一个实验教你搞定DHCP中继的配置

一、实验环境：

下面拓扑图实现全网互通

二、实验步骤：

1、分析：
配置SW1:
将e0/0/1,e0/0/2,e0/0/3,e0/0/4配置access口的vlan10和20口，将g0/0/1配置trunk口的vlan10 20
vlan batch 10 20
int e0/0/1
port link-type access
port default vlan 10
undo shutdown
int e0/0/2
port link-type access
port default vlan 10
undo shutdown
int e0/0/3
port link-type access
port default vlan 10
undo shutdown
int e0/0/4
port link-type access
port default vlan 20
undo shutdown
int g0/0/1
port link-type trunk
port trunk allow-pass vlan 20
undo shutdown
配置R1：
将g0/0/0,g0/0/2配置图上给的地址，接下来在g0/0/1的子接口中配置dhcp模式，并配置连接的路由表
int g0/0/0
ip add 12.0.0.1 24
int g0/0/2
ip add 14.0.0.2 24
dhcp enable
int g0/0/1.10
dot1q termination vid 10
ip add 192.168.10.1 24
arp broadcast enable
dhcp select relay
dhcp relay server-ip 14.0.0.2
int g0/0/1.20
dot1q termination vid 20
ip add 192.168.20.1 24
arp broadcast enable
dhcp select relay
dhcp relay server-ip 14.0.0.2
ip route-static 0.0.0.0 0.0.0.0 12.0.0.2
配置R2：
将g0/0/0配置地址，g0/0/1配置dhcp模式，并配置连接的路由表
int g0/0/0
ip add 12.0.0.2 24
dhcp enable
int g0/0/1
ip add 15.0.0.1 24
dhcp select relay
dhcp relay serer-ip 14.0.0.2
ip route-static 192.168.10.0 24 12.0.0.1
ip route-static 192.168.20.0 24 12.0.0.1
ip route-static 14.0.0.0 24 12.0.0.1
配置R3：
配置g0/0/0口的dhcp中继，并配置路由表
dhcp enable
ip pool DHCP15
network 15.0.0.0 mask 24
gateway-list 15.0.0.1
dns-list 8.8.8.8 2.2.2.2
excluded-ip-address 15.0.0.100 15.0.0.254

ip pool DHCPVLAN10
network 192.168.10.0 mask 24
gateway-list 192.168.10.1
dns-list 8.8.8.8 2.2.2.2

ip pool DHCPVLAN20
network 192.168.20.0 mask 24
gateway-list 192.168.20.1
dns-list 8.8.8.8 2.2.2.2

int g0/0/0
dhcp select global
2、图示步骤
SW1配置：配置sw1口：配置vlan口和 trunk口


配置R1：g0/0/0和g0/0/2配置地址，g0/0/1配置地址和DHCP模式，配14，10,20的路由




配置R2：g0/0/0配置地址，g0/0/1配置DHCP模式，配置默认路由


配置R3：DHCP模式配置，配置默认路由





查看地址ping