作业11.20

r1-ospf-1-area-0.0.0.0]network 12.0.0.1 0.0.0.0
[r1-ospf-1-area-0.0.0.0]
Nov 20 2022 22:03:56-08:00 r1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 9, the ch
ange loop count is 0, and the maximum number of records is 4095.
[r1-ospf-1-area-0.0.0.0]net    
[r1-ospf-1-area-0.0.0.0]network 0.0.0.0 255.255.255.255
[r1-ospf-1-area-0.0.0.0]
Nov 20 2022 22:06:16-08:00 r1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 10, the c
hange loop count is 0, and the maximum number of records is 4095.
Nov 20 2022 22:09:46-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=12.0.0.2, NeighborEve
nt=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
Nov 20 2022 22:09:47-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=12.0.0.2, NeighborEve
nt=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
Nov 20 2022 22:09:47-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=12.0.0.2, NeighborEve
nt=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange
)
Nov 20 2022 22:09:47-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=12.0.0.2, NeighborEve
nt=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)
Nov 20 2022 22:09:47-08:00 r1 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=12.0.0.2, NeighborEve
nt=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) User interface con0 is available

Please Press ENTER.

<r1>sy    
<r1>system-view 
Enter system view, return user view with Ctrl+Z.
[r1]int    
[r1]interface e0/0/0
[r1-Ethernet0/0/0]ospf hallo t    
[r1-Ethernet0/0/0]ospf hallo timer    
[r1-Ethernet0/0/0]ospf hallo timer 5
                       ^
Error: Unrecognized command found at '^' position.
[r1-Ethernet0/0/0]ospg h    
[r1-Ethernet0/0/0]ospg     
[r1-Ethernet0/0/0]ospg ?
                  ^
Error: Unrecognized command found at '^' position.
[r1-Ethernet0/0/0]ospf
[r1-ospf-1]quit
[r1]int    
[r1]interface e0/0/0
[r1-Ethernet0/0/0]ospf h    
[r1-Ethernet0/0/0]ospf ?
  authentication-mode  Specify an authentication mode
  bfd                  Enable bfd on this interface
  cost                 Interface link cost
  dr-priority          Router priority
  enable               Enable OSPF in interface View
  filter-lsa-out       Configure LSA Filter policy
  ldp-sync             Enable LDP-OSPF synchronization
  mtu-enable           Enable checking MTU on DD packets
  network-type         Network link states
  p2mp-mask-ignore     OSPF P2MP ignores the mask check
  smart-discover       Enable smart-discover Function
  timer                Specify timer interval
  trans-delay          Link state transmit delay(Second)

[r1-Ethernet0/0/0]ospf t    
[r1-Ethernet0/0/0]ospf timer h    
[r1-Ethernet0/0/0]ospf timer hello 5
[r1-Ethernet0/0/0]
Nov 20 2022 22:37:28-08:00 r1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 11, the c
hange loop count is 0, and the maximum number of records is 4095.quit
[r1]int    
[r1]interface e0/0/
              ^
Error: Wrong parameter found at '^' position.
[r1]int    
[r1]interface e0/0/1
[r1-Ethernet0/0/1]ospf t    
[r1-Ethernet0/0/1]ospf timer h    
[r1-Ethernet0/0/1]ospf timer hello 5
[r1-Ethernet0/0/1]quit
[r1]itn    
[r1]int    
[r1]interface 
Nov 20 2022 22:37:58-08:00 r1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 12, the c
hange loop count is 0, and the maximum number of records is 4095.g0/0/0
[r1-GigabitEthernet0/0/0]ospf t    
[r1-GigabitEthernet0/0/0]ospf timer h    
[r1-GigabitEthernet0/0/0]ospf timer hello 5
[r1-GigabitEthernet0/0/0]quit
Nov 20 2022 22:38:18-08:00 r1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 13, the c
hange loop count is 0, and the maximum number of records is 4095.
[r1]
[r1]
Nov 20 2022 22:38:33-08:00 r1 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neigh
bor state changed to Down. (ProcessId=1, NeighborAddress=12.0.0.2, NeighborEvent
=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down)
Nov 20 2022 22:38:33-08:00 r1 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state le
aves full or changed to Down. (ProcessId=1, NeighborRouterId=12.0.0.2, NeighborA
reaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=Nei
ghbor Down Due to Inactivity, NeighborDownPrimeReason=Interface Parameter Mismat
ch, NeighborChangeTime=2022-11-20 22:38:33-08:00)

