RIP实验

最新推荐文章于 2024-07-24 08:30:35 发布
最新推荐文章于 2024-07-24 08:30:35 发布
阅读量63 收藏
点赞数 1
分类专栏： # HCNP路由交换 文章标签： 网络
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/weixin_60415234/article/details/134371901
版权

【实验要求】

【实验拓扑】

【R1配置】

The device is running!

<Huawei> User interface con0 is available



Please Press ENTER.

<Huawei>
<Huawei>sys 
Enter system view, return user view with Ctrl+Z.
[Huawei]sys R1
[R1]
Nov 13 2023 09:59:25-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 1, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R1]int e0/0/0
[R1-Ethernet0/0/0]ip add 10.0.7.1 30
[R1-Ethernet0/0/0]
Nov 13 2023 10:01:36-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Ethernet0/0/0 has entered the UP state.
[R1-Ethernet0/0/0]q
[R1]loopback1
    ^
Error: Unrecognized command found at '^' position.
[R1]
Nov 13 2023 10:01:45-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 2, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R1]int loopback1
[R1-LoopBack1]ip a
Nov 13 2023 10:01:55-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 3, the ch
ange loop count is 0, and the maximum number of records is 4095.
                   ^
Error:Incomplete command found at '^' position.
[R1-LoopBack1]ip add 10.0.1.1 24
[R1-LoopBack1]int 
Nov 13 2023 10:02:15-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 4, the ch
ange loop count is 0, and the maximum number of records is 4095.loopback2
[R1-LoopBack2]ip add 10.0.2.
Nov 13 2023 10:02:25-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 5, the ch
ange loop count is 0, and the maximum number of records is 4095.1 24
[R1-LoopBack2]int loopback
Nov 13 2023 10:02:35-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 6, the ch
ange loop count is 0, and the maximum number of records is 4095.3
[R1-LoopBack3]ip add 10.0.
Nov 13 2023 10:02:45-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 7, the ch
ange loop count is 0, and the maximum number of records is 4095.3.1 24
[R1-LoopBack3]
Nov 13 2023 10:02:55-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 8, the ch
ange loop count is 0, and the maximum number of records is 4095. User interface con0 is available



Please Press ENTER.

<R1>sys
Enter system view, return user view with Ctrl+Z.
[R1]rip 1
[R1-rip-1]ri
Nov 13 2023 10:13:25-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 9, the ch
ange loop count is 0, and the maximum number of records is 409
[R1-rip-1]verion 2
          ^
Error: Unrecognized command found at '^' position.
[R1-rip-1]version 2
[R1-rip-1]network 10.0.0.0
Nov 13 2023 10:13:55-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 10, the c
hange loop count is 0, and the maximum number of records is 4095.
[R1-rip-1]
Nov 13 2023 10:14:05-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 11, the c
hange loop count is 0, and the maximum number of records is 4095. User interface con0 is available



Please Press ENTER.

<R1>sys
Enter system view, return user view with Ctrl+Z.
[R1]dis ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 15       Routes : 15       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

       10.0.0.0/30  RIP     100  1           D   10.0.7.2        Ethernet0/0/0
       10.0.1.0/24  Direct  0    0           D   10.0.1.1        LoopBack1
       10.0.1.1/32  Direct  0    0           D   127.0.0.1       LoopBack1
       10.0.2.0/24  Direct  0    0           D   10.0.2.1        LoopBack2
       10.0.2.1/32  Direct  0    0           D   127.0.0.1       LoopBack2
       10.0.3.0/24  Direct  0    0           D   10.0.3.1        LoopBack3
       10.0.3.1/32  Direct  0    0           D   127.0.0.1       LoopBack3
       10.0.4.0/24  RIP     100  2           D   10.0.7.2        Ethernet0/0/0
       10.0.5.0/24  RIP     100  2           D   10.0.7.2        Ethernet0/0/0
       10.0.6.0/24  RIP     100  2           D   10.0.7.2        Ethernet0/0/0
       10.0.7.0/30  Direct  0    0           D   10.0.7.1        Ethernet0/0/0
       10.0.7.1/32  Direct  0    0           D   127.0.0.1       Ethernet0/0/0
       10.0.8.0/30  RIP     100  1           D   10.0.7.2        Ethernet0/0/0
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[R1] User interface con0 is available



Please Press ENTER.

【R2配置】

The device is running!

