
                __bic_SR_register_on_exit(LPM0_bits);
            }
            break;
    }
}

MSP430F5529_I2C.h

#ifndef MSP430F5529_I2C_H_
#define MSP430F5529_I2C_H_

void Init_I2C_GPIO(void);
void I2C_init(uint8_t slaveAddress);
void writeByte(uint8_t byte);
void writeWord(uint16_t word);
void readByte(uint8_t RegAddr, uint8_t* b);
void readBytes(uint8_t RegAddr, uint8_t length, uint8_t* data);

#endif /* MSP430F5529_I2C_H_ */

OLED初始化及测试

#include "driverlib.h"
#include "MSP430F5529_I2C.h"
#include "./OLED/OLED.h"

#define MCLK_IN_HZ      25000000

#define delay_us(x)     __delay_cycles((MCLK_IN_HZ/1000000*(x)))
#define delay_ms(x)     __delay_cycles((MCLK_IN_HZ/1000*(x)))

void SystemClock_Init(void)
{
    PMM_setVCore(PMM_CORE_LEVEL_3);     //高主频工作需要较高的核心电压

    //XT1引脚复用
    GPIO_setAsPeripheralModuleFunctionInputPin(GPIO_PORT_P5, GPIO_PIN4);
    GPIO_setAsPeripheralModuleFunctionOutputPin(GPIO_PORT_P5, GPIO_PIN5);

    //起振XT1
    UCS_turnOnLFXT1(UCS_XT1_DRIVE_3,UCS_XCAP_3);

    //XT2引脚复用
    GPIO_setAsPeripheralModuleFunctionInputPin(GPIO_PORT_P5, GPIO_PIN2);
    GPIO_setAsPeripheralModuleFunctionOutputPin(GPIO_PORT_P5, GPIO_PIN3);

    //起振XT2
    UCS_turnOnXT2(UCS_XT2_DRIVE_4MHZ_8MHZ);

    //XT2作为FLL参考时钟，先8分频，再50倍频 4MHz / 8 * 50 = 25MHz
    UCS_initClockSignal(UCS_FLLREF, UCS_XT2CLK_SELECT, UCS_CLOCK_DIVIDER_8);
    UCS_initFLLSettle(25000, 50);

    //XT1作为ACLK时钟源 = 32768Hz
    UCS_initClockSignal(UCS_ACLK, UCS_XT1CLK_SELECT, UCS_CLOCK_DIVIDER_1);

    //DCOCLK作为MCLK时钟源 = 25MHz
    UCS_initClockSignal(UCS_MCLK, UCS_DCOCLK_SELECT, UCS_CLOCK_DIVIDER_1);

    //DCOCLK作为SMCLK时钟源 = 25MHz
    UCS_initClockSignal(UCS_SMCLK, UCS_DCOCLK_SELECT, UCS_CLOCK_DIVIDER_1);

    //设置外部时钟源的频率，使得在调用UCS_getMCLK, UCS_getSMCLK 或 UCS_getACLK时可得到正确值
    UCS_setExternalClockSource(32768, 4000000);
}

int main(void)
{
    WDT_A_hold(WDT_A_BASE);
    SystemClock_Init();

    Init_I2C_GPIO();
    I2C_init(OLED_ADDRESS >> 1);

    __bis_SR_register(GIE);

	OLED_Init();
	OLED_Clear();
	OLED_Display_On();
	OLED_ShowString(0, 0, "MSP430F5529 OLED", 1);
	OLED_ShowString(0, 2, "   2021-08-05", 1);

    while(1)
    {
    	delay_ms(1000);
    }
}

OLED驱动代码

OLED.c

/*
 * OLED.c
 *
 *  Created on: Jan 17, 2021
 *      Author: Royic
 */


#include "OLED.h"
#include <stdlib.h>
#include "OLED_Font.h"
#include "MSP430F5529_I2C.h"