<Huawei>sys    
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sy    
[Huawei]sysname r2
[r2]
Nov 20 2022 20:28:15-08:00 r2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 1, the ch
ange loop count is 0, and the maximum number of records is 4095.
[r2]inte    
[r2]interface e0/0/0
[r2-Ethernet0/0/0]ip ad    
[r2-Ethernet0/0/0]ip address 12.0.0.2 24
[r2-Ethernet0/0/0]
Nov 20 2022 20:31:18-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Ethernet0/0/0 has entered the UP state.
[r2-Ethernet0/0/0]quit
[r2]e0/0/0
Nov 20 2022 20:31:25-08:00 r2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 2, the ch
ange loop count is 0, and the maximum number of records is 4095.
    ^
Error: Unrecognized command found at '^' position.
[r2]inte    
[r2]interface e0/0/1
[r2-Ethernet0/0/1]ip ad    
[r2-Ethernet0/0/1]ip address 23.0.0.1 24
[r2-Ethernet0/0/1]
Nov 20 2022 20:31:45-08:00 r2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface Ethernet0/0/1 has entered the UP state.
[r2-Ethernet0/0/1]
Nov 20 2022 20:31:55-08:00 r2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 3, the ch
ange loop count is 0, and the maximum number of records is 4095.
[r2-Ethernet0/0/1]
<r2> User interface con0 is available

Please Press ENTER.

<r2>sys    
<r2>system-view 
Enter system view, return user view with Ctrl+Z.
[r2]ospf 1
[r2-ospf-1]arae
Nov 20 2022 22:06:36-08:00 r2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 4, the ch
ange loop count is 0, and the maximum number of records is 4095.
           ^
Error: Unrecognized command found at '^' position.
[r2-ospf-1]net    
[r2-ospf-1]net    
[r2-ospf-1]ar    
[r2-ospf-1]area 1
[r2-ospf-1-area-0.0.0.1]
Nov 20 2022 22:09:26-08:00 r2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 5, the ch
ange loop count is 0, and the maximum number of records is 4095.
[r2-ospf-1-area-0.0.0.1]quit
[r2-ospf-1]ar    
[r2-ospf-1]area 0
[r2-ospf-1-area-0.0.0.0]
Nov 20 2022 22:09:36-08:00 r2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 6, the ch
ange loop count is 0, and the maximum number of records is 4095.
[r2-ospf-1-area-0.0.0.0]net    
[r2-ospf-1-area-0.0.0.0]network 0.0.0.0 255.255.255.255
[r2-ospf-1-area-0.0.0.0]
Nov 20 2022 22:09:46-08:00 r2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 7, the ch
ange loop count is 0, and the maximum number of records is 4095.
Nov 20 2022 22:09:47-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=12.0.0.1, NeighborEve
nt=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
Nov 20 2022 22:09:47-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=12.0.0.1, NeighborEve
nt=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
Nov 20 2022 22:09:47-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=12.0.0.1, NeighborEve
nt=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
Nov 20 2022 22:09:47-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=12.0.0.1, NeighborEve
nt=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange
)
Nov 20 2022 22:09:47-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=12.0.0.1, NeighborEve
nt=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)
Nov 20 2022 22:09:47-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=12.0.0.1, NeighborEve
nt=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
Nov 20 2022 22:15:08-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.2, NeighborEve
nt=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
Nov 20 2022 22:15:19-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.2, NeighborEve
nt=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
Nov 20 2022 22:15:19-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.2, NeighborEve
nt=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange
)
Nov 20 2022 22:15:19-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.2, NeighborEve
nt=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)
Nov 20 2022 22:15:19-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.2, NeighborEv
ent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full) User interface con0 is available

Please Press ENTER.