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys R2
[R2]
Nov 13 2023 09:47:25-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 1, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R2]int e0/0/0
[R2-Ethernet0/0/0]ip add 10.0.8.1 30
[R2-Ethernet0/0/0]
Nov 13 2023 09:58:53-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Ethernet0/0/0 has entered the UP state.
Nov 13 2023 09:58:55-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 2, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R2-Ethernet0/0/0]int loopback4
[R2-LoopBack4]ip add 10.
Nov 13 2023 10:03:15-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 3, the ch
ange loop count is 0, and the maximum number of records is 4095.0.4.1 24
[R2-LoopBack4]int loopback
Nov 13 2023 10:03:25-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 4, the ch
ange loop count is 0, and the maximum number of records is 4095.5
[R2-LoopBack5]ip add 10.0.5.1 24
[R2-LoopBack5]
Nov 13 2023 10:03:35-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 6, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R2-LoopBack5]int loopback6
[R2-LoopBack6]
[R2-LoopBack6]
Nov 13 2023 10:03:45-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 7, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R2-LoopBack6]ip add 10.0.6.1 24
[R2-LoopBack6]
Nov 13 2023 10:04:05-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 8, the ch
ange loop count is 0, and the maximum number of records is 4095. User interface con0 is available



Please Press ENTER.

<R2>sys
Enter system view, return user view with Ctrl+Z.
[R2]rip 1
[R2-rip-1]v
Nov 13 2023 10:14:45-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 9, the ch
ange loop count is 0, and the maximum number of records is 4095.er
[R2-rip-1]version 2
[R2-rip-1]network 10.
Nov 13 2023 10:14:55-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 11, the c
hange loop count is 0, and the maximum number of records is 4095.0.0.0
[R2-rip-1]network 
Nov 13 2023 10:15:05-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 12, the c
hange loop count is 0, and the maximum number of records is 4095.
                  ^
Error:Incomplete command found at '^' position.
[R2-rip-1]network 10.0.0.0
Error: The specified network already exists in the process.
[R2-rip-1]q
[R2] User interface con0 is available



Please Press ENTER.

<R2>sys
Enter system view, return user view with Ctrl+Z.
[R2]dis ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 15       Routes : 15       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

       10.0.0.0/30  RIP     100  1           D   10.0.8.2        Ethernet0/0/0
       10.0.1.0/24  RIP     100  2           D   10.0.8.2        Ethernet0/0/0
       10.0.2.0/24  RIP     100  2           D   10.0.8.2        Ethernet0/0/0
       10.0.3.0/24  RIP     100  2           D   10.0.8.2        Ethernet0/0/0
       10.0.4.0/24  Direct  0    0           D   10.0.4.1        LoopBack4
       10.0.4.1/32  Direct  0    0           D   127.0.0.1       LoopBack4
       10.0.5.0/24  Direct  0    0           D   10.0.5.1        LoopBack5
       10.0.5.1/32  Direct  0    0           D   127.0.0.1       LoopBack5
       10.0.6.0/24  Direct  0    0           D   10.0.6.1        LoopBack6
       10.0.6.1/32  Direct  0    0           D   127.0.0.1       LoopBack6
       10.0.7.0/30  RIP     100  1           D   10.0.8.2        Ethernet0/0/0
       10.0.8.0/30  Direct  0    0           D   10.0.8.1        Ethernet0/0/0
       10.0.8.1/32  Direct  0    0           D   127.0.0.1       Ethernet0/0/0
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[R2] User interface con0 is available



Please Press ENTER.

【R3配置】

The device is running!

<Huawei> User interface con0 is available



Please Press ENTER.

<Huawei>
<Huawei>sys R3
            ^
Error:Too many parameters found at '^' position.
<Huawei>SYS
Enter system view, return user view with Ctrl+Z.
[Huawei]SYS R3
[R3]int e0/0/0
[R3-Ethernet0/0/0]ip add 
Nov 13 2023 10:06:35-08:00 R3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 1, the ch
ange loop count is 0, and the maximum number of records is 4095.
                         ^
Error:Incomplete command found at '^' position.
[R3-Ethernet0/0/0]ip add 10.0.7.1 30
[R3-Ethernet0/0/0]
Nov 13 2023 10:07:12-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Ethernet0/0/0 has entered the UP state.
Nov 13 2023 10:07:15-08:00 R3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 2, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R3-Ethernet0/0/0]ip add 10.0.7.2 30
[R3-Ethernet0/0/0]int g0/0/
Nov 13 2023 10:07:35-08:00 R3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 3, the ch
ange loop count is 0, and the maximum number of records is 4095.
                      ^
Error: Unrecognized command found at '^' position.
[R3-Ethernet0/0/0]int e0/0/1
[R3-Ethernet0/0/1]ip add 10.0.8.2 30
[R3-Ethernet0/0/1]
Nov 13 2023 10:08:10-08:00 R3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface Ethernet0/0/1 has entered the UP state.
[R3-Ethernet0/0/1]
Nov 13 2023 10:08:15-08:00 R3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 4, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R3-Ethernet0/0/1]int g0/0/0
[R3-GigabitEthernet0/0/0]ip add 10.0.0.1 30
[R3-GigabitEthernet0/0/0]
Nov 13 2023 10:09:03-08:00 R3 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state.
Nov 13 2023 10:09:05-08:00 R3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 5, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R3-GigabitEthernet0/0/0]q
[R3]rip 1
[R3-rip-1]version2
          ^
Error: Unrecognized command found at '^' position.
[R3-rip-1]
Nov 13 2023 10:10:55-08:00 R3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 6, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R3-rip-1]version 2
[R3-rip-1]
Nov 13 2023 10:11:05-08:00 R3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 7, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R3-rip-1]network 10.0.0.0
[R3-rip-1]
Nov 13 2023 10:11:25-08:00 R3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 8, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R3-rip-1]q
[R3]int g0/0/0
[R3-GigabitEthernet0/0/0]rip summary 10.0.0.0 255.255.248.0
[R3-GigabitEthernet0/0/0]
Nov 13 2023 10:12:45-08:00 R3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 9, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R3-GigabitEthernet0/0/0]q
[R3]dis ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 14       Routes : 14       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