//OLED的显存
//存放格式如下.
//[0]0 1 2 3 ... 127
//[1]0 1 2 3 ... 127
//[2]0 1 2 3 ... 127
//[3]0 1 2 3 ... 127
//[4]0 1 2 3 ... 127
//[5]0 1 2 3 ... 127
//[6]0 1 2 3 ... 127
//[7]0 1 2 3 ... 127

uint16_t TxData = 0;
void Write_IIC_Command(unsigned char I2C_Command)//写命令
{
//    uint16_t Data = (OLED_WriteCom_Addr << 8) | I2C_Command;
    TxData = (OLED_WriteCom_Addr << 8) | I2C_Command;
    writeWord(TxData);
}

/*
 * 第1个参数为I2C操作句柄
   第2个参数为从机设备地址
   第3个参数为从机寄存器地址
   第4个参数为从机寄存器地址长度
   第5个参数为发送的数据
   第6个参数为传输数据的大小
   第7个参数为操作超时时间 　　*/


void Write_IIC_Data(unsigned char IIC_Data)//写数据
{
//    uint16_t Data = 0;
    TxData = (OLED_WriteData_Addr << 8) | IIC_Data;
    writeWord(TxData);
}


void OLED_WR_Byte(unsigned dat,unsigned cmd)
{
	if(cmd)
	{
		Write_IIC_Data(dat);
	}
	else
	{
		Write_IIC_Command(dat);
	}
}


/********************************************
// fill_Picture
********************************************/
void fill_picture(unsigned char fill_Data)
{
	unsigned char m,n;
	for(m=0;m<8;m++)
	{
		OLED_WR_Byte(0xb0+m,0);		//page0-page1
		OLED_WR_Byte(0x00,0);		//low column start address
		OLED_WR_Byte(0x10,0);		//high column start address
		for(n=0;n<128;n++)
		{
			OLED_WR_Byte(fill_Data,1);
		}
	}
}


//坐标设置

void OLED_Set_Pos(unsigned char x, unsigned char y)
{
	OLED_WR_Byte(0xb0+y,OLED_CMD);
	OLED_WR_Byte(((x&0xf0)>>4)|0x10,OLED_CMD);
	OLED_WR_Byte((x&0x0f),OLED_CMD);
}

//开启OLED显示
void OLED_Display_On(void)
{
	OLED_WR_Byte(0X8D,OLED_CMD);  //SET DCDC命令
	OLED_WR_Byte(0X14,OLED_CMD);  //DCDC ON
	OLED_WR_Byte(0XAF,OLED_CMD);  //DISPLAY ON
}

//关闭OLED显示
void OLED_Display_Off(void)
{
	OLED_WR_Byte(0X8D,OLED_CMD);  //SET DCDC命令
	OLED_WR_Byte(0X10,OLED_CMD);  //DCDC OFF
	OLED_WR_Byte(0XAE,OLED_CMD);  //DISPLAY OFF
}

//清屏函数,清完屏,整个屏幕是黑色的!和没点亮一样!!!
void OLED_Clear(void)
{
	uint8_t i,n;
	for(i=0;i<8;i++)
	{
		OLED_WR_Byte (0xb0+i,OLED_CMD);    //设置页地址（0~7）
		OLED_WR_Byte (0x00,OLED_CMD);      //设置显示位置—列低地址
		OLED_WR_Byte (0x10,OLED_CMD);      //设置显示位置—列高地址
		for(n=0;n<128;n++)
			OLED_WR_Byte(0,OLED_DATA);
	} //更新显示
}

void OLED_On(void)
{
	uint8_t i,n;
	for(i=0;i<8;i++)
	{
		OLED_WR_Byte (0xb0+i,OLED_CMD);    //设置页地址（0~7）
		OLED_WR_Byte (0x00,OLED_CMD);      //设置显示位置—列低地址
		OLED_WR_Byte (0x10,OLED_CMD);      //设置显示位置—列高地址
		for(n=0;n<128;n++)
			OLED_WR_Byte(1,OLED_DATA);
	} //更新显示
}