<r2>sy    
<r2>system-view 
Enter system view, return user view with Ctrl+Z.
[r2]int    
[r2]interface e0/0/1
[r2-Ethernet0/0/1]ospf dr
                          ^
Error:Incomplete command found at '^' position.
[r2-Ethernet0/0/1]ospf dr    
[r2-Ethernet0/0/1]ospf dr-priority 0
[r2-Ethernet0/0/1]
Nov 20 2022 22:32:45-08:00 r2 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neigh
bor state changed to Down. (ProcessId=1, NeighborAddress=23.0.0.2, NeighborEvent
=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
Nov 20 2022 22:32:45-08:00 r2 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state le
aves full or changed to Down. (ProcessId=1, NeighborRouterId=23.0.0.2, NeighborA
reaId=0, NeighborInterface=Ethernet0/0/1,NeighborDownImmediate reason=Neighbor D
own Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter Mismatch, 
NeighborChangeTime=2022-11-20 22:32:45-08:00)
Nov 20 2022 22:32:47-08:00 r2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 8, the ch
ange loop count is 0, and the maximum number of records is 4095.
Nov 20 2022 22:32:52-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.2, NeighborEve
nt=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
Nov 20 2022 22:32:52-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.2, NeighborEve
nt=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
Nov 20 2022 22:32:52-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.2, NeighborEve
nt=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
Nov 20 2022 22:32:52-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.2, NeighborEve
nt=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange
)
Nov 20 2022 22:32:52-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.2, NeighborEve
nt=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)
Nov 20 2022 22:32:52-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.2, NeighborEve
nt=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r2-Ethernet0/0/1]quit
[r2]
[r2]di    
[r2]dis    
[r2]display ip     
[r2]display ip-subnet-vlan    
[r2]display ipv6    
[r2]display ip    
[r2]display ipsec    
[r2]display ip-subnet-vlan    
[r2]display ipv6    
[r2]display ip r    
[r2]display ip rou    
[r2]display ip routing-table 
 

<Huawei>sys    
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sy    
[Huawei]sysname r3
[r3]
Nov 20 2022 20:28:17-08:00 r3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 1, the ch
ange loop count is 0, and the maximum number of records is 4095.
[r3]inte    
[r3]interface e0/0/0
[r3-Ethernet0/0/0]ip ad    
[r3-Ethernet0/0/0]ip address 23.0.0.2 24
[r3-Ethernet0/0/0]
Nov 20 2022 20:32:10-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Ethernet0/0/0 has entered the UP state.
[r3-Ethernet0/0/0]quit
[r3]
Nov 20 2022 20:32:17-08:00 r3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 2, the ch
ange loop count is 0, and the maximum number of records is 4095.int
        ^
Error:Incomplete command found at '^' position.
[r3]itn    
[r3]int    
[r3]interface e0/0/1
[r3-Ethernet0/0/1]ip ad    
[r3-Ethernet0/0/1]ip address 34.0.0.1 24
[r3-Ethernet0/0/1]
Nov 20 2022 20:32:38-08:00 r3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface Ethernet0/0/1 has entered the UP state.
[r3-Ethernet0/0/1]
Nov 20 2022 20:32:47-08:00 r3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 3, the ch
ange loop count is 0, and the maximum number of records is 4095.
[r3-Ethernet0/0/1]quit
[r3]
[r3]
<r3> User interface con0 is available

Please Press ENTER.