       10.0.0.0/30  Direct  0    0           D   10.0.0.1        GigabitEthernet
0/0/0
       10.0.0.1/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
       10.0.1.0/24  RIP     100  1           D   10.0.7.1        Ethernet0/0/0
       10.0.2.0/24  RIP     100  1           D   10.0.7.1        Ethernet0/0/0
       10.0.3.0/24  RIP     100  1           D   10.0.7.1        Ethernet0/0/0
       10.0.4.0/24  RIP     100  1           D   10.0.8.1        Ethernet0/0/1
       10.0.5.0/24  RIP     100  1           D   10.0.8.1        Ethernet0/0/1
       10.0.6.0/24  RIP     100  1           D   10.0.8.1        Ethernet0/0/1
       10.0.7.0/30  Direct  0    0           D   10.0.7.2        Ethernet0/0/0
       10.0.7.2/32  Direct  0    0           D   127.0.0.1       Ethernet0/0/0
       10.0.8.0/30  Direct  0    0           D   10.0.8.2        Ethernet0/0/1
       10.0.8.2/32  Direct  0    0           D   127.0.0.1       Ethernet0/0/1
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[R3] User interface con0 is available



Please Press ENTER.

【R4配置】

The device is running!

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys R4
[R4]
Nov 13 2023 09:46:35-08:00 R4 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 1, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R4]INT e0/0/0
[R4-Ethernet0/0/0]ip add 10.0.0.2 30
[R4-Ethernet0/0/0]
Nov 13 2023 09:47:07-08:00 R4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Ethernet0/0/0 has entered the UP state.
[R4-Ethernet0/0/0]
Nov 13 2023 09:47:15-08:00 R4 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 2, the ch
ange loop count is 0, and the maximum number of records is 4095. User interface con0 is available



Please Press ENTER.

<R4>sys 
Enter system view, return user view with Ctrl+Z.
[R4]sys R4
[R4]int e0/0/0
[R4-Ethernet0/0/0]ip add 10.0.0.2 30
Error: The address already exists.
[R4-Ethernet0/0/0]q
[R4]rip 1
[R4-rip-1]version 2
[R4-rip-1]network
Nov 13 2023 10:15:46-08:00 R4 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 4, the ch
ange loop count is 0, and the maximum number of records is 4095. 10.0.0.0
[R4-rip-1]
Nov 13 2023 10:15:56-08:00 R4 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 5, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R4-rip-1]q
[R4]dis ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 6        Routes : 6        

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

       10.0.0.0/21  RIP     100  1           D   10.0.0.1        Ethernet0/0/0
       10.0.0.0/30  Direct  0    0           D   10.0.0.2        Ethernet0/0/0
       10.0.0.2/32  Direct  0    0           D   127.0.0.1       Ethernet0/0/0
       10.0.8.0/30  RIP     100  1           D   10.0.0.1        Ethernet0/0/0
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[R4] User interface con0 is available



Please Press ENTER.

