eNSP经常使用的命令

已于 2022-05-29 07:03:31 修改
阅读量2k 收藏 5
点赞数
分类专栏： 网络工程师 文章标签： p2p debian 网络协议
于 2021-12-16 17:06:55 首次发布
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/weixin_44732231/article/details/121978872
版权

 显示vlan

[Huawei-vlan10]display vlan

* : management-vlan

---------------------

The total number of vlans is : 2

VLAN ID Type         Status   MAC Learning Broadcast/Multicast/Unicast Property

--------------------------------------------------------------------------------

1       common       enable   enable       forward   forward   forward default 

10      common       enable   enable       forward   forward   forward default 

 

退出

[Huawei-vlan10]quit

 

显示可用命令

 [huawei]?

System view commands:

  aaa                          <Group> aaa command group

  aaa-authen-bypass            Set remote authentication bypass

  aaa-author-bypass            Set remote authorization bypass

  aaa-author-cmd-bypass        Set remote command authorization bypass

  access-user                  User access

  acl                          Specify ACL configuration information

  alarm                        Alarm

  anti-attack                  Specify anti-attack configurations

  application-apperceive       Set application-apperceive information

  arp                          <Group> arp command group

  arp-miss                     <Group> arp-miss command group

  arp-ping                     ARP-ping

  arp-suppress                 Specify arp suppress configuration information, 

                               default is disabled

  as-notation                  The AS notation

  authentication               Authentication

  autoconfig                   Auto-config

  backup                       Backup  information

  bfd                          Specify BFD(Bidirectional Forwarding Detection) 

                               configuration information

  bgp                          Border Gateway Protocol(BGP)

  bitschip                     Reset bits chip

  bridge                       Bridge

 

显示已敲命令

[huawei]display this

[V200R003C00]

#

 sysname huawei

#

 snmp-agent local-engineid 800007DB03000000000000

 snmp-agent

#

 clock timezone China-Standard-Time minus 08:00:00

#

portal local-server load portalpage.zip

#

 drop illegal-mac alarm

#

vlan batch 10

#

 set cpu-usage threshold 80 restore 75

#

return

 

 

显示配置信息

 [huawei]display current-configuration

[V200R003C00]

#

 sysname huawei

#

 snmp-agent local-engineid 800007DB03000000000000

 snmp-agent

#

 clock timezone China-Standard-Time minus 08:00:00

#

portal local-server load portalpage.zip

#

 drop illegal-mac alarm

#

vlan batch 10

#

 set cpu-usage threshold 80 restore 75

#

acl number 2000 

#

aaa

 authentication-scheme default

 authorization-scheme default

 accounting-scheme default

 domain default

 domain default_admin

 local-user admin password cipher %$%$K8m.Nt84DZ}e#<0`8bmE3Uw}%$%$

 local-user admin service-type http

#

firewall zone Local

 priority 15

#

interface Ethernet0/0/0

#

interface Ethernet0/0/1

#

interface Ethernet0/0/2

#

interface Ethernet0/0/3

#

interface Ethernet0/0/4

#

interface Ethernet0/0/5

#

interface Ethernet0/0/6

#

interface Ethernet0/0/7

#

interface GigabitEthernet0/0/0

 ip address 12.1.1.1 255.255.255.0

#

interface GigabitEthernet0/0/1

#

interface NULL0

#

user-interface con 0

 authentication-mode password

user-interface vty 0 4

user-interface vty 16 20

#

wlan ac

#

return

[huawei]

 

 

 

配置ip

<Huawei>sy

Enter system view, return user view with Ctrl+Z.

[Huawei]int g0/0/0

[Huawei-GigabitEthernet0/0/0]ip add 12.1.2.11 24

Nov 15 2021 10:16:39-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[0]:The line protocol

 IP on the interface GigabitEthernet0/0/0 has entered the UP state.

[Huawei-GigabitEthernet0/0/0]

 

显示端口

<Huawei>display interface brief

PHY: Physical

*down: administratively down

(l): loopback

(s): spoofing

(b): BFD down

^down: standby

(e): ETHOAM down

(d): Dampening Suppressed

InUti/OutUti: input utility/output utility

Interface                   PHY   Protocol InUti OutUti   inErrors  outErrors

Ethernet0/0/0               down  down        0%     0%          0          0

Ethernet0/0/1               down  down        0%     0%          0          0

Ethernet0/0/2               down  down        0%     0%          0          0

Ethernet0/0/3               down  down        0%     0%          0          0

Ethernet0/0/4               down  down        0%     0%          0          0

Ethernet0/0/5               down  down        0%     0%          0          0

Ethernet0/0/6               down  down        0%     0%          0          0

Ethernet0/0/7               down  down        0%     0%          0          0

GigabitEthernet0/0/0        up    up          0%     0%          0          0

GigabitEthernet0/0/1        up    down        0%     0%          0          0

NULL0                       up    up(s)       0%     0%          0          0

<Huawei>

 

取消ip

[Huawei-GigabitEthernet0/0/0]undo ip add 12.1.2.11 24

Nov 15 2021 10:28:12-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[0]:The line protocol

 IP on the interface GigabitEthernet0/0/0 has entered the DOWN state.

