赣州市MedAccred _AC8121电子电缆和线束组件的审核标准（49）

最新推荐文章于 2021-08-05 11:14:45 发布

weixin_47885104

最新推荐文章于 2021-08-05 11:14:45 发布

阅读量57

点赞数

本文链接：https://blog.csdn.net/weixin_47885104/article/details/119384139

版权

26.1 P- Is there a procedure for crimping?YES/NO

26.2 P- Are there procedures for wire positioning and placement into a terminal to be crimped?YES/NO

26.3 P- If used, is there a procedure for validating and using crimp tooling other than manufacturer’s approved tooling?YES/NO/NA

26.4 P- Is there a procedure that defines the acceptance criteria of crimped terminations?YES/NO

26.5 P- If used is there a procedure for the control and use of automatic crimping equipment?YES/NO/NA

Audit Note: any powered crimping tool (other than by hand) that uses an automatic feed to bring the crimp contact to the crimp dies.

26.6P- If used is there a procedure for the control and use of semi-automatic crimping equipment?YES/NO/NA

Audit Note: any powered crimping tool (other than by hand) that requires the operator to manually insert the crimp contact into the crimp dies.

26.7P- If used is there a procedure for the control and use of manual crimping tools?YES/NO/NA

26.8 P- Is there a procedure that only permits the use of full cycle crimping tools?YES/NO

26.9 P- Is there a procedure for sealing of adjustable ratchets to prevent readjustment?YES/NO/NA

Audit Note: NA applies when there is no customer requirement for the sealing of adjustable ratchets.

26.10 P- Is there a procedure preventing the crimping of solid wire?YES/NO

关注