ESP32接入华为云物联网平台（验证可行）

@AAQ

于 2024-07-31 09:47:07 发布

阅读量34

点赞数

文章标签：华为云物联网 struts

原文链接：https://blog.csdn.net/weixin_43351158/article/details/125818158

版权

！！！！！！！！！！！！！使用PubSubClient2.8.0！！！！！！！！！！！！！！

替换三元组和服务ID即可连接

参考：【代码分享】ESP32接入华为云物联网平台完成属性定时上报（Arduino IDE开发）_adrunioide连接华为云-CSDN博客

//ESP32接入华为云物联网平台完成属性定时上报
#include <WiFi.h>
#include <PubSubClient.h>  //使用PubSubClient2.8.0
WiFiClient espClient;
PubSubClient client(espClient);
const char* ssid = "X50";              //wifi名称
const char* password =  "12345678";    //wifi密码
const char* mqttServer = "140cb684fa.st1.iotda-device.cn-south-1.myhuaweicloud.com";       //例如iot-mqtts.cn-north-4.myhuaweicloud.com，详情参考华为云控制台
const int mqttPort = 1883;              //华为MQTT地址1883）
//三元组：三元组生成链接：https://iot-tool.obs-website.cn-north-4.myhuaweicloud.com/
const char* ClientId ="xxx";         
const char* mqttUser ="xxx";
const char* mqttPassword = "xxx";
//注册设备的ID和密钥
#define device_id "xx" 
#define secret "xx" 
//注意修改自己的服务ID   
#define Iot_link_Body_Format "{\"services\":[{\"service_id\":\"Dev_data\",\"properties\":{%s" 
//参考上报格式：{"services":[{"service_id":"Dev_data","properties":{"temp": 39}}]}
//设备属性上报
#define Iot_link_MQTT_Topic_Report "$oc/devices/"device_id"/sys/properties/report"
int data_temp=1;   //模拟上报的温度值
long lastMsg = 0; 
void setup() {
  //wifi初始化
  Serial.begin(115200);
  WiFi.begin(ssid, password);
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.println("Connecting to WiFi..");
  }
  Serial.println("Connected to the WiFi network");
  //MQTT初始化
  MQTT_Init();
 //更多资料欢迎关注微信公众号“IOT趣制作”
}
void loop() {
  if (!client.connected()){
    MQTT_Init();
  } 
  else client.loop();
  long now = millis();
  if (now - lastMsg > 5000)//定时上报
  {
    lastMsg = now;
    MQTT_POST();
    data_temp++;
  }
}
void MQTT_Init()
{
  client.setServer(mqttServer, mqttPort);
  client.setKeepAlive(60);
  while (!client.connected()) 
  {
    Serial.println("Connecting to MQTT...");
    if (client.connect(ClientId, mqttUser, mqttPassword )) 
    {
      Serial.println("connected");
    } 
    else 
    {
      Serial.print("failed with state ");
      Serial.print(client.state());
      delay(3000);
    }
  } 
}
void MQTT_POST()
{
  char properties[32];
  char jsonBuf[128];
  sprintf(properties,"\"temp\":%d}}]}",data_temp);
  sprintf(jsonBuf,Iot_link_Body_Format,properties);
  client.publish(Iot_link_MQTT_Topic_Report, jsonBuf);
  Serial.println(Iot_link_MQTT_Topic_Report);
  Serial.println(jsonBuf);
  Serial.println("MQTT Publish OK!");
}