<r3>sys    
<r3>system-view 
Enter system view, return user view with Ctrl+Z.
[r3]ospf
[r3-ospf-1]a    
[r3-ospf-1]area
Nov 20 2022 22:10:56-08:00 r3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 4, the ch
ange loop count is 0, and the maximum number of records is 4095.
                ^
Error:Incomplete command found at '^' position.
[r3-ospf-1]area 0
[r3-ospf-1-area-0.0.0.0]net    
[r3-ospf-1-area-0.0.0.0]network 0.0.0.0 255.255.25
Nov 20 2022 22:15:07-08:00 r3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 5, the ch
ange loop count is 0, and the maximum number of records is 4095.5.255
[r3-ospf-1-area-0.0.0.0]quit
[r3-ospf-1]area 1
[r3-ospf-1-area-0.0.0.1]n
Nov 20 2022 22:15:17-08:00 r3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 7, the ch
ange loop count is 0, and the maximum number of records is 4095.et
Nov 20 2022 22:15:18-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.1, NeighborEve
nt=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
Nov 20 2022 22:15:18-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.1, NeighborEve
nt=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
Nov 20 2022 22:15:18-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.1, NeighborEve
nt=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)    
[r3-ospf-1-area-0.0.0.1]network 
Nov 20 2022 22:15:19-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.1, NeighborEve
nt=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange
)
Nov 20 2022 22:15:19-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.1, NeighborEve
nt=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)
Nov 20 2022 22:15:19-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.1, NeighborEve
nt=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
                                ^
Error:Incomplete command found at '^' position.
[r3-ospf-1-area-0.0.0.1]net    
[r3-ospf-1-area-0.0.0.1]network 0.0.0.0 255.255.255.255
Error: The specified network command has been occupied by another area or proces
s.
[r3-ospf-1-area-0.0.0.1] User interface con0 is available

Please Press ENTER.

<r3>sys    
<r3>system-view 
Enter system view, return user view with Ctrl+Z.
[r3]ospf
[r3-ospf-1]quit
[r3]intr    
[r3]intr    
[r3]inte    
[r3]interface 
              ^
Error:Incomplete command found at '^' position.
[r3]int    
[r3]interface e0/0/1
[r3-Ethernet0/0/1]ospf dr    
[r3-Ethernet0/0/1]ospf dr-priority 2
[r3-Ethernet0/0/1]
Nov 20 2022 22:30:57-08:00 r3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 8, the ch
ange loop count is 0, and the maximum number of records is 4095.
[r3-Ethernet0/0/1]quit
[r3]dis    
[r3]display o    
[r3]display ospf p    
[r3]display ospf peer 

     OSPF Process 1 with Router ID 23.0.0.2
         Neighbors 

 Area 0.0.0.0 interface 23.0.0.2(Ethernet0/0/0)'s neighbors
 Router ID: 12.0.0.2         Address: 23.0.0.1        
   State: Full  Mode:Nbr is  Slave  Priority: 1
   DR: 23.0.0.1  BDR: 23.0.0.2  MTU: 0    
   Dead timer due in 37  sec 
   Retrans timer interval: 5 
   Neighbor is up for 00:16:19     
   Authentication Sequence: [ 0 ] 

[r3]
Nov 20 2022 22:32:45-08:00 r3 %%01OSPF/3/NBR_DOWN_REASON(l)[0]:Neighbor state le
aves full or changed to Down. (ProcessId=1, NeighborRouterId=12.0.0.2, NeighborA
reaId=0, NeighborInterface=Ethernet0/0/0,NeighborDownImmediate reason=Neighbor D
own Due to 1-Wayhello Received, NeighborDownPrimeReason=1-Wayhello Received, Nei
ghborChangeTime=2022-11-20 22:32:45-08:00)
Nov 20 2022 22:32:45-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.1, NeighborEve
nt=1-Way, NeighborPreviousState=Full, NeighborCurrentState=Init)
[r3]di
Nov 20 2022 22:32:52-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.1, NeighborEve
nt=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)    
[r3]diagnose
Nov 20 2022 22:32:52-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.1, NeighborEve
nt=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange
)
Nov 20 2022 22:32:52-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.1, NeighborEve
nt=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)
Nov 20 2022 22:32:52-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=23.0.0.1, NeighborEve
nt=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
Enter diagnose view, return user view with Ctrl+Z.
[r3-diagnose]quit
[r3]dis    
[r3]display ospf p    
[r3]display ospf peer 

     OSPF Process 1 with Router ID 23.0.0.2
         Neighbors 

 Area 0.0.0.0 interface 23.0.0.2(Ethernet0/0/0)'s neighbors
 Router ID: 12.0.0.2         Address: 23.0.0.1        
   State: Full  Mode:Nbr is  Slave  Priority: 0
   DR: 23.0.0.2  BDR: None   MTU: 0    
   Dead timer due in 36  sec 
   Retrans timer interval: 5 
   Neighbor is up for 00:00:20     
   Authentication Sequence: [ 0 ] 

