Carving machine users have the same feeling, carving machine used for a long time will generate heat, at this time, the motor is too hot will cause some negative effects, we should consider how to heat.When the temperature of stone carving mechanical and electrical machine is too high, you can choose to stop the machine to rest for a period of time, continue to work, you can also add heat radiation in the motor, to ensure the timely emission of heat.
The following to introduce some heat dissipation tips: electrical heating temperature range depends on the carving of electrical machinery insulation.General internal insulation at high temperature (130 degrees) will be destroyed.The motor will not be damaged as long as it does not exceed 130 degrees, but at this time, the surface temperature is below 90 degrees. Therefore, the motor surface temperature at 70-80 degrees is normal. Simple point-of-temperature thermometers are useful, and you can be pretty sure: 1-2 seconds for hands, no more than 60 degrees, and only hands, about 70 or 80 degrees; A few drops of water quickly vaporizes, so 90 degrees.
Engraving machine heat dissipation is also very important, commonly used passive heat dissipation and air-cooled heat dissipation. For the machine of low power, can use passive heat dissipation to solve. Taking advantage of the temperature difference between the environment and the equipment, while cooling naturally, is simpler and cheaper. Suitable for low power, short time working equipment heat dissipation.
Air-cooled heat dissipation is more extensive, most are also used in this way. Air-cooled heat dissipation USES the fan to blow away the heat, so as to rapidly dissipate heat. But air cooling also has many disadvantages. Like the long hours, the noise is really loud. And easy accumulation of dust, resulting in poor cooling effect.
Water cooling is to add a heat absorption head on the surface of the heating core, which can flow through the water, thus carrying away heat to achieve cooling effect. Or an external water-cooling device that works the same way. The disadvantage of water cooling is its high cost. The advantage is that its heat dissipation effect is quite good, and will not be disturbed by dust.
With the increase of high power engraving machine, heat dissipation problem has become increasingly severe, water cooling heat dissipation as a new trend in the field of heat dissipation, will play an increasingly large role.