51单片机 IIC OLED显示图片

最新推荐文章于 2024-05-11 13:26:09 发布
最新推荐文章于 2024-05-11 13:26:09 发布
阅读量4k 收藏 95
点赞数 18
分类专栏： 51单片机 文章标签： 单片机
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/weixin_45879252/article/details/105825973
版权

51单片机 IIC OLED

显示动态图片
新手上路，欢迎大家交流学习，尽量持续更新。
main.c文件

/*******************************************************************************
* 
*******************************************************************************/

#include <reg52.h>
#include "iic.h"
#include "oled.h"

/*******************************************************************************
* 函 数 名         : Delay_1ms(unsigned int Del_1ms)
* 函数功能		   : 1ms延时函数
* 输    入         : Del_1ms
* 输    出         : 无
*******************************************************************************/

void Delay_1ms(unsigned int Del_1ms)		//T = 1ms * Del_1ms
{
	unsigned char j;
	while(Del_1ms--)
	{	
		for(j=0;j<123;j++);
	}
}

/***********************Picture Code*******************************/
unsigned char code BMP1[] =
{//熊猫人合掌
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x80,0xC0,0xC0,0xE0,0xE0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xE0,0xE0,0xC0,0xC0,
0x80,0x80,0x80,0x80,0x80,0x80,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,
0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x80,0x80,0x80,0x00,0x00,
0x00,0x80,0x80,0x80,0x80,0xC0,0xC0,0xC0,0xC0,0x80,0x80,0x80,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7C,
0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0x3F,0x1F,
0x0F,0x07,0x03,0x03,0x01,0x01,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x03,0x03,0x07,0x07,
0x0F,0x1F,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFC,
0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x03,0x07,0x0F,0x1F,0x1F,0xBF,0xFF,0xFF,0x7F,0x0F,0x03,0x01,0x00,0x00,0xF0,0xF8,
0xF8,0xF0,0xF0,0xE0,0xF0,0xF0,0xF8,0xF8,0xF8,0xF8,0xF8,0xF8,0xF8,0xF8,0xF8,0xF0,
0xF0,0xF0,0xF0,0xF0,0xE0,0xF0,0xF8,0xFC,0xFC,0xFC,0xFC,0xF8,0xF8,0xF8,0xF8,0xF8,
0xF8,0xF8,0xF8,0x70,0x01,0x03,0x0F,0x7F,0xFF,0xFF,0xFF,0x7F,0x7F,0x3F,0x1F,0x0F,
0x07,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x80,0x80,0x80,0xF8,0xFE,0xFF,0xE7,0xF0,0xF0,0xF8,0xF8,0xFC,0xFC,0xFC,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0x7F,0xBF,0x8F,0xE7,0xE6,
0xF7,0x77,0x7F,0x7B,0x61,0x4F,0x9F,0x7F,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFC,0xFC,0xFC,0xF8,0xF0,0xF1,0xFF,0xFF,0xF0,0x80,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0xFE,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0x7F,0x3F,0x0F,0x37,0x1F,0xFF,0xFF,0xEF,0xEF,0xE7,0xEB,0xEB,
0xE9,0xE7,0xE7,0xE7,0xEF,0xDF,0xCE,0xCE,0xCE,0xCE,0xEF,0xDF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xDF,0xC3,0xC0,0xC0,0xC0,0x80,0x80,0x80,0x81,0x03,0x03,0x0F,0x0E,0x0E,0x8E,
0x9E,0x9E,0x9E,0x9E,0x9C,0x9C,0x9C,0x9C,0x9C,0x9C,0xDC,0xCC,0xC0,0xC0,0xE3,0xE7,
0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x07,0x07,0x07,
0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,
0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,
0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,
0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};

