天津市MedAccred _AC8121电子电缆和线束组件的审核标准 （60）

30.3.13 C- If required, are the requirements for the work life / pot life of the adhesive material used for connector sleeves and boots being met?YES/NO/NA

30.3.14 C- If required, are the requirements for the mix ratios of the adhesive material used for connector sleeves and boots being met?YES/NO/NA

30.3.15 C- If required, is the adhesive used for connector sleeves and boots removed in accordance with procedures?YES/NO/NA

30.3.16 C- If required, is the masking for the adhesive used for connector sleeves and boots applied and removed in accordance with procedures?YES/NO/NA

30.3.17 C- Are all drawings, machine programs, written instructions, and product specific fixtures for the adhesion of connector sleeves and boots under configuration control and do they match the assembly traveler?YES/NO

Audit Note: Question NA applies when sleeves and boots do not have adhesives.

30.3.18 C- If required, is tooling used in the adhesion of sleeves and boots on connectors cleaned according to the procedure?YES/NO/NA

30.3.19 C- If required, is there evidence of preventative maintenance and calibration of equipment, including ovens, gauges, and scales, used in the adhesion of sleeves and boots on connectors?YES/NO/NA

30.3.20 C- If required, is there evidence that temperature, humidity, particles, and ventilation of the room are controlled according to procedures for the adhesion of sleeves and boots on connectors?YES/NO/NA

30.3.21 C- If required, is there evidence that thickness and hardness of the cured adhesive used on sleeves and boots for connectors are being verified?YES/NO/NA