锐捷防火墙（WEB）——高级功能——ipv6—OSPFv3

目录

一、组网需求

二、网络拓扑

三、配置要点

四、操作步骤

五、验证效果

---

 

一、组网需求

       在IPv6网络内部使用OSPFv3

二、网络拓扑

三、配置要点

RGW1

（1）配置基本上网功能

（2）配置OSPFv3

 RGW2

（1）配置NAT64上网工呢过

（2）配置OSPF

四、操作步骤

RGW1

     （1）配置基本上网功能，参照IPv6--上网配置

    config system interface

         edit "internal"

                    config ipv6

                set ip6-allowaccess ping https http

                set ip6-address 2001:bb:1::1/48

        next

     edit "wan1"

            config ipv6

                set ip6-allowaccess ping https

                set ip6-address 2001:aa:1::1/48

      next

   end

     （2）配置OSPFv6

      RG-WALL # show router ospf6

     config router ospf6

     set router-id 192.168.1.200              //指定路由ID

     config area

            edit 0.0.0.0                                //配置area 0

            next

        end

        config ospf6-interface

            edit "wan1"                              // 名字，可自定义

                set interface "wan1"             //配置wan1口运行OSPFv6

            next

        end

        config redistribute "connected"    //充分发直连路由

            set status enable

        end

        config redistribute "static"

     end

 RGW2

（1）配置NAT64上网功能----参照 IPv6----NAT64

config system interface

edit "internal"

config ipv6

set ip6-allowaccess ping https telnet

set ip6-address 2001:aa:1::10/48

next

 edit "wan1"

set vdom "root"

 set ip 192.168.118.25 255.255.255.0

set allowaccess ping https

set type physical

set description "        "

set snmp-index 2

next

end

（2）配置OSPFv6

config router ospf6

    set default-information-originate always                        //向OSPF邻居RGW1发布一条默认路由

    set router-id 192.168.1.99                 //配置路由ID

        config area                                  //配置区域 0.0.0.0

            edit 0.0.0.0

            next

        end

        config ospf6-interface                  //指定internal接口运行OSPF协议

            edit "internal"                          // 名字，可自定义

                set interface "internal"

            next

        end

end

五、验证效果

（1） 查看OSPF邻居

RG-WALL # get router info6   ospf  neighbor

OSPFv3 Process (*null*)

Neighbor ID     Pri   State           Dead Time   Interface  Instance ID

192.168.1.99      1   Full/Backup     00:00:34    wan1       0

（2）查看RGW1路由表：

RG-WALL # get  router  info6   routing-table

IPv6 Routing Table

Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF,

       IA - OSPF inter area

       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

       E1 - OSPF external type 1, E2 - OSPF external type 2

       I - IS-IS, B - BGP

       * - candidate default

Timers: Uptime

O*E2    ::/0 [110/1] via fe80::a5b:eff:fe6f:f7a6, wan1, 00:20:29                                     //学到的默认路由

C       ::1/128 via ::, root, 02:21:41

C       2001:aa:1::/48 via ::, wan1, 02:13:38

C       2001:bb:1::/48 via ::, internal, 01:58:51

（3）RGW1用户可以通过RGW2访问IPv4互联网