[Huawei-GigabitEthernet0/0/0]

 

 

选择显示那一部分信息

[Huawei]display current-configuration | b aaa

aaa

 authentication-scheme default

 authorization-scheme default

 accounting-scheme default

 domain default

 domain default_admin

 local-user admin password cipher %$%$K8m.Nt84DZ}e#<0`8bmE3Uw}%$%$

 local-user admin service-type http

#

firewall zone Local

 priority 15

#

interface Ethernet0/0/0

#

interface Ethernet0/0/1

#

interface Ethernet0/0/2

#

interface Ethernet0/0/3

#

interface Ethernet0/0/4

#

interface Ethernet0/0/5

#

interface Ethernet0/0/6

#

interface Ethernet0/0/7

#

interface GigabitEthernet0/0/0

#

interface GigabitEthernet0/0/1

#

interface NULL0

#

user-interface con 0

 authentication-mode password

user-interface vty 0 4

user-interface vty 16 20

#

wlan ac

#

return

[Huawei]

 

 

 

改名字

[Huawei]sysname huawei

[huawei]

 

设置登录前显示信息

[huawei]header login information "weclome to the panboyu"

[huawei]header login information "weclome to the panboyu"

 

 

 

设置远程登陆账号

<huawei>sy

Enter system view, return user view with Ctrl+Z.

[huawei]int g0/0/0

[huawei-GigabitEthernet0/0/0]ip add 12.1.1.1 24

Nov 17 2021 20:18:32-08:00 huawei %%01IFNET/4/LINK_STATE(l)[0]:The line protocol

 IP on the interface GigabitEthernet0/0/0 has entered the UP state.

[huawei-GigabitEthernet0/0/0]

[huawei-GigabitEthernet0/0/0]q

[huawei]q

<huawei>sy

[huawei]

[huawei]user-interface vty 0 4

[huawei-ui-vty0-4]

[huawei-ui-vty0-4]

[huawei-ui-vty0-4]

[huawei-ui-vty0-4]authentication-mode password

Please configure the login password (maximum length 16):08302002

[huawei-ui-vty0-4]

 [huawei-ui-vty0-4]display ip int br

*down: administratively down

^down: standby

(l): loopback

(s): spoofing

The number of interface that is UP in Physical is 2

The number of interface that is DOWN in Physical is 1

The number of interface that is UP in Protocol is 2

The number of interface that is DOWN in Protocol is 1

Interface                         IP Address/Mask      Physical   Protocol 

GigabitEthernet0/0/0              12.1.1.1/24          up         up       

GigabitEthernet0/0/1              unassigned           down       down     

NULL0                             unassigned           up         up(s)    

[huawei-ui-vty0-4]

[huawei-ui-vty0-4]

[huawei-ui-vty0-4]

[huawei-ui-vty0-4]q

[huawei]q

<huawei>

<huawei>telnet 12.1.1.1

  Press CTRL_] to quit telnet mode

  Trying 12.1.1.1 ...

  Connected to 12.1.1.1 ...

weclome to the panboyu

Login authentication

Password:

  Configuration console exit, please retry to log on

 

  The connection was closed by the remote host

<huawei>

或

<AR1>sy

Enter system view, return user view with Ctrl+Z.

[AR1]user-interface vty 0 4

[AR1-ui-vty0-4]athen

[AR1-ui-vty0-4]authen   

 

 

[AR1-ui-vty0-4]authentication-mode password

Please configure the login password (maximum length 16):

Please configure the login password (maximum length 16):123456

[AR1-ui-vty0-4]q

[AR1]user-interface vty 0 4

[AR1-ui-vty0-4]dis ip int brief

*down: administratively down

^down: standby

(l): loopback

(s): spoofing

The number of interface that is UP in Physical is 6

The number of interface that is DOWN in Physical is 0

The number of interface that is UP in Protocol is 6

The number of interface that is DOWN in Protocol is 0

 

Interface                         IP Address/Mask      Physical   Protocol 

GigabitEthernet0/0/0              12.1.3.1/24          up         up       

GigabitEthernet0/0/1              12.1.2.1/24          up         up       

GigabitEthernet0/0/2              12.2.2.1/24          up         up       

LoopBack1                         13.1.5.1/24          up         up(s)    