//在指定位置显示一个字符,包括部分字符
//x:0~127
//y:0~63
//mode:0,反白显示;1,正常显示
//size:选择字体 1——8*16 0——6*8
void OLED_ShowChar(uint8_t x,uint8_t y,uint8_t chr,uint8_t Char_Size)
{
	unsigned char c=0,i=0;
	c=chr-' ';//得到偏移后的值
	if(x>Max_Column-1)
		{x=0;y=y+2;}
	if(Char_Size)
	{
		OLED_Set_Pos(x,y);
		for(i=0;i<8;i++)
			OLED_WR_Byte(F8X16[c*16+i],OLED_DATA);
		OLED_Set_Pos(x,y+1);
		for(i=0;i<8;i++)
			OLED_WR_Byte(F8X16[c*16+i+8],OLED_DATA);
	}
	else
	{
		OLED_Set_Pos(x,y);
		for(i=0;i<6;i++)
			OLED_WR_Byte(F6x8[c][i],OLED_DATA);
	}
}

//m^n函数
uint32_t oled_pow(uint8_t m,uint8_t n)
{
	uint32_t result=1;
	while(n--)
		result*=m;
	return result;
}

//显示2个数字
//x,y :起点坐标
//len :数字的位数
//size:字体大小
//mode:模式	0,填充模式;1,叠加模式
//num:数值(0~4294967295);
void OLED_ShowNum(uint8_t x,uint8_t y,uint32_t num,uint8_t len,uint8_t size2)
{
	uint8_t t,temp;
	uint8_t enshow=0;
	for(t=0;t<len;t++)
	{
		temp=(num/oled_pow(10,len-t-1))%10;
		if(enshow==0&&t<(len-1))
		{
			if(temp==0)
			{
				OLED_ShowChar(x+(size2/2)*t,y,' ',size2);
				continue;
			}
			else
				enshow=1;
		}
	 	OLED_ShowChar(x+(size2/2)*t,y,temp+'0',size2);
	}
}

//显示一个字符号串
void OLED_ShowString(uint8_t x,uint8_t y,uint8_t *chr,uint8_t Char_Size)
{
	unsigned char j=0;
	while (chr[j]!='\0')
	{
		OLED_ShowChar(x,y,chr[j],Char_Size);
		x+=8;
		if(x>120)
			{x=0;y+=2;}
		j++;
	}
}

//显示汉字
void OLED_ShowCHinese(uint8_t x,uint8_t y,uint8_t no)
{
	uint8_t t,adder=0;
	OLED_Set_Pos(x,y);
    for(t=0;t<16;t++)
	{
    	OLED_WR_Byte(Hzk[2*no][t],OLED_DATA);
    	adder+=1;
	}
	OLED_Set_Pos(x,y+1);
	for(t=0;t<16;t++)
	{
		OLED_WR_Byte(Hzk[2*no+1][t],OLED_DATA);
		adder+=1;
	}
}

/***********功能描述：显示显示BMP图片128×64起始点坐标(x,y),x的范围0～127，y为页的范围0～7*****************/
void OLED_DrawBMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[])
{
	unsigned int j=0;
	unsigned char x,y;

	if(y1%8==0)
		y=y1/8;
	else
		y=y1/8+1;
	for(y=y0;y<y1;y++)
	{
		OLED_Set_Pos(x0,y);
		for(x=x0;x<x1;x++)
		{
			OLED_WR_Byte(BMP[j++],OLED_DATA);
		}
	}
}

//初始化SSD1306
void OLED_Init(void)
{

	OLED_WR_Byte(0xAE,OLED_CMD);//--display off
	OLED_WR_Byte(0x00,OLED_CMD);//---set low column address
	OLED_WR_Byte(0x10,OLED_CMD);//---set high column address
	OLED_WR_Byte(0x40,OLED_CMD);//--set start line address
	OLED_WR_Byte(0xB0,OLED_CMD);//--set page address
	OLED_WR_Byte(0x81,OLED_CMD); // contract control
	OLED_WR_Byte(0xFF,OLED_CMD);//--128
	OLED_WR_Byte(0xA1,OLED_CMD);//set segment remap
	OLED_WR_Byte(0xA6,OLED_CMD);//--normal / reverse
	OLED_WR_Byte(0xA8,OLED_CMD);//--set multiplex ratio(1 to 64)
	OLED_WR_Byte(0x3F,OLED_CMD);//--1/32 duty
	OLED_WR_Byte(0xC8,OLED_CMD);//Com scan direction
	OLED_WR_Byte(0xD3,OLED_CMD);//-set display offset
	OLED_WR_Byte(0x00,OLED_CMD);//

