BGP报告一
一、实验要求
使用BGP,按照真实网络环境的逻辑配置;实现所有PC可以相互通讯
二、实验拓扑图及ip地址规划
三、实验思路及步骤
1.配置ip地址
R1
[R1]int lo0
[R1-LoopBack0]ip a 1.1.1.1 255.255.255.255
[R1-LoopBack0]int g0/0/0
[R1-GigabitEthernet0/0/0]ip a 12.1.1.1 24
Feb 11 2022 14:56:39-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R1-GigabitEthernet0/0/0]int g0/0/1
[R1-GigabitEthernet0/0/1]ip a 11.1.1.1 24
Feb 11 2022 14:56:56-08:00 R1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
R2
[R2]int lo0
[R2-LoopBack0]ip a 1.1.1.2 255.255.255.255
[R2-LoopBack0]int g0/0/0
[R2-GigabitEthernet0/0/0]ip a 12.1.1.2 24
Feb 11 2022 14:58:58-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R2-GigabitEthernet0/0/0]int g0/0/1
[R2-GigabitEthernet0/0/1]ip a 23.1.1.1 24
Feb 11 2022 14:59:09-08:00 R2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[R2-GigabitEthernet0/0/1]int g0/0/2
[R2-GigabitEthernet0/0/2]ip a 22.1.1.1