LoopBack2                         13.1.6.1/24          up         up(s)    

NULL0                             unassigned           up         up(s)    

[AR1-ui-vty0-4]

Dec 12 2021 09:34:40-08:00 AR1 ARP/4/ARP_IPCONFLICT_TRAP:OID 16777216.50331648.1

00663296.16777216.67108864.16777216.3674669056.83886080.419430400.2063597568.335

54432.100663296 ARP detects IP conflict. (IP address=1.2.1.12, Local interface=G

igabitEthernet0/0/1, Local MAC=00e0-fc3b-137a, Local vlan=0, Local CE vlan=0, Re

ceive interface=GigabitEthernet0/0/1, Receive MAC=00e0-fc04-19da, Receive vlan=0

, Receive CE vlan=0, IP conflict type=Local IP conflict).

 

[AR1-ui-vty0-4]q

[AR1]q

<AR1>telnet 12.1.3.1

  Press CTRL_] to quit telnet mode

  Trying 12.1.3.1 ...

  Connected to 12.1.3.1 ...

 

Login authentication

 

 

Password:

<AR1>

 

 

 

 

登录的显示信息

<huawei>q

 

  Configuration console exit, please press any key to log on

 

<huawei>sy

Enter system view, return user view with Ctrl+Z.

[huawei]header shell information "weclome to the panboyu"

[huawei]

[huawei]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

weclome to the panboyu

<huawei>

<huawei>

<huawei>

<huawei>

<huawei>

<huawei>

<huawei>q

 

  Configuration console exit, please press any key to log on

 

weclome to the panboyu

<huawei>

<huawei>

<huawei>

 

 

 

 

 

Ospf

watermark,type_d3F5LXplbmhlaQ,shadow_50,text_Q1NETiBA5r2Y5Y2a6KOV,size_20,color_FFFFFF,t_70,g_se,x_16

AR2

<AR2>

<AR2>

<AR2>sy

Enter system view, return user view with Ctrl+Z.

[AR2]ospf 2 router-id 12.1.5.1

[AR2-ospf-2]are 1

[AR2-ospf-2-area-0.0.0.1]network 11.2.3.254 0.0.255.255

[AR2-ospf-2-area-0.0.0.1]network 11.1.0.0 0.0.255.255

[AR2-ospf-2-area-0.0.0.1]are 0

[AR2-ospf-2-area-0.0.0.0]

[AR2-ospf-2-area-0.0.0.0]network 11.1.1.1 0.0.0.255

[AR2-ospf-2-area-0.0.0.0]

[AR2-ospf-2-area-0.0.0.0]

[AR2-ospf-2-area-0.0.0.0]

Dec 14 2021 16:52:18-08:00 AR2 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=512, NeighborAddress=1.1.1.11, Neighbor

Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

[AR2-ospf-2-area-0.0.0.0]

Dec 14 2021 16:52:18-08:00 AR2 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=512, NeighborAddress=1.1.1.11, Neighbor

Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)

[AR2-ospf-2-area-0.0.0.0]

Dec 14 2021 16:52:18-08:00 AR2 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=512, NeighborAddress=1.1.1.11, Neighbor

Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)

[AR2-ospf-2-area-0.0.0.0]

Dec 14 2021 16:52:18-08:00 AR2 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=512, NeighborAddress=1.1.1.11, Neighbor

Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha

nge)

[AR2-ospf-2-area-0.0.0.0]

Dec 14 2021 16:52:18-08:00 AR2 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=512, NeighborAddress=1.1.1.11, Neighbor

Event=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading

)

[AR2-ospf-2-area-0.0.0.0]

Dec 14 2021 16:52:18-08:00 AR2 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=512, NeighborAddress=1.1.1.11, Neighbor

Event=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)

[AR2-ospf-2-area-0.0.0.0]

 

 

 

<AR2>

<AR2>

<AR2>sy

Enter system view, return user view with Ctrl+Z.

[AR2]ospf 2

 [AR2-ospf-2]are 2

[AR2-ospf-2-area-0.0.0.2]network 11.1.3.1 0.0.0.255

[AR2-ospf-2-area-0.0.0.2]

Dec 14 2021 17:02:03-08:00 AR2 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=512, NeighborAddress=2.3.1.11, Neighbor

Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

[AR2-ospf-2-area-0.0.0.2]

Dec 14 2021 17:02:07-08:00 AR2 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=512, NeighborAddress=2.3.1.11, Neighbor

Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)

 

 

 

 

 

AR1

[AR1]ospf 2 router-id 12.1.1.1

[AR1-ospf-2]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

<AR1>

<AR1>

<AR1>

<AR1>sy

Enter system view, return user view with Ctrl+Z.