[r3]
<r3>

<Huawei>
<Huawei>sys    
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sy    
[Huawei]sysname r4
[r4]
Nov 20 2022 20:28:26-08:00 r4 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 1, the ch
ange loop count is 0, and the maximum number of records is 4095.
[r4]
[r4]
[r4]
[r4]sys    
[r4]sysname 
            ^
Error:Incomplete command found at '^' position.
[r4]inter    
[r4]interface loop    
[r4]interface LoopBack 0
[r4-LoopBack0]ip ad    
[r4-LoopBack0]ip address 1.1.1.1
Nov 20 2022 20:45:36-08:00 r4 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 2, the ch
ange loop count is 0, and the maximum number of records is 4095.
                                 ^
Error:Incomplete command found at '^' position.
[r4-LoopBack0]ip ad    
[r4-LoopBack0]ip address 1.1.1.1 24
[r4-LoopBack0]
Nov 20 2022 20:45:46-08:00 r4 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 3, the ch
ange loop count is 0, and the maximum number of records is 4095.
<r4>sys    
<r4>system-view 
Enter system view, return user view with Ctrl+Z.
[r4]inter    
[r4]interface e0/0/0
[r4-Ethernet0/0/0]ip ad    
[r4-Ethernet0/0/0]ip address 78.0.0.2 24
[r4-Ethernet0/0/0]
Nov 20 2022 21:27:14-08:00 r4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Ethernet0/0/0 has entered the UP state.
[r4-Ethernet0/0/0]quit
[r4]int    
[r4]interface e0/0/1
[r4-Ethernet0/0/1]
Nov 20 2022 21:27:24-08:00 r4 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 4, the ch
ange loop count is 0, and the maximum number of records is 4095.ip ad    
[r4-Ethernet0/0/1]ip address 45.0.0.1 24
[r4-Ethernet0/0/1]
Nov 20 2022 21:27:38-08:00 r4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface Ethernet0/0/1 has entered the UP state.
[r4-Ethernet0/0/1]quit
[r4]
Nov 20 2022 21:27:44-08:00 r4 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 5, the ch
ange loop count is 0, and the maximum number of records is 4095.
[r4] User interface con0 is available

Please Press ENTER.

<r4>sy    
<r4>system-view s
                ^
Error:Too many parameters found at '^' position.
<r4>sys    
<r4>system-view 
Enter system view, return user view with Ctrl+Z.
[r4]ospf 1
[r4-ospf-1]area 2
Nov 20 2022 22:16:06-08:00 r4 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 6, the ch
ange loop count is 0, and the maximum number of records is 4095.
[r4-ospf-1-area-0.0.0.2]
Nov 20 2022 22:16:16-08:00 r4 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 7, the ch
ange loop count is 0, and the maximum number of records is 4095.
[r4-ospf-1-area-0.0.0.2]net    
[r4-ospf-1-area-0.0.0.2]network 0.0.0.0 255.255.255.255
[r4-ospf-1-area-0.0.0.2]
Nov 20 2022 22:17:46-08:00 r4 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 8, the ch
ange loop count is 0, and the maximum number of records is 4095.
Nov 20 2022 22:20:26-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=45.0.0.2, NeighborEve
nt=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
Nov 20 2022 22:20:34-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=45.0.0.2, NeighborEve
nt=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
Nov 20 2022 22:20:34-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=45.0.0.2, NeighborEve
nt=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange
)
Nov 20 2022 22:20:34-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=45.0.0.2, NeighborEve
nt=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)
Nov 20 2022 22:20:34-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=45.0.0.2, NeighborEve
nt=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r4-ospf-1-area-0.0.0.2]quit
[r4-ospf-1]quit
[r4]int    
[r4]interface e0/0/0
[r4-Ethernet0/0/0]ospf pr    
[r4-Ethernet0/0/0]ospf p    
[r4-Ethernet0/0/0]ospf p2mp-mask-ignore     
[r4-Ethernet0/0/0]ospf p2mp-mask-ignore     
[r4-Ethernet0/0/0]ospf p2mp-mask-ignore     
[r4-Ethernet0/0/0]ospf dr     
[r4-Ethernet0/0/0]ospf dr-priority 0
[r4-Ethernet0/0/0]
 