	OLED_WR_Byte(0xD5,OLED_CMD);//set osc division
	OLED_WR_Byte(0x80,OLED_CMD);//

	OLED_WR_Byte(0xD8,OLED_CMD);//set area color mode off
	OLED_WR_Byte(0x05,OLED_CMD);//

	OLED_WR_Byte(0xD9,OLED_CMD);//Set Pre-Charge Period
	OLED_WR_Byte(0xF1,OLED_CMD);//

	OLED_WR_Byte(0xDA,OLED_CMD);//set com pin configuartion
	OLED_WR_Byte(0x12,OLED_CMD);//

	OLED_WR_Byte(0xDB,OLED_CMD);//set Vcomh
	OLED_WR_Byte(0x30,OLED_CMD);//

	OLED_WR_Byte(0x8D,OLED_CMD);//set charge pump enable
	OLED_WR_Byte(0x14,OLED_CMD);//

	OLED_WR_Byte(0xAF,OLED_CMD);//--turn on oled panel
}

OLED.h

/*
 * OLED.h
 *
 *  Created on: Jan 17, 2021
 *      Author: Royic
 */

#ifndef OLED_OLED_H_
#define OLED_OLED_H_

#include <stdlib.h>
#include <stdint.h>

#define Scr12864_HI2C hi2c1

#define OLED_MODE 0
#define SIZE 8
#define XLevelL		0x00
#define XLevelH		0x10
#define Max_Column	128
#define Max_Row		64
#define	Brightness	0xFF
#define X_WIDTH 	128
#define Y_WIDTH 	64

#define OLED_ADDRESS 0x78
//设备地址

#define OLED_WriteCom_Addr	0x00	//从机写指令地址
#define OLED_WriteData_Addr	0x40	//从机写数据地址

#define OLED_CMD  0	//写命令
#define OLED_DATA 1	//写数据

//OLED控制用函数
void OLED_WR_Byte(unsigned dat,unsigned cmd);
void OLED_Display_On(void);
void OLED_Display_Off(void);
void OLED_Init(void);
void OLED_Clear(void);
void OLED_DrawPoint(uint8_t x,uint8_t y,uint8_t t);
void OLED_Fill(uint8_t x1,uint8_t y1,uint8_t x2,uint8_t y2,uint8_t dot);
void OLED_ShowChar(uint8_t x,uint8_t y,uint8_t chr,uint8_t Char_Size);
void OLED_ShowNum(uint8_t x,uint8_t y,uint32_t num,uint8_t len,uint8_t size);
void OLED_ShowString(uint8_t x,uint8_t y, uint8_t *p,uint8_t Char_Size);
void OLED_Set_Pos(unsigned char x, unsigned char y);
void OLED_ShowCHinese(uint8_t x,uint8_t y,uint8_t no);
void OLED_DrawBMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[]);

void fill_picture(unsigned char fill_Data);

void Write_IIC_Command(unsigned char IIC_Command);
void Write_IIC_Data(unsigned char IIC_Data);
void Write_IIC_Byte(unsigned char IIC_Byte);