[AR1]ospf 2

[AR1-ospf-2]are 0

[AR1-ospf-2-area-0.0.0.0]network 11.2.1.254 0.0.255.255

[AR1-ospf-2-area-0.0.0.0]network 11.1.0.0 0.0.255.255

[AR1-ospf-2-area-0.0.0.0]undo network 11.1.0.0 0.0.255.255

[AR1-ospf-2-area-0.0.0.0]

[AR1-ospf-2-area-0.0.0.0]

[AR1-ospf-2-area-0.0.0.0]

[AR1-ospf-2-area-0.0.0.0]

[AR1-ospf-2-area-0.0.0.0]

[AR1-ospf-2-area-0.0.0.0]

[AR1-ospf-2-area-0.0.0.0]network 11.1.1.1 0.0.0.255

[AR1-ospf-2-area-0.0.0.0]network 11.1.2.1 0.0.0.255

[AR1-ospf-2-area-0.0.0.0]

Dec 14 2021 16:52:12-08:00 AR1 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=512, NeighborAddress=2.1.1.11, Neighbor

Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

[AR1-ospf-2-area-0.0.0.0]

Dec 14 2021 16:52:18-08:00 AR1 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=512, NeighborAddress=2.1.1.11, Neighbor

Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)

[AR1-ospf-2-area-0.0.0.0]

Dec 14 2021 16:52:18-08:00 AR1 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=512, NeighborAddress=2.1.1.11, Neighbor

Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha

nge)

[AR1-ospf-2-area-0.0.0.0]

Dec 14 2021 16:52:18-08:00 AR1 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=512, NeighborAddress=2.1.1.11, Neighbor

Event=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading

)

[AR1-ospf-2-area-0.0.0.0]

Dec 14 2021 16:52:18-08:00 AR1 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=512, NeighborAddress=2.1.1.11, Neighbor

Event=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)

[AR1-ospf-2-area-0.0.0.0]

[AR1-ospf-2-area-0.0.0.0]

[AR1-ospf-2-area-0.0.0.0]

[AR1-ospf-2-area-0.0.0.0]

[AR1-ospf-2-area-0.0.0.0]

[AR1-ospf-2-area-0.0.0.0]

[AR1-ospf-2-area-0.0.0.0]are 1

[AR1-ospf-2-area-0.0.0.1]network 11.1.1.2 0.0.0.255

Error: The specified network command has been occupied by another area or proces

s.

[AR1-ospf-2-area-0.0.0.1]

 

 

 

AR3

AR3>

<AR3>

<AR3>

<AR3>sy

Enter system view, return user view with Ctrl+Z.

[AR3]ospf 2 router-id 12.1.3.1

[AR3-ospf-2]are 2

[AR3-ospf-2-area-0.0.0.2]network 11.2.2.254 0.0.0.255

 [AR3-ospf-2-area-0.0.0.2]network 11.1.3.2 0.0.0.255

[AR3-ospf-2-area-0.0.0.2]net

Dec 14 2021 17:02:06-08:00 AR3 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=512, NeighborAddress=1.3.1.11, Neighbor

Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)

[AR3-ospf-2-area-0.0.0.2]net

Dec 14 2021 17:02:06-08:00 AR3 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=512, NeighborAddress=1.3.1.11, Neighbor

Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)

[AR3-ospf-2-area-0.0.0.2]net

Dec 14 2021 17:02:06-08:00 AR3 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=512, NeighborAddress=1.3.1.11, Neighbor

Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)

[AR3-ospf-2-area-0.0.0.2]net

Dec 14 2021 17:02:06-08:00 AR3 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=512, NeighborAddress=1.3.1.11, Neighbor

Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha

nge)

[AR3-ospf-2-area-0.0.0.2]net

Dec 14 2021 17:02:06-08:00 AR3 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=512, NeighborAddress=1.3.1.11, Neighbor

Event=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading

)

[AR3-ospf-2-area-0.0.0.2]net

Dec 14 2021 17:02:06-08:00 AR3 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes ev

ent: neighbor status changed. (ProcessId=512, NeighborAddress=1.3.1.11, Neighbor

Event=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)

[AR3-ospf-2-area-0.0.0.2]network 11.1.2.2 0.0.0.255

[AR3-ospf-2-area-0.0.0.2]

[AR3-ospf-2-area-0.0.0.2]

[AR3-ospf-2-area-0.0.0.2]

[AR3-ospf-2-area-0.0.0.2]

<AR3>

<AR3>

<AR3>

<AR3>sy

Enter system view, return user view with Ctrl+Z.