<Huawei>sys    
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sys    
[Huawei]sysname r5
[r5]
Nov 20 2022 20:28:36-08:00 r5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 1, the ch
ange loop count is 0, and the maximum number of records is 4095.
[r5]
[r5]
[r5]
<r5>sy    
<r5>system-view 
Enter system view, return user view with Ctrl+Z.
[r5]int    
[r5]interface e0/0/1
[r5-Ethernet0/0/1]inter    
[r5-Ethernet0/0/1]ipa     
[r5-Ethernet0/0/1]ip ad    
[r5-Ethernet0/0/1]ip address 45.0.0.2 24
[r5-Ethernet0/0/1]
Nov 20 2022 21:28:24-08:00 r5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Ethernet0/0/1 has entered the UP state.
Nov 20 2022 21:28:25-08:00 r5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 2, the ch
ange loop count is 0, and the maximum number of records is 4095.
[r5-Ethernet0/0/1]quit
[r5]int    
[r5]interface e0/0/0
[r5-Ethernet0/0/0]ip ad    
[r5-Ethernet0/0/0]ip address 89.0.0.2
                                      ^
Error:Incomplete command found at '^' position.
[r5-Ethernet0/0/0]
[r5-Ethernet0/0/0]ipa d    
[r5-Ethernet0/0/0]ip ad    
[r5-Ethernet0/0/0]ip address 89.0.0.2 24
[r5-Ethernet0/0/0]
Nov 20 2022 21:29:12-08:00 r5 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface Ethernet0/0/0 has entered the UP state.
[r5-Ethernet0/0/0]
Nov 20 2022 21:29:15-08:00 r5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 3, the ch
ange loop count is 0, and the maximum number of records is 4095.
[r5-Ethernet0/0/0]quit
[r5]int    
[r5]interface g0/0/0
[r5-GigabitEthernet0/0/0]ipa d    
[r5-GigabitEthernet0/0/0]ip ad    
[r5-GigabitEthernet0/0/0]ip address 56.0.0.1 24
[r5-GigabitEthernet0/0/0]
Nov 20 2022 21:29:43-08:00 r5 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r5-GigabitEthernet0/0/0]quit
Nov 20 2022 21:29:45-08:00 r5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 4, the ch
ange loop count is 0, and the maximum number of records is 4095.
[r5] User interface con0 is available

Please Press ENTER.

<r5>sy    
<r5>system-view 
Enter system view, return user view with Ctrl+Z.
[r5]ospf
[r5-ospf-1]arae 2
           ^
Error: Unrecognized command found at '^' position.
[r5-ospf-1]
Nov 20 2022 22:18:17-08:00 r5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 5, the ch
ange loop count is 0, and the maximum number of records is 4095.
[r5-ospf-1]arae    
[r5-ospf-1]araa 2
           ^
Error: Unrecognized command found at '^' position.
[r5-ospf-1]a    
[r5-ospf-1]area 2
[r5-ospf-1-area-0.0.0.2]
Nov 20 2022 22:19:37-08:00 r5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 6, the ch
ange loop count is 0, and the maximum number of records is 4095.
[r5-ospf-1-area-0.0.0.2]net    
[r5-ospf-1-area-0.0.0.2]network 0.0.0.0 255.255.255.255
[r5-ospf-1-area-0.0.0.2]
Nov 20 2022 22:20:27-08:00 r5 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 7, the ch
ange loop count is 0, and the maximum number of records is 4095.
Nov 20 2022 22:20:34-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=45.0.0.1, NeighborEve
nt=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
Nov 20 2022 22:20:34-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=45.0.0.1, NeighborEve
nt=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
Nov 20 2022 22:20:34-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=45.0.0.1, NeighborEve
nt=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
Nov 20 2022 22:20:34-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=45.0.0.1, NeighborEve
nt=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange
)
Nov 20 2022 22:20:34-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=45.0.0.1, NeighborEve
nt=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)
Nov 20 2022 22:20:34-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=45.0.0.1, NeighborEve
nt=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
Nov 20 2022 22:21:02-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=56.0.0.2, NeighborEve
nt=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
Nov 20 2022 22:21:05-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=56.0.0.2, NeighborEve
nt=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
Nov 20 2022 22:21:05-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=56.0.0.2, NeighborEve
nt=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange
)
Nov 20 2022 22:21:05-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=56.0.0.2, NeighborEve
nt=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)
Nov 20 2022 22:21:05-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=1, NeighborAddress=56.0.0.2, NeighborEv
ent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r5-ospf-1-area-0.0.0.2]quit
[r5-ospf-1]quit
[r5]int    
[r5]interface e0/0/0
[r5-Ethernet0/0/0]ospf dr     
[r5-Ethernet0/0/0]ospf dr-priority 0
[r5-Ethernet0/0/0]
 