unsigned char code BMP2[] =
{
	//熊猫人开掌
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x80,0x80,0x80,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x80,
0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x80,0x80,0xC0,0xC0,0xC0,0xC0,0xC0,0x80,0x80,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0x1F,
0x1F,0x0F,0x07,0x07,0x03,0x03,0x01,0x01,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x03,0x03,0x07,0x07,0x07,
0x0E,0x0E,0x1F,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,
0xFC,0xF8,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0xE0,0xE0,0xF0,0xF0,0xF0,0xF0,0xE0,0xC0,0x80,0xC0,0xC0,0xC0,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x01,0x07,0x0F,0x1F,0x3F,0xBF,0xFF,0xFF,0xFF,0x3F,0x0F,0x07,0x03,0x01,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0xE0,0xE0,0xF0,0xF0,0xF0,0xF0,0xF0,0x70,
0x70,0x70,0xF0,0xE0,0xE0,0xC0,0x00,0x00,0xC0,0xE0,0xE0,0xE0,0xF0,0xF0,0xF0,0x70,
0x70,0xF0,0xF0,0xF0,0xC1,0x01,0x07,0x1F,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0x3F,
0x3F,0x0F,0x07,0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0xC0,0x80,0x80,0xE0,0xF0,0xF0,
0xF0,0xF0,0xF0,0xE0,0xE0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xF8,0xF0,0xF0,0xE0,0xC0,0xC0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0xC0,0xF8,0xFE,0xFF,0x3F,0x07,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x03,0x03,0x03,0x07,0x07,0x07,0x86,
0xC6,0xC6,0x07,0x07,0x07,0x01,0x00,0x00,0x01,0x03,0x07,0x07,0x07,0x07,0x07,0x06,
0x06,0x03,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x7F,0xFF,0xFF,0xE0,0x00,0x00,
0x00,0x80,0x80,0xC0,0xE0,0xE0,0xF0,0xF0,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0x3F,0x1E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x0F,0x1F,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFE,0xFE,
0xFE,0xFF,0xFF,0xFF,0xFF,0xF3,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x3C,0x7E,0xFF,0xEF,0xCF,0xC3,
0xC3,0xC1,0xC2,0xC6,0xCE,0xDE,0xDE,0xDE,0xDE,0xDE,0xDE,0xC6,0xC2,0xC0,0xCF,0x3F,
0x1F,0x0F,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0xFF,0xFF,0xFF,0xFE,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0x3F,
0x1F,0x0F,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x07,0x0F,0x1F,
0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFC,0xF8,0xF8,0xF0,0xE0,0xE0,
0xC0,0xC0,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x01,0x01,0x03,0x03,
0x07,0x0F,0x0F,0x1D,0x1D,0x39,0x39,0x39,0xB9,0xB9,0xB9,0xB9,0x99,0x99,0x99,0xDF,
0xCF,0xC6,0xE0,0xE0,0xE0,0xF0,0xF0,0xF8,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x3F,0x1F,0x0F,0x03,0x01,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x01,0x03,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,
0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,
0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x06,0x07,0x07,0x07,
0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,
0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,0x07,
0x07,0x07,0x07,0x07,0x07,0x07,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};
/*******************************************************************************
* 函 数 名         : main
* 函数功能		   : 主函数
* 输    入         : 无
* 输    出         : 无
*******************************************************************************/
void main(void)
{
	OLED_Init();
	Delay_1ms(5);
	while(1)
	{
		OLED_DrawBMP(0,0,128,8,(unsigned char *)BMP1);//熊猫人合掌
		Delay_1ms(150);
		OLED_DrawBMP(0,0,128,8,(unsigned char *)BMP2);//熊猫人开掌
		Delay_1ms(150);
//		Delay_1ms(200);
	}
}