[AR3]dis ospf lsdb

 

     OSPF Process 2 with Router ID 12.1.3.1

        Link State Database

 

                Area: 0.0.0.2

 Type      LinkState ID    AdvRouter          Age  Len   Sequence   Metric

 Router    12.1.3.1        12.1.3.1           333  60    80000007       1

 Router    12.1.5.1        12.1.5.1           399  36    80000005       1

 Network   11.1.3.1        12.1.5.1           399  32    80000002       0

 Sum-Net   11.1.1.0        12.1.5.1           517  28    80000001       1

 Sum-Net   11.2.3.0        12.1.5.1           517  28    80000001       1

 Sum-Net   11.2.1.0        12.1.5.1           517  28    80000001       2

 

 

 

Ripwatermark,type_d3F5LXplbmhlaQ,shadow_50,text_Q1NETiBA5r2Y5Y2a6KOV,size_20,color_FFFFFF,t_70,g_se,x_16

Ar9

AR9]rip

[AR9-rip-1]network 12.0.0.0

[AR9-rip-1]

[AR9-rip-1]

[AR9-rip-1]

[AR9-rip-1]

[AR9-rip-1]

[AR9-rip-1]ping 12.1.1.1

  PING 12.1.1.1: 56  data bytes, press CTRL_C to break

    Request time out

    Reply from 12.1.1.1: bytes=56 Sequence=2 ttl=254 time=40 ms

    Reply from 12.1.1.1: bytes=56 Sequence=3 ttl=254 time=40 ms

    Reply from 12.1.1.1: bytes=56 Sequence=4 ttl=254 time=20 ms

    Reply from 12.1.1.1: bytes=56 Sequence=5 ttl=254 time=20 ms

 

  --- 12.1.1.1 ping statistics ---

    5 packet(s) transmitted

    4 packet(s) received

    20.00% packet loss

    round-trip min/avg/max = 20/30/40 ms

 

[AR9-rip-1]

[AR9-rip-1]ping 12.1.1.2

  PING 12.1.1.2: 56  data bytes, press CTRL_C to break

    Reply from 12.1.1.2: bytes=56 Sequence=1 ttl=255 time=60 ms

    Reply from 12.1.1.2: bytes=56 Sequence=2 ttl=255 time=10 ms

    Reply from 12.1.1.2: bytes=56 Sequence=3 ttl=255 time=30 ms

    Reply from 12.1.1.2: bytes=56 Sequence=4 ttl=255 time=20 ms

    Reply from 12.1.1.2: bytes=56 Sequence=5 ttl=255 time=20 ms

 

  --- 12.1.1.2 ping statistics ---

    5 packet(s) transmitted

    5 packet(s) received

    0.00% packet loss

    round-trip min/avg/max = 10/28/60 ms

 

[AR9-rip-1]ping 12.2.3.2

  PING 12.2.3.2: 56  data bytes, press CTRL_C to break

    Request time out

    Reply from 12.2.3.2: bytes=56 Sequence=2 ttl=255 time=50 ms

    Reply from 12.2.3.2: bytes=56 Sequence=3 ttl=255 time=20 ms

    Reply from 12.2.3.2: bytes=56 Sequence=4 ttl=255 time=20 ms

    Reply from 12.2.3.2: bytes=56 Sequence=5 ttl=255 time=20 ms

 

  --- 12.2.3.2 ping statistics ---

    5 packet(s) transmitted

    4 packet(s) received

    20.00% packet loss

    round-trip min/avg/max = 20/27/50 ms

 

[AR9-rip-1]dis ip rou

Route Flags: R - relay, D - download to fib

------------------------------------------------------------------------------

Routing Tables: Public

         Destinations : 22       Routes : 25      

 

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

 

