交换机端口聚合

交换机端口聚合，可实现交换机之间的链路具有较高的带宽和可靠性，并在交换机之间实现数据流量的负载分担。
相关命令：

1. 创建Eth-Trunk
   system-view
   [Quidway] sysname S-switch-A
   [S-switch-A] interface eth-trunk 1
   [S-switch-A-Eth-Trunk1] quit
2. 配置交换机A上的eth-trunk 1
   [S-switch-A] interface eth-trunk 1
   [S-switch-A-Eth-Trunk1]port link-type trunk
   [S-switch-A-Eth-Trunk1]port trunk allow-pass vlan all
   [S-switch-A-Eth-Trunk1]quit
3. 加入Eth-Trunk 的成员接口
   [S-switch-A] interface Ethernet0/0/1
   [S-switch-A-Ethernet0/0/1]undo port default vlan
   [S-switch-A-Ethernet0/0/1]undo ntdp enable
   ntdp “邻居拓扑发现协议”
   [S-switch-A-Ethernet0/0/1]undo ndp enable
   ndp “邻居发现协议”
   [S-switch-A-Ethernet0/0/1]bpdu disable
   bpdu “网桥协议数据单元”
   [S-switch-A-Ethernet0/0/1]eth-trunk 1
   需要几分钟
   [S-switch-A-Ethernet0/0/1] quit
   [S-switch-A] interface Ethernet0/0/2
   [S-switch-A-Ethernet0/0/2]undo port default vlan
   [S-switch-A-Ethernet0/0/2]undo ntdp enable
   [S-switch-A-Ethernet0/0/2]undo ndp enable
   [S-switch-A-Ethernet0/0/2]bpdu disable
   [S-switch-A-Ethernet0/0/2] eth-trunk 1
   [S-switch-A-Ethernet0/0/2] quit
   [S-switch-A] interface Ethernet0/0/3
   [S-switch-A-Ethernet0/0/3]undo port default vlan
   [S-switch-A-Ethernet0/0/3]undo ntdp enable
   ntdp
   [S-switch-A-Ethernet0/0/3]undo ndp enable
   [S-switch-A-Ethernet0/0/3]bpdu disable
   [S-switch-A-Ethernet0/0/3] eth-trunk 1
   [S-switch-A-Ethernet0/0/3] quit
   实验拓扑如下：