oled.c文件

#include "oled.h"
/*******************************************************************************
* 函 数 名         : OLED_Init()
* 函数功能		   : OLED初始化函数
* 输    入         : 无
* 输    出         : 无
*******************************************************************************/
void OLED_Init()
{
	Write_IIC_Command(0xAE);//display off
	Write_IIC_Command(0x20);//Set Memory Addressing Mode	
	Write_IIC_Command(0x10);//00,Horizontal Addressing Mode;01,Vertical Addressing Mode;10,Page Addressing Mode (RESET);11,Invalid
	Write_IIC_Command(0xb0);//Set Page Start Address for Page Addressing Mode,0-7
	Write_IIC_Command(0xc8);//Set COM Output Scan Direction
	Write_IIC_Command(0x00);//---set low column address
	Write_IIC_Command(0x10);//---set high column address
	Write_IIC_Command(0x40);//--set start line address
	Write_IIC_Command(0x81);//--set contrast control register
	Write_IIC_Command(0xff);//亮度调节 0x00~0xff
	Write_IIC_Command(0xa1);//--set segment re-map 0 to 127
	Write_IIC_Command(0xa6);//--set normal display
	Write_IIC_Command(0xa8);//--set multiplex ratio(1 to 64)
	Write_IIC_Command(0x3F);//
	Write_IIC_Command(0xa4);//0xa4,Output follows RAM content;0xa5,Output ignores RAM content
	Write_IIC_Command(0xd3);//-set display offset
	Write_IIC_Command(0x00);//-not offset
	Write_IIC_Command(0xd5);//--set display clock divide ratio/oscillator frequency
	Write_IIC_Command(0xf0);//--set divide ratio
	Write_IIC_Command(0xd9);//--set pre-charge period
	Write_IIC_Command(0x22);//
	Write_IIC_Command(0xda);//--set com pins hardware configuration
	Write_IIC_Command(0x12);
	Write_IIC_Command(0xdb);//--set vcomh
	Write_IIC_Command(0x20);//0x20,0.77xVcc
	Write_IIC_Command(0x8d);//--set DC-DC enable
	Write_IIC_Command(0x14);//
	Write_IIC_Command(0xaf);//--turn on oled panel 
}
/*******************************************************************************
* 函 数 名         : OLED_SetPos(unsigned char x, unsigned char y)
* 函数功能		   : 设置起始点坐标
* 输    入         : 起始点坐标
* 输    出         : 无
*******************************************************************************/
void OLED_SetPos(unsigned char x, unsigned char y)
{ 
	Write_IIC_Command(0xb0+x);
	Write_IIC_Command((y&0x0f)|0x00);//LOW
	Write_IIC_Command(((y&0xf0)>>4)|0x10);//HIGHT
}
/*******************************************************************************
* 函 数 名         : OLED_DrawBMP(unsigned char x0,unsigned char y0,unsigned char x1,unsigned char y1,unsigned char BMP[])
* 函数功能		   : BMP位图函数
* 输    入         : x0,y0 -- 起始点坐标(x0:0~127, y0:0~7); x1,y1 -- 起点对角线(结束点)的坐标(x1:1~128,y1:1~8)
* 输    出         : 无
*******************************************************************************/
void OLED_DrawBMP(unsigned char x0,unsigned char y0,unsigned char x1,unsigned char y1,unsigned char BMP[])
{
	unsigned int j=0;
	unsigned char x,y;
	if(y1%8==0)
		y = y1/8;
	else
		y = y1/8 + 1;
	for(y=y0;y<y1;y++)
	{
		//OLED_SetPos(x0,y);
		OLED_SetPos(y,x0);
		for(x=x0;x<x1;x++)
		{
			Write_IIC_Data(BMP[j++]);
		}
	}
}

iic.c文件

#include "iic.h"
#include "intrins.h"
/**********************************************
//IIC Start
**********************************************/
/*******************************************************************************
* 函 数 名         : IIC_Start()
* 函数功能		   : IIC停止函数
* 输    入         : 无
* 输    出         : 无
*******************************************************************************/
void IIC_Start()
{
	SCL = 1;		
	SDA = 1;
	_nop_();
	SDA = 0;
	_nop_();
	SCL = 0;
}