#endif /* OLED_OLED_H_ */

OLED_Font.h

/*
 * OLED_Font.h
 *
 *  Created on: Jan 17, 2021
 *      Author: Royic
 */

#ifndef OLED_OLED_FONT_H
#define OLED_OLED_FONT_H

//常用ASCII表

const unsigned char F6x8[][6] =
{
    {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // sp
    {0x00, 0x00, 0x00, 0x2f, 0x00, 0x00}, // !
    {0x00, 0x00, 0x07, 0x00, 0x07, 0x00}, // "
    {0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14}, // #
    {0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12}, // $
    {0x00, 0x62, 0x64, 0x08, 0x13, 0x23}, // %
    {0x00, 0x36, 0x49, 0x55, 0x22, 0x50}, // &
    {0x00, 0x00, 0x05, 0x03, 0x00, 0x00}, // '
    {0x00, 0x00, 0x1c, 0x22, 0x41, 0x00}, // (
    {0x00, 0x00, 0x41, 0x22, 0x1c, 0x00}, // )
    {0x00, 0x14, 0x08, 0x3E, 0x08, 0x14}, // *
    {0x00, 0x08, 0x08, 0x3E, 0x08, 0x08}, // +
    {0x00, 0x00, 0x00, 0xA0, 0x60, 0x00}, // ,
    {0x00, 0x08, 0x08, 0x08, 0x08, 0x08}, // -
    {0x00, 0x00, 0x60, 0x60, 0x00, 0x00}, // .
    {0x00, 0x20, 0x10, 0x08, 0x04, 0x02}, // /
    {0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E}, // 0
    {0x00, 0x00, 0x42, 0x7F, 0x40, 0x00}, // 1
    {0x00, 0x42, 0x61, 0x51, 0x49, 0x46}, // 2
    {0x00, 0x21, 0x41, 0x45, 0x4B, 0x31}, // 3
    {0x00, 0x18, 0x14, 0x12, 0x7F, 0x10}, // 4
    {0x00, 0x27, 0x45, 0x45, 0x45, 0x39}, // 5
    {0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30}, // 6
    {0x00, 0x01, 0x71, 0x09, 0x05, 0x03}, // 7
    {0x00, 0x36, 0x49, 0x49, 0x49, 0x36}, // 8
    {0x00, 0x06, 0x49, 0x49, 0x29, 0x1E}, // 9
    {0x00, 0x00, 0x36, 0x36, 0x00, 0x00}, // :
    {0x00, 0x00, 0x56, 0x36, 0x00, 0x00}, // ;
    {0x00, 0x08, 0x14, 0x22, 0x41, 0x00}, // <
    {0x00, 0x14, 0x14, 0x14, 0x14, 0x14}, // =
    {0x00, 0x00, 0x41, 0x22, 0x14, 0x08}, // >
    {0x00, 0x02, 0x01, 0x51, 0x09, 0x06}, // ?
    {0x00, 0x32, 0x49, 0x59, 0x51, 0x3E}, // @
    {0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C}, // A
    {0x00, 0x7F, 0x49, 0x49, 0x49, 0x36}, // B
    {0x00, 0x3E, 0x41, 0x41, 0x41, 0x22}, // C
    {0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C}, // D
    {0x00, 0x7F, 0x49, 0x49, 0x49, 0x41}, // E
    {0x00, 0x7F, 0x09, 0x09, 0x09, 0x01}, // F
    {0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A}, // G
    {0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F}, // H
    {0x00, 0x00, 0x41, 0x7F, 0x41, 0x00}, // I
    {0x00, 0x20, 0x40, 0x41, 0x3F, 0x01}, // J
    {0x00, 0x7F, 0x08, 0x14, 0x22, 0x41}, // K
    {0x00, 0x7F, 0x40, 0x40, 0x40, 0x40}, // L
    {0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F}, // M
    {0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F}, // N
    {0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E}, // O
    {0x00, 0x7F, 0x09, 0x09, 0x09, 0x06}, // P
    {0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E}, // Q
    {0x00, 0x7F, 0x09, 0x19, 0x29, 0x46}, // R
    {0x00, 0x46, 0x49, 0x49, 0x49, 0x31}, // S
    {0x00, 0x01, 0x01, 0x7F, 0x01, 0x01}, // T
    {0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F}, // U
    {0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F}, // V
    {0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F}, // W
    {0x00, 0x63, 0x14, 0x08, 0x14, 0x63}, // X
    {0x00, 0x07, 0x08, 0x70, 0x08, 0x07}, // Y
    {0x00, 0x61, 0x51, 0x49, 0x45, 0x43}, // Z
    {0x00, 0x00, 0x7F, 0x41, 0x41, 0x00}, // [
    {0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55}, // 55
    {0x00, 0x00, 0x41, 0x41, 0x7F, 0x00}, // ]
    {0x00, 0x04, 0x02, 0x01, 0x02, 0x04}, // ^
    {0x00, 0x40, 0x40, 0x40, 0x40, 0x40}, // _
    {0x00, 0x00, 0x01, 0x02, 0x04, 0x00}, // '
    {0x00, 0x20, 0x54, 0x54, 0x54, 0x78}, // a
    {0x00, 0x7F, 0x48, 0x44, 0x44, 0x38}, // b
    {0x00, 0x38, 0x44, 0x44, 0x44, 0x20}, // c
    {0x00, 0x38, 0x44, 0x44, 0x48, 0x7F}, // d
    {0x00, 0x38, 0x54, 0x54, 0x54, 0x18}, // e
    {0x00, 0x08, 0x7E, 0x09, 0x01, 0x02}, // f
    {0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C}, // g
    {0x00, 0x7F, 0x08, 0x04, 0x04, 0x78}, // h
    {0x00, 0x00, 0x44, 0x7D, 0x40, 0x00}, // i
    {0x00, 0x40, 0x80, 0x84, 0x7D, 0x00}, // j
    {0x00, 0x7F, 0x10, 0x28, 0x44, 0x00}, // k
    {0x00, 0x00, 0x41, 0x7F, 0x40, 0x00}, // l
    {0x00, 0x7C, 0x04, 0x18, 0x04, 0x78}, // m
    {0x00, 0x7C, 0x08, 0x04, 0x04, 0x78}, // n
    {0x00, 0x38, 0x44, 0x44, 0x44, 0x38}, // o
    {0x00, 0xFC, 0x24, 0x24, 0x24, 0x18}, // p
    {0x00, 0x18, 0x24, 0x24, 0x18, 0xFC}, // q
    {0x00, 0x7C, 0x08, 0x04, 0x04, 0x08}, // r
    {0x00, 0x48, 0x54, 0x54, 0x54, 0x20}, // s
    {0x00, 0x04, 0x3F, 0x44, 0x40, 0x20}, // t
    {0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C}, // u
    {0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C}, // v
    {0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C}, // w
    {0x00, 0x44, 0x28, 0x10, 0x28, 0x44}, // x
    {0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C}, // y
    {0x00, 0x44, 0x64, 0x54, 0x4C, 0x44}, // z
    {0x14, 0x14, 0x14, 0x14, 0x14, 0x14}, // horiz lines
};


