variable ‘SmallFont‘ must be const in order to be put into read-only section by means of ‘__attribut

Arduino IDE 1.6.6，编译错误内容：
Arduino:1.6.6 (Windows 7), 开发板："Arduino/Genuino Uno"
D:\Arduino project\libraries\UTFT\DefaultFonts.c:21:14: error: variable 'SmallFont' must be const in order to be put into read-only section by means of '__attribute__((progmem))'


fontdatatype SmallFont[1144] PROGMEM={


D:\Arduino project\libraries\UTFT\DefaultFonts.c:125:14: error: variable 'BigFont' must be const in order to be put into read-only section by means of '__attribute__((progmem))'
fontdatatype BigFont[3044] PROGMEM={


D:\Arduino project\libraries\UTFT\DefaultFonts.c:234:14: error: variable 'SevenSegNumFont' must be const in order to be put into read-only section by means of '__attribute__((progmem))'
fontdatatype SevenSegNumFont[2004] PROGMEM={
exit status 1
-----------------------------------------------------------------------------------------------------------


解决办法：
修改UTFT库文件下的DefaultFonts.c文件，在SmallFont、BigFont、SevenSegNumFont前添加const
例如原代码：fontdatatype SmallFont[1144] PROGMEM={
修改为：const fontdatatype SmallFont[1144] PROGMEM={


以上修改后IDE1.6.6可编译通过