/**********************************************
//IIC Stop
**********************************************/
/*******************************************************************************
* 函 数 名         : IIC_Stop()
* 函数功能		   : IIC停止函数
* 输    入         : 无
* 输    出         : 无
*******************************************************************************/
void IIC_Stop()
{
	SCL = 0;
	SDA = 0;
	_nop_();
	SCL = 1;
	SDA = 1;
	_nop_();
}
/*******************************************************************************
* 函 数 名         : Write_IIC_Byte(unsigned char IIC_Byte)
* 函数功能		   : IIC写入字节函数
* 输    入         : IIC_Byte
* 输    出         : 无
*******************************************************************************/
void Write_IIC_Byte(unsigned char IIC_Byte)
{
	unsigned char i;
	for(i=0;i<8;i++)		
	{
		if(IIC_Byte & 0x80)
			SDA=1;
		else
			SDA=0;
		SCL=1;
		_nop_();
		SCL=0;
		_nop_();
		IIC_Byte<<=1;
		_nop_();
	}
	SDA=1;
	SCL=1;
	_nop_();
	SCL=0;
	_nop_();
}
/*******************************************************************************
* 函 数 名         : Write_IIC_Command(unsigned char IIC_Command)
* 函数功能		   : IIC写命令函数
* 输    入         : IIC_Command
* 输    出         : 无
*******************************************************************************/
void Write_IIC_Command(unsigned char IIC_Command)
{
   IIC_Start();
   Write_IIC_Byte(0x78);            //从属地址,SA0=0
   Write_IIC_Byte(0x00);			//写入命令
   Write_IIC_Byte(IIC_Command); 
   IIC_Stop();
}
/*******************************************************************************
* 函 数 名         : Write_IIC_Data(unsigned char IIC_Data)
* 函数功能		   : IIC写数据函数
* 输    入         : IIC_Data
* 输    出         : 无
*******************************************************************************/
void Write_IIC_Data(unsigned char IIC_Data)
{
   IIC_Start();
   Write_IIC_Byte(0x78);			
   Write_IIC_Byte(0x40);			//写入数据
   Write_IIC_Byte(IIC_Data);
   IIC_Stop();
}

oled.h文件

#ifndef __OLED_H
#define __OLED_H

#include "iic.h"

void OLED_Init();
void OLED_SetPos(unsigned char x, unsigned char y);
void OLED_DrawBMP(unsigned char x0,unsigned char y0,unsigned char x1,unsigned char y1,unsigned char BMP[]);


#endif

iic.h文件

#ifndef __IIC_H
#define __IIC_H

#include <reg52.h>  //声明特殊功能寄存器

/*************Pin Define***************/
sbit SCL=P1^0;
sbit SDA=P1^1;

void IIC_Start();
void IIC_Stop();
void Write_IIC_Command(unsigned char IIC_Command);
void Write_IIC_Data(unsigned char IIC_Data);
void Write_IIC_Byte(unsigned char IIC_Byte);

