OSPF环境下的MGRE实验

最新推荐文章于 2024-09-23 10:29:24 发布

熠熠fly

最新推荐文章于 2024-09-23 10:29:24 发布

阅读量949

点赞数 43

文章标签：网络服务器 linux

本文链接：https://blog.csdn.net/weixin_52797759/article/details/137926492

版权

1.配置IP

[R1]int LoopBack 0
[R1-LoopBack0]ip address 192.168.1.1 24
[R1-GigabitEthernet0/0/0]ip address 12.0.0.1 24
[R1-GigabitEthernet0/0/1]ip address 10.0.0.1 24

[R2]int LoopBack 0
[R2-LoopBack0]ip address 192.168.2.1 24
[R2-GigabitEthernet0/0/0]ip address 23.0.0.1 24

[R3]int LoopBack 0
[R3-LoopBack0]ip address 192.168.3.1 24
[R3-GigabitEthernet0/0/0]ip address 34.0.0.1 24

[R4]int LoopBack 0
[R4-LoopBack0]ip address 192.168.4.1 24
[R4-GigabitEthernet0/0/0]ip address 45.0.0.1 24

[R5]int LoopBack 0
[R5-LoopBack0]ip address 192.168.5.1 24
[R5-GigabitEthernet0/0/0]ip address 56.0.0.1 24

[ISP]int LoopBack 0
[ISP-LoopBack0]ip address 6.6.6.6 24
[ISP-GigabitEthernet0/0/1]ip address 10.0.0.2 24
[ISP-GigabitEthernet0/0/0]ip address 12.0.0.2 24
[ISP-GigabitEthernet2/0/0]ip address 23.0.0.2 24
[ISP-GigabitEthernet3/0/0]ip address 34.0.0.2 24
[ISP-GigabitEthernet4/0/0]ip address 45.0.0.2 24
[ISP-GigabitEthernet0/0/2]ip address 56.0.0.2 24

2.配置缺省路由

[R1]ip route-static 0.0.0.0 0 10.0.0.2
[R1]ip route-static 0.0.0.0 0 12.0.0.2

[R2]ip route-static 0.0.0.0 0 23.0.0.2

[R3]ip route-static 0.0.0.0 0 34.0.0.2

[R4]ip route-static 0.0.0.0 0 45.0.0.2

[R5]ip route-static 0.0.0.0 0 56.0.0.2

3.R1/R4/R5为全连的MGRE,R1为中心站点

[R1]int Tunnel 0/0/0
[R1-Tunnel0/0/0]ip address 192.168.6.1 24
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp
[R1-Tunnel0/0/0]source 12.0.0.1
[R1-Tunnel0/0/0]nhrp network-id 50
[R1-Tunnel0/0/0]nhrp entry 192.168.6.2 45.0.0.1 register
[R1-Tunnel0/0/0]nhrp entry 192.168.6.3 56.0.0.1 register

[R4]int Tunnel 0/0/0
[R4-Tunnel0/0/0]ip address 192.168.6.2 24
[R4-Tunnel0/0/0]tunnel-protocol gre p2mp
[R4-Tunnel0/0/0]source 45.0.0.1
[R4-Tunnel0/0/0]nhrp network-id 50
[R4-Tunnel0/0/0]nhrp entry 192.168.6.1 12.0.0.1 register
[R4-Tunnel0/0/0]nhrp entry 192.168.6.3 56.0.0.1 register

[R5]int Tunnel 0/0/0
[R5-Tunnel0/0/0]ip address 192.168.6.3 24
[R5-Tunnel0/0/0]tunnel-protocol gre p2mp
[R5-Tunnel0/0/0]source 56.0.0.1
[R5-Tunnel0/0/0]nhrp network-id 50
[R5-Tunnel0/0/0]nhrp entry 192.168.6.1 12.0.0.1 register
[R5-Tunnel0/0/0]nhrp entry 192.168.6.2 45.0.0.1 register

4.R1/R2/R3为星型拓扑，R1为中心站点

[R1]int Tunnel 0/0/1
[R1-Tunnel0/0/1]ip address 192.168.7.1 24
[R1-Tunnel0/0/1]tunnel-protocol gre p2mp
[R1-Tunnel0/0/1]source 10.0.0.1
[R1-Tunnel0/0/1]nhrp network-id 50
[R1-Tunnel0/0/1]nhrp entry multicast dynamic

[R2]int Tunnel 0/0/1
[R2-Tunnel0/0/1]ip address 192.168.7.2 24
[R2-Tunnel0/0/1]tunnel-protocol gre p2mp
[R2-Tunnel0/0/1]nhrp network-id 50
[R2-Tunnel0/0/1]source GigabitEthernet 0/0/0
[R2-Tunnel0/0/1]nhrp entry 192.168.7.1 10.0.0.1 register

[R3]int Tunnel 0/0/1
[R3-Tunnel0/0/1]ip address 192.168.7.3 24
[R3-Tunnel0/0/1]tunnel-protocol gre p2mp
[R3-Tunnel0/0/1]source GigabitEthernet 0/0/0
[R3-Tunnel0/0/1]nhrp network-id 50
[R3-Tunnel0/0/1]nhrp entry 192.168.7.1 10.0.0.1 register

5.配置OSPF使私有网段可以相互通信

[R1]ospf 1 router-id 1.1.1.1
[R1-ospf-1]area 0
[R1-ospf-1-area-0.0.0.0]network 192.168.1.0 0.0.0.255
[R1-ospf-1-area-0.0.0.0]network 192.168.6.0 0.0.0.255
[R1-ospf-1-area-0.0.0.0]network 192.168.7.0 0.0.0.255

[R2]ospf 1 router-id 2.2.2.2
[R2-ospf-1]area 0
[R2-ospf-1-area-0.0.0.0]network 192.168.7.0 0.0.0.255
[R2-ospf-1-area-0.0.0.0]network 192.168.2.0 0.0.0.255

[R3]ospf 1 router-id 3.3.3.3
[R3-ospf-1]area 0
[R3-ospf-1-area-0.0.0.0]network 192.168.3.0 0.0.0.255
[R3-ospf-1-area-0.0.0.0]network 192.168.7.0 0.0.0.255

[R4]ospf 1 router-id 4.4.4.4
[R4-ospf-1]area 0
[R4-ospf-1-area-0.0.0.0]network 192.168.4.0 0.0.0.255
[R4-ospf-1-area-0.0.0.0]network 192.168.6.0 0.0.0.255

[R5]ospf 1 router-id 5.5.5.5
[R5-ospf-1]area 0
[R5-ospf-1-area-0.0.0.0]network 192.168.5.0 0.0.0.255
[R5-ospf-1-area-0.0.0.0]network 192.168.6.0 0.0.0.255