<Huawei>sys    
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]r6
        ^
Error: Unrecognized command found at '^' position.
[Huawei]
[Huawei]sys    
[Huawei]sysname r6
[r6]
[r6]
[r6]
[r6]
<r6>syy    
<r6>syy
    ^
Error: Unrecognized command found at '^' position.
<r6>sy    
<r6>system-view 
Enter system view, return user view with Ctrl+Z.
[r6]inte    
[r6]interface e0/0/0
[r6-Ethernet0/0/0]ip ad    
[r6-Ethernet0/0/0]ip address 67.0.0.2 24
[r6-Ethernet0/0/0]
Nov 20 2022 21:30:07-08:00 r6 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Ethernet0/0/0 has entered the UP state.
[r6-Ethernet0/0/0]quit
[r6]int
Nov 20 2022 21:30:14-08:00 r6 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 2, the ch
ange loop count is 0, and the maximum number of records is 4095.
        ^
Error:Incomplete command found at '^' position.
[r6]int    
[r6]interface e/0/0/1
              ^
Error: Wrong parameter found at '^' position.
[r6]int    
[r6]interface e0/0/1
[r6-Ethernet0/0/1]ip ad    
[r6-Ethernet0/0/1]ip address 56.0.0.2 24
[r6-Ethernet0/0/1]
Nov 20 2022 21:30:39-08:00 r6 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface Ethernet0/0/1 has entered the UP state.
[r6-Ethernet0/0/1]
Nov 20 2022 21:30:45-08:00 r6 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 3, the ch
ange loop count is 0, and the maximum number of records is 4095. User interface con0 is available

Please Press ENTER.

<r6>sy    
<r6>system-view s
                ^
Error:Too many parameters found at '^' position.
<r6>sy    
<r6>system-view 
Enter system view, return user view with Ctrl+Z.
[r6]ospf 1
[r6-ospf-1]arae 2
           ^
Error: Unrecognized command found at '^' position.
[r6-ospf-1]a     
[r6-ospf-1]area 2
[r6-ospf-1-area-0.0.0.2]net    
[r6-ospf-1-area-0.0.0.2]network 
Nov 20 2022 22:20:57-08:00 r6 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 5, the ch
ange loop count is 0, and the maximum number of records is 4095.0.0.0.0 255.255.
255.255
[r6-ospf-1-area-0.0.0.2]
Nov 20 2022 22:21:05-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=56.0.0.1, NeighborEve
nt=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
Nov 20 2022 22:21:05-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=56.0.0.1, NeighborEve
nt=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
Nov 20 2022 22:21:05-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=56.0.0.1, NeighborEve
nt=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
Nov 20 2022 22:21:05-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=56.0.0.1, NeighborEve
nt=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchange
)
Nov 20 2022 22:21:05-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=56.0.0.1, NeighborEve
nt=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)
Nov 20 2022 22:21:05-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=1, NeighborAddress=56.0.0.1, NeighborEve
nt=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r6-ospf-1-area-0.0.0.2]
Nov 20 2022 22:21:07-08:00 r6 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 6, the ch
ange loop count is 0, and the maximum number of records is 4095.
[r6-ospf-1-area-0.0.0.2]quit
[r6-ospf-1]quit
[r6]int    
[r6]interface e0/0/0
[r6-Ethernet0/0/0]ospf  dr    
[r6-Ethernet0/0/0]ospf  dr-priority 0
[r6-Ethernet0/0/0]