#endif
不是老道
关注
  • 18
    点赞
  • 踩
  • 95
    收藏
    觉得还不错? 一键收藏
  • 11
    评论
专栏目录
STC51 单片机+1.3“ IIC SH1106基本图形功能显示示例
perseverance51博客
09-23 1151
STC51 单片机+1.3“ IIC SH1106基本图形功能显示示例
OLED 屏幕显示
hltx666的博客
02-05 5542
实验描述: ALIENTEK OLED模块的控制器是SSD1306，本章，通过STM32来控制该模块显示字符和数字。代码通过SPI与OLED 屏幕相连 OLED 简介: OLED，即有机发光二极管（OrganicLight-EmittingDiode），又称为有机电激光显示（OrganicElectroluminesenceDisplay，OELD）。OLED由于同时具备自发光，不需背光源、对比度...
基于51单片机的函数/波形信号发生器
Donglutao的博客
04-11 1409
基于51单片机的函数信号发生器/波形发生器
使用单片机驱动tftlcd显示图片
wywwdxf的博客
05-11 281
tftlcd显示图片以及文字在嵌入式交互设计中是基础的操作，更深一层次从使用希望读者可以尝试lvgl、touchgfx等高级界面库。另外对内存有限的mcu来说，还是使用基础的图像绘制、文字绘制在系统维护层面性价比更高
【强烈推荐】基于stm32的OLED各种显示实现（含动态图）
热门推荐
black_sneak的博客
06-23 4万+
手把手教你彻底搞懂基于stm32的OLED的使用，教程中包含各种API函数的使用。满足几乎所有OLED显示的需要。文章末尾附带源码，强烈推荐！！！
（实验12）单片机，STM32F4学习笔记，代码讲解【OLED显示实验】【正点原子】【原创】
本不平凡
04-04 4121
（实验12）单片机，STM32F4学习笔记，代码讲解【OLED显示实验】【正点原子】【原创】
51单片机OLED显示模块程序，IIC协议
04-26
以中景园电子科技的IIC应答例程为基础修改而成。包括ASCII字符显示、字符串显示、数字显示、汉字显示...目前在STC15W408AS+0.96寸OLED显示系统测试通过，如需移植请自行修改延时函数和软件模拟IIC用到的那两个IO口定义
51单片机STC98C52RC点亮OLED显示屏源代码
05-11
在本文中，我们将深入探讨如何使用51单片机STC98C52RC来点亮OLED显示屏，并通过源代码实现这一功能。51单片机是微控制器领域广泛应用的一种型号，尤其适合初学者和专业开发者的入门项目。STC98C52RC是该系列中的一个...
51单片机+IIC通信+0.96oled显示屏源码
最新发布
05-22
在这个项目中，我们将深入探讨如何使用51单片机通过IIC（Inter-Integrated Circuit）通信协议与0.96英寸的OLED（有机发光二极管）显示屏进行通信，从而实现数据显示。 IIC协议是一种多主控、二线制的通信协议，由...
stc51单片机驱动OLED 屏幕程序
04-24
STC51单片机通过控制数据线和时钟线向OLED屏幕发送指令和显示数据，以控制每个像素的亮度，进而显示图像。常见的OLED驱动芯片如SSD1306或SH1106，它们提供了串行接口，可以与STC51进行通信。 在Keil4环境下，我们...
OLED_oled51单片机_OLEDiic控制程序_oled驱动iic_IIC_bakoledscreen_
09-30
在电子工程领域，尤其是嵌入式系统...开发者只需理解OLED的基本工作原理、51单片机的IIC通信机制，以及如何调用提供的库函数，就可以在自己的项目中集成并显示数据。这个驱动程序大大简化了开发流程，提高了开发效率。
51单片机驱动oled显示屏代码
04-23
使用51单片机驱动oled显示屏，提供字符串显示和浮点数显示函数，提供主函数供参考调用方法。
单片机采用RLE算法实现液晶屏显示图片
面朝大海春暖花开
11-29 3327
由于需要用到液晶屏（320*240）显示图片，而且图片的数量比较多（好几百张），并且图片要求保存到16M的SPI FLASH里面，显然如果不处理 16M的FLASH明显是放不下去。后来同事说可以用压缩算法RLE，并且用C#给我做了个小的软件，压缩图片得到RLE压缩后的数据。 点击打开链接  ---------- 详细的RLE算法可以参考次连接http://blog.csdn.net/orbit/
IIC驱动0.96寸OLED屏幕显示（51单片机）
m0_58832575的博客
04-07 1万+
IIC驱动OlED
51单片机移植0.96寸OLED显示 亲测可用
Rookie Linux的博客
11-04 2万+
废话不多说 先上图片 一下便是我的代码 LCD头文件 LCD源文件 由于51单片机内存限制，一些大的数组不能装载，所以采用8*16字符串显示，汉字取模软件学习单片机都会带，我就不发了，具体使用的时候就是将LCD头文件与源文件添加到你的51工程，main函数调用LCD的初始化函数，然后即可调用一些基本的显示函数了。 ...
单片机显示方案-OLED
l420ll的博客
12-11 1万+