       12.1.1.0/24  RIP     100  1           D   12.1.3.1        GigabitEthernet

0/0/0

                    RIP     100  1           D   12.1.2.1        GigabitEthernet

0/0/1

       12.1.2.0/24  Direct  0    0           D   12.1.2.2        GigabitEthernet

0/0/1

       12.1.2.2/32  Direct  0    0           D   127.0.0.1       GigabitEthernet

0/0/1

     12.1.2.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet

0/0/1

       12.1.3.0/24  Direct  0    0           D   12.1.3.2        GigabitEthernet

0/0/0

       12.1.3.2/32  Direct  0    0           D   127.0.0.1       GigabitEthernet

0/0/0

     12.1.3.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet

0/0/0

       12.2.1.0/24  RIP     100  1           D   12.2.2.1        GigabitEthernet

0/0/2

                    RIP     100  1           D   12.1.3.1        GigabitEthernet

0/0/0

       12.2.2.0/24  Direct  0    0           D   12.2.2.2        GigabitEthernet

0/0/2

       12.2.2.2/32  Direct  0    0           D   127.0.0.1       GigabitEthernet

0/0/2

     12.2.2.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet

0/0/2

       12.2.3.0/24  RIP     100  1           D   12.2.2.1        GigabitEthernet

0/0/2

                    RIP     100  1           D   12.1.2.1        GigabitEthernet

0/0/1

       13.1.5.0/24  Direct  0    0           D   13.1.5.1        LoopBack1

       13.1.5.1/32  Direct  0    0           D   127.0.0.1       LoopBack1

     13.1.5.255/32  Direct  0    0           D   127.0.0.1       LoopBack1

       13.1.6.0/24  Direct  0    0           D   13.1.6.1        LoopBack2

       13.1.6.1/32  Direct  0    0           D   127.0.0.1       LoopBack2

     13.1.6.255/32  Direct  0    0           D   127.0.0.1       LoopBack2

      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0

      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0

127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

 

[AR9-rip-1]

 

AR8

 

<AR8>sy

Enter system view, return user view with Ctrl+Z.

[AR8]rip

[AR8-rip-1]network 12.0.0.0

[AR8-rip-1]

 [AR8-rip-1]

[AR8-rip-1]net 12.2.0.0

Error: The network address is invalid, and the specified address must be major-n

et address without any subnets.

[AR8-rip-1]

 

AR7

<AR7>sy

Enter system view, return user view with Ctrl+Z.

[AR7]rip

[AR7-rip-1]net 12.0.0.0

[AR7-rip-1]dis ip rou

Route Flags: R - relay, D - download to fib

------------------------------------------------------------------------------

Routing Tables: Public

         Destinations : 22       Routes : 25      

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

 

       12.1.1.0/24  Direct  0    0           D   12.1.1.2        GigabitEthernet

0/0/0

       12.1.1.2/32  Direct  0    0           D   127.0.0.1       GigabitEthernet

0/0/0

     12.1.1.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet

0/0/0

       12.1.2.0/24  RIP     100  1           D   12.1.3.2        GigabitEthernet

0/0/1

                    RIP     100  1           D   12.1.1.1        GigabitEthernet

0/0/0

       12.1.3.0/24  Direct  0    0           D   12.1.3.1        GigabitEthernet

0/0/1

       12.1.3.1/32  Direct  0    0           D   127.0.0.1       GigabitEthernet

0/0/1

     12.1.3.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet

0/0/1

       12.2.1.0/24  Direct  0    0           D   12.2.1.1        GigabitEthernet

0/0/2

       12.2.1.1/32  Direct  0    0           D   127.0.0.1       GigabitEthernet

0/0/2

     12.2.1.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet

0/0/2

       12.2.2.0/24  RIP     100  1           D   12.2.1.2        GigabitEthernet

0/0/2

                    RIP     100  1           D   12.1.3.2        GigabitEthernet

0/0/1

       12.2.3.0/24  RIP     100  1           D   12.2.1.2        GigabitEthernet

0/0/2

                    RIP     100  1           D   12.1.1.1        GigabitEthernet

0/0/0

       13.1.3.0/24  Direct  0    0           D   13.1.3.1        LoopBack1

       13.1.3.1/32  Direct  0    0           D   127.0.0.1       LoopBack1

     13.1.3.255/32  Direct  0    0           D   127.0.0.1       LoopBack1

       13.1.4.0/24  Direct  0    0           D   13.1.4.1        LoopBack2

       13.1.4.1/32  Direct  0    0           D   127.0.0.1       LoopBack2

     13.1.4.255/32  Direct  0    0           D   127.0.0.1       LoopBack2

      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0

      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0

127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

 

 

AR6

 

<AR6>

Error: Unrecognized command found at '^' position.

<AR6>sy

Enter system view, return user view with Ctrl+Z.

[AR6]rip

[AR6-rip-1]net 12.0.0.0

[AR6-rip-1]

开通ping服务

[fw2001730-GigabitEthernet1/0/1]int g1/0/4
[fw2001730-GigabitEthernet1/0/4]service-manage ping permit
[fw2001730-GigabitEthernet1/0/4] 

 

配置安全策略

[fw2001730]security-policy
[fw2001730-policy-security]rule name policy-sec
[fw2001730-policy-security-rule-policy-sec]source-zone trust
[fw2001730-policy-security-rule-policy-sec]destination-zone untrust
[fw2001730-policy-security-rule-policy-sec]action permit
[fw2001730-policy-security-rule-policy-sec]q
[fw2001730-policy-security]q

 

检查ip

[fw2001730]display ip interface brief
2022-03-16 06:28:23.350
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
(d): Dampening Suppressed
(E): E-Trunk down
The number of interface that is UP in Physical is 4
The number of interface that is DOWN in Physical is 6
The number of interface that is UP in Protocol is 4
The number of interface that is DOWN in Protocol is 6

Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              192.168.0.1/24       down       down      
GigabitEthernet1/0/0              unassigned           down       down      
GigabitEthernet1/0/1              10.1.2.254/24        up         up        
GigabitEthernet1/0/2              unassigned           down       down      
GigabitEthernet1/0/3              unassigned           down       down      
GigabitEthernet1/0/4              40.1.1.254/24        up         up        
GigabitEthernet1/0/5              unassigned           down       down      
GigabitEthernet1/0/6              unassigned           down       down      
NULL0                             unassigned           up         up(s)     
Virtual-if0                       unassigned           up         up(s)     

[fw2001730]

 

 

新建安全区域

[FW20001730]firewall zone name guest
[FW20001730-zone-guest]add int g1/0/0
[FW20001730-zone-guest]set p    
[FW20001730-zone-guest]set priority 40
[FW20001730-zone-guest]q

 

 

潘博裕
关注
  • 0
    点赞
  • 踩
  • 5
    收藏
    觉得还不错? 一键收藏
  • 打赏
    打赏
  • 1
    评论
专栏目录
HCIP------ospf综合
W981113的博客
01-27 1645
172.16.0.0/16 172.16. 000 00000.0/16 172.16.0.0/19 area0 172.16.32.0/19 area1 172.16.64.0/19 area2 172.16.96.0/19 area3 172.16.128.0/19 area4 172.16.160.0/19 EIGRP(RIP) 172.16.192.0/19 172.16.224.0/19 The device is running! sy Enter system vi..
eNSP---常用ping命令指南
weixin_48776593的博客
03-07 2741
（packets：数据包，报文）·远程系统的IP地址或主机名。）（remote:遥控，
eNSP - 网关之间互ping
AKUANer的博客
08-26 1万+
参考博客 http://www.360doc.com/content/20/0616/15/937580_918800222.shtml 网关IPIP地址、子网掩码、网关IP地址网关IP网关通信默认网关不同网关地址之间ping - ×同一网关地址网关和IP地址不统一 - ×网络地址不一致 - × IP地址、子网掩码、网关IP地址 一台上网的终端，必须设置 IP地址 子网掩码、 网关IP地址 【注】终端IP地址与网关IP地址需要属于同一个网段 网关IP 网关IP地址是终端访问外网的第一关，网关实际上是一
华为eNSP命令
最新发布
2303_77485198的博客
07-17 2673
ip ip-prefix local index 10 permit 200.1.1.0 24 greater-equal 32 less-equal 24 (建立 ip-prefix规则 名字为local 第10条 允许 ip为200.1.1.1 子网掩码在 24-32 长度内的)confederation peer-as { as-number-plain | as-number-dot } &<1-32> （指定属于同一个联盟的子AS号）
如何在eNSP将多台计算机ping通？
kittle_linxi的博客
11-26 1万+
实现多台计算机ping通实验
eNSP下不同网段之间ping通实验
热门推荐
weixin_46067990的博客
10-06 1万+
拓扑结构图： 首先，先给两台PC机分别配置好他们的IP地址、子网掩码和网关： PC1: IP地址：192.168.10.1 子网掩码：255.255.255.0 网关：192.168.10.254 PC2: IP地址：192.168.20.1 子网掩码：255.255.255.0 网关：192.168.20.254 IP和网关可以设置为别的，确保两台机器在两个不同的网段下就好了 下面进行交换机的配置： LSW1： sys //进入视图 sys L1 //把这台机器改名为L1，不改的话默认Huawei
eNSP命令行基础
m0_50818626的博客
03-17 3076
eNSP(Enterprise Network Simulation Platform)是一款由华为提供的免费的、可扩展的、图形化操作的网络仿真工具平台，主要对企业网络路由器、交换机进行软件仿真，呈现真实设备实景，支持大型网络模拟，让广大用户有机会在没有真实设备的情况下能够模拟演练，学习网络技术。2.可模拟PC终端、Hub、云、帧中继交换机等。[Huawei-ui-vty0-4] authentication-mode password/aaa //启用密码验证或AAA验证。