/****************************************8*16的点阵************************************/
const unsigned char F8X16[]=
{
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0
  0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1
  0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
  0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3
  0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4
  0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5
  0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6
  0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
  0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8
  0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9
  0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10
  0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14
  0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16
  0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17
  0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18
  0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19
  0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20
  0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21
  0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22
  0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23
  0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25
  0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26
  0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27
  0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28
  0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29
  0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30
  0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31
  0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32
  0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33
  0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34
  0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35
  0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38
  0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40
  0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41
  0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42
  0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43
  0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44
  0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45
  0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47
  0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49
  0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50
  0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51
  0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53
  0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54
  0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55
  0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56
  0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57
  0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58
  0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59
  0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60
  0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61
  0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63
  0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65
  0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66
  0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67
  0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69
  0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71
  0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72
  0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73
  0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74
  0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75
  0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76
  0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77
  0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79
  0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80
  0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81
  0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83
  0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84
  0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86
  0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87
  0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89
  0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90
  0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91
  0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92
  0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93
  0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};

const char Hzk[][32]={
{0x00,0x00,0xF0,0x10,0x10,0x10,0x10,0xFF,0x10,0x10,0x10,0x10,0xF0,0x00,0x00,0x00},
{0x00,0x00,0x0F,0x04,0x04,0x04,0x04,0xFF,0x04,0x04,0x04,0x04,0x0F,0x00,0x00,0x00},/*"中",0*/

{0x40,0x40,0x40,0x5F,0x55,0x55,0x55,0x75,0x55,0x55,0x55,0x5F,0x40,0x40,0x40,0x00},
{0x00,0x40,0x20,0x0F,0x09,0x49,0x89,0x79,0x09,0x09,0x09,0x0F,0x20,0x40,0x00,0x00},/*"景",1*/