显示方案在单片机项目中往往能够使整个项目锦上添花，仿佛打开了单片机“心灵”的窗户，此次给大家介绍OLED显示方案。OLED的特点： 就我而言对OLED感觉现在能买到便宜的OLED显示屏，0.96寸或者0.91寸的128×64，128×32，无论白色还是蓝色最大特点就是自发光，炫酷显示，高分辨率，低温工作环境。上图：非常炫酷 OLED显示方案： 市面上OLED有好
51单片机控制0.96寸OLED（IIC接口）
ppptalk的博客
01-28 4万+
1. OLED初步认识OLED(Organic Light-Emitting Diode)，即有机发光二极管. OLED由于同时具备自发光，不需背光源，对比度高，厚度薄，视角广，反应速度快，可用于挠曲性面板，使用温度范围广，构造及制程简单等优异特性，被认为是下一代的平面显示器新兴应用技术。具有轻，薄，省电等特性，通信接口简单.这里我们描述的是IIC接口的0.96寸OLED，其实对于其他接口的OLE...
89C51使用0.96 OLED显示屏
青烨慕容
09-05 6697
89C51使用0.96 OLED显示屏1、电路原理2、代码2.1、关于字体图片取模3、显示效果4、下载链接   好长时间都没有使用51了，因为一些莫名的原因看了看51，瞬间感觉不忘初心啊，还是熟悉味道。这次是使用7脚OLED显示屏。因为51可以使用Proteus软件进行仿真，所以最后我会附上仿真和代码。   51单片机使用的LCD1602的显示屏相对来说是比较多的，需要LCD1602的可以看我这篇博客 https://blog.csdn.net/weixin_45488643/article/details
基于IIC接口的OLED数据显示
qq_45189556的博客
12-28 1264
目录使用STM32F103的IIC接口实现以下功能：1. 显示自己的学号和姓名；2. 显示AHT20的温度和湿度；3. 上下或左右的滑动显示长字符。 使用STM32F103的IIC接口实现以下功能： 1. 显示自己的学号和姓名； 1.1 资料下载 链接: link. 1.2 解压后，打开图示路径的keil文件： 1.3 打开取模软件，设置为下图所示： 1.4 生成自己想要生成的字 1.5 修改代码 1）编译程序，然后打开oledfont.h文件进行如下修改（把生成的字模复制粘贴过去）： 2）把主函数
基于51单片机iic协议oled代码
01-22
51单片机iic协议oled代码可以通过以下步骤实现： 1. 首先，我们需要包含51单片机的头文件和对应的引脚定义，以便于程序中使用。 ```c #include <reg52.h> sbit SCL=P2^1; // 定义SCL引脚 sbit SDA=P2^0; // 定义SDA引脚 ``` 2. 然后，我们需要定义iic协议中的起始条件、停止条件和数据传输函数。 ```c void iic_start() // IIC起始条件 { SDA=1; SCL=1; Delay5us(); SDA=0; Delay5us(); SCL=0; } void iic_stop() // IIC停止条件 { SDA=0; Delay5us(); SCL=1; Delay5us(); SDA=1; } void iic_writebyte(unsigned char dat) // 写一个字节 { unsigned char i; for(i=0;i<8;i++) { SDA=(bit)(dat&0x80); dat<<=1; SCL=1; Delay5us(); // 调整延时时间，保证IIC操作正常 SCL=0; } SDA=1; SCL=1; Delay5us(); SCL=0; } ``` 3. 最后，我们可以示范如何使用iic协议与oled屏幕进行通信，并将需要显示的内容写入oled屏幕的数据寄存器。 ```c void oled_write_cmd(unsigned char cmd) // 向OLED写控制命令 { iic_start(); iic_writebyte(0x78); // OLED I2C Write address iic_writebyte(0x00); // Control byte: Co = 0, D/C# (bit0 write command) iic_writebyte(cmd); // Write command iic_stop(); } void oled_write_data(unsigned char dat) // 向OLED写数据 { iic_start(); iic_writebyte(0x78); // OLED I2C Write address iic_writebyte(0x40); // Control byte: Co = 0, D/C# (bit0 write data) iic_writebyte(dat); // Write data iic_stop(); } ``` 通过以上代码，我们可以实现51单片机基于iic协议控制oled屏幕的显示，从而实现各种图形和文本的显示效果。

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论 11
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值