ensp命令大全（所有命令）
06-21
华为网络模拟器ensp中所有设备的命令，学习ensp的好东西，可以快速查出需要的命令。再也不用百度、翻书。
eNSP命令大全（所有命令）.pdf
11-08
本文将详细介绍eNSP（Enterprise ...通过掌握这些eNSP命令，用户能够高效地模拟和配置网络环境，进行网络故障排查、实验测试和学习网络技术。熟悉这些命令不仅有助于提高工作效率，还能提升对网络设备和协议的理解。
eNSP常用命令资料.pdf
07-27
在eNSP中，使用`interface Eth-Trunk`命令创建Eth-Trunk接口，如`[S1] interface Eth-Trunk 1`。接着，使用`eth-trunk`命令将物理接口加入到Eth-Trunk，如`[S1-GigabitEthernet0/0/1] eth-trunk 1`。负载分担模式可...
华为交换机路由器配置命令，eNSP模拟器命令大全
03-03
通过这些命令的学习与实践，用户能够更好地掌握华为数通设备的使用方法。 #### 二、基本视图切换命令 - **从用户视图切换到系统视图**： - `system-view`：此命令用于进入系统视图，以便进行各种配置操作。 - **从...
华为模拟器eNsp命令参考手册
12-10
理解这些基本命令对于有效地使用eNsp至关重要。 此外，eNsp还支持导入和导出配置文件，这在备份配置、迁移环境或者在多个项目间共享配置时非常有用。使用`import`和`export`命令可以实现这一点。同时，通过`save`...
ensp基础命令！
weixin_55496718的博客
04-27 1万+
文章目录ENSP命令小结（一）console配置模式配置密码（二） telnet：设置telnet（远程）配置（三）配置aaa登录验证（四）基本命令：（五）交换机基本命令：STP协议命令（六、路由器基本配置命令）VRRP命令：ACL配置命令：NAT配置命令：DHCP配置命令：RIP协议配置命令：OSPF协议配置命令BGP协议配置命令 ENSP命令小结 （一）console配置模式配置密码 user-interface console 0 ： 进入console配置界面。 aut
作业11.20
zhuqifan0412的博客
11-20 675
hcia
华为路由器：AR1200真机忘记Console口密码的处理方法全过程演示
迷逝
10-29 9120
方法：在BootROM下引导菜单中清除密码 全过程演示： Login authentication Password: Password: Password: Please retry after 5 seconds. Password: Please retry after 10 seconds. Password: Configuration console exit, please retry to log on Login authentication Passwo
【无标题】
wisdom_serein的博客
10-31 550
设备预配，用户密码、管理权限设置，两个用户ip地址的ping通
eNSP下测试 ping -r 和 tracert 结果分析
异次元网络的博客
05-01 1万+
ping -r：是用来检查目标的路由数量，每经过一个路由就是一个hop，如果节点数量太多，就会出现超时结果，具体数量取决于后面的数字，Windiws下取值为1-9 ，返回的是离本机比较远的网口的IP。 详情可查看ping命令用法大全→传送门：https://blog.csdn.net/awfiihmmmm/article/details/105780372 例如：ping 202.120.221....
二层主机发现-arping-ARP地址欺骗攻击-检测地址冲突
SCR_123的博客
08-15 686
arping 原理： ARP协议解析IP地址到mac地址的对应关系 arping发送ARP探测数据包 发送二层数据广播包，对应广播包正确IP地址的主机回应其mac地址 ARP缓存 查看缓存arp对应关系存储时间（默认60s），查看文件夹 cat /proc/sys/net/ipv4/neigh/default/gc_stale_time 关闭ARP缓存功能可预防IP和mac地址不对应带来的网络不通问题 ip link set arp off dev eth0 使用 单个IP arping -i eth
免费ARP和地址冲突检测
a3876247995的博客
04-21 2096
免费ARP 免费ARP的定义：主机发送ARP请求自己的地址，ARP报文中的源IP地址和目的IP都是自己，以太网报文中的源MAC是自己，目的MAC是全f，广播出去 免费ARP的使用场景：通常网口刚启动的时候发送。 免费ARP的作用： 确定是否有别人也使用了相同的IP，如果存在那么别的主机会应答这个免费ARP，同时本机会报错 针对网卡替换，IP不变的场景，用于刷新其他主机的ARP表项 地址冲突检测 地址冲突检测ACD和免费ARP有一点点不同。ACD包括ARP探测报文和ARP通告报文。 ARP探测报文：用于
eNSP中如何使用命令
05-10
在 eNSP 中使用命令需要进入设备的命令行界面。具体步骤如下： 1. 打开 eNSP 软件，并创建网络拓扑。 2. 双击需要配置的设备（如路由器或交换机）进入配置界面。 3. 点击界面上方的“Console”按钮，进入命令行界面。 4. 在命令行界面中输入需要执行的命令，按回车键执行。 5. 在命令行界面中输入“quit”命令退出命令行界面。 需要注意的是，不同的设备有不同的命令操作，具体可以参考设备的用户手册或官方文档。同时，在使用命令前最好先备份设备的配置，以防出现问题。
评论 1
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

潘博裕

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付：¥1
获取中
扫码支付

您的余额不足，请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值