{0x00,0xFE,0x02,0x42,0x4A,0xCA,0x4A,0x4A,0xCA,0x4A,0x4A,0x42,0x02,0xFE,0x00,0x00},
{0x00,0xFF,0x40,0x50,0x4C,0x43,0x40,0x40,0x4F,0x50,0x50,0x5C,0x40,0xFF,0x00,0x00},/*"园",2*/

{0x00,0x00,0xF8,0x88,0x88,0x88,0x88,0xFF,0x88,0x88,0x88,0x88,0xF8,0x00,0x00,0x00},
{0x00,0x00,0x1F,0x08,0x08,0x08,0x08,0x7F,0x88,0x88,0x88,0x88,0x9F,0x80,0xF0,0x00},/*"电",3*/

{0x80,0x82,0x82,0x82,0x82,0x82,0x82,0xE2,0xA2,0x92,0x8A,0x86,0x82,0x80,0x80,0x00},
{0x00,0x00,0x00,0x00,0x00,0x40,0x80,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"子",4*/

{0x24,0x24,0xA4,0xFE,0xA3,0x22,0x00,0x22,0xCC,0x00,0x00,0xFF,0x00,0x00,0x00,0x00},
{0x08,0x06,0x01,0xFF,0x00,0x01,0x04,0x04,0x04,0x04,0x04,0xFF,0x02,0x02,0x02,0x00},/*"科",5*/

{0x10,0x10,0x10,0xFF,0x10,0x90,0x08,0x88,0x88,0x88,0xFF,0x88,0x88,0x88,0x08,0x00},
{0x04,0x44,0x82,0x7F,0x01,0x80,0x80,0x40,0x43,0x2C,0x10,0x28,0x46,0x81,0x80,0x00},/*"?",0*/

{0x40,0x40,0x48,0x48,0x48,0xC8,0x78,0x4F,0x48,0x48,0x48,0x48,0x48,0x40,0x40,0x00},
{0x00,0x00,0x00,0x00,0x03,0x12,0x12,0x22,0x22,0x52,0x8A,0x06,0x00,0x00,0x00,0x00},/*"专",0*/

{0x00,0x10,0x60,0x80,0x00,0xFF,0x00,0x00,0x00,0xFF,0x00,0x00,0xC0,0x30,0x00,0x00},
{0x40,0x40,0x40,0x43,0x40,0x7F,0x40,0x40,0x40,0x7F,0x42,0x41,0x40,0x40,0x40,0x00},/*"业",1*/

{0x10,0x10,0x10,0xFF,0x10,0x90,0x08,0x88,0x88,0x88,0xFF,0x88,0x88,0x88,0x08,0x00},
{0x04,0x44,0x82,0x7F,0x01,0x80,0x80,0x40,0x43,0x2C,0x10,0x28,0x46,0x81,0x80,0x00},/*"技",2*/

{0x00,0x10,0x10,0x10,0x10,0xD0,0x30,0xFF,0x30,0xD0,0x12,0x1C,0x10,0x10,0x00,0x00},
{0x10,0x08,0x04,0x02,0x01,0x00,0x00,0xFF,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x00},/*"术",3*/

{0x00,0x00,0xFE,0x22,0x22,0x22,0xFE,0x00,0xFE,0x82,0x82,0x92,0xA2,0x9E,0x00,0x00},
{0x80,0x60,0x1F,0x02,0x42,0x82,0x7F,0x00,0xFF,0x40,0x2F,0x10,0x2C,0x43,0x80,0x00},/*"服",4*/

{0x00,0x00,0x90,0x88,0x4C,0x57,0xA4,0x24,0x54,0x54,0x8C,0x84,0x00,0x00,0x00,0x00},
{0x01,0x01,0x80,0x42,0x22,0x1A,0x07,0x02,0x42,0x82,0x42,0x3E,0x01,0x01,0x01,0x00},/*"务",5*/

{0x00,0x04,0xE4,0x24,0x2C,0xB4,0x25,0x26,0x24,0xB4,0x2C,0x24,0xE4,0x04,0x00,0x00},
{0x00,0x00,0xFF,0x02,0x01,0x1E,0x12,0x12,0x12,0x1E,0x41,0x82,0x7F,0x00,0x00,0x00},/*"商",6*/
};

#endif /* OLED_OLED_FONT_H */

显示效果