【实验结果】

yosh'joy！！
关注
  • 1
    点赞
  • 踩
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
专栏目录
华为eNSP配置静态路由配置实验
weixin_45409403的博客
12-11 3810
拓扑图如下： （1）R1的配置 <Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]sysname R1 Oct 22 2019 17:37:56-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25. 191.3.1 configur...
Rip实验
mrs_zzj的博客
07-10 1993
笔者还只是一个初学者，希望用csdn记录下来自己的学习过程。也希望自己的学习中遇到的困难和问题可以给其他同学一个参考。我打算分为以下4部分来讲述Rip。 目录 一、什么是Rip协议 二、和静态路由的区别 三、Rip的配置 四、总结 一、什么是Rip协议 简单解释一下 Rip 协议，Rip协议首先是一个基于距离矢量算法的动态路由协议。假如路由器接到了一个消息，它需要知道这条消息想去哪里，下一跳是谁才可以帮助这条信息正确无误的到达正确的目的地。这是路由器的作用。ri...
rip实验
weixin_52681985的博客
10-30 960
1.rip基础实验 搭建rip网络，通告 路由表结果 ripv1版本，发送数据包，不携带掩码 rip v2版本，发送数据包，携带掩码 2. rip接口认证 搭建rip网络，配置路由器R3作为攻击者，接入公司网络，模拟网络攻击，并配置ripv2协议，通告该网段，查看此时路由表 R3模拟攻击演示，在R3ping -c 10000 192.168.10.1，在R3处配置两个环回接口，并在ripv2协议中通告这两个欺骗的网段 查看R1和R2的路由表配置ripv...
RIP以及实验操作
2202_75588230的博客
01-11 259
RIP
静态路由配置
weixin_30596343的博客
07-25 184
静态路由配置 什么是静态路由？ 静态路由是指由用户或网络管理员手工配置的路由信息。当网络的拓扑结构或链路的状态发生变化时，网络管理员需要手工去修改路由表中相关的静态路由信息。静态路由信息在缺省情况下是私有的，不会传递给其他的路由器。 实验环境：华为模拟器eNSP 现在有这样一个拓扑图： 很明显路由器R1和R3之间无法通信，ping一下试试。 [R1]ping 192.168.2.2 PING 1...
ensp rip实验
weixin_53308294的博客
07-10 2146
需求: R1-R2-R3-R4- R5运行RIPV2 ，R6-R7运行RIPV1 1,使用合理IP地址规划网络，各自创建环回接口 2, R1创建环回172.16.1.1/24 172.16.2.1/24 172.16.3.1/24 3，要求R3使用R2访问R1环回 4，减少路由条目数量，增加路由传递安全性 5, R5创建一个环回模拟运营商，不能宣告 6, R1 telnet R2环回实际telnet到R7上 7, R6-R7路由器不能学习到达R1环回路由 8,全网可达............
RIP实验报告
qq_52302685的博客
12-13 1191
RIP实验
计算机网络实验-RIP实验报告.pdf
04-21
RIP实验报告，计算机网络实验 如果拓扑图如图 11-7 所示，应该如何配置才能使所有 PC 机相互通信？ 如果是 3 个路由器组成的拓扑图如图 11-8 所示，应该如何配置才能使 所有 PC 机相互通信？
GNS3的RIP实验
08-19
GNS3 的 RIP 实验 RIP（Routing Information Protocol）是一种广泛使用的路由选择协议，用于在自治系统内部交换路由信息。GNS3 是一个流行的网络模拟器，可以模拟各种网络场景，包括 RIP 协议的实验。 RIP 协议的...
RIP 实验报告，rip实验报告
07-11
rip实验基础配置。。。。
rip实验第四次作业3.20
04-23
在本次“RIP实验第四次作业3.20”中，我们将深入探讨RIP（Routing Information Protocol，路由信息协议）这一重要的网络路由协议。RIP是距离矢量路由协议的代表，广泛应用于小型网络环境，它基于贝尔曼-福特算法来...
【Socket 编程】基于UDP协议建立多人聊天室
稻草人敲代码的博客
07-19 465
对于服务端来说，除了要接收消息之外，还要实现一个路由转发模块，该路由转发模块可以将相应发送给所有连接的客户端。而对于客户端来说，除了要发送消息给聊天室，还要能实时看到其它所有客户端的消息。下面来看看具体实现的代码，代码只给出核心模块，其余代码模块代码可以借鉴我之前的博客。具体来说，服务器类实现的功能只有收消息。
MarkTool之TCP服务端
最新发布
Qt学视觉
07-24 155
MarkTool之TCP服务端
docker build时的网络问题
flynetcn的专栏
07-19 426
docker build网络问题
【ROS2】演示:为有损网络使用服务质量设置
cxyhjl的博客
07-22 772
目录背景先决条件运行演示命令行选项添加网络流量背景请阅读有关 QoS 设置的文档页面，以获取有关 ROS 2 中可用支持的背景信息。在这个演示中，我们将生成一个发布相机图像的节点和另一个订阅图像并在屏幕上显示图像的节点。然后，我们将模拟它们之间的丢包网络连接，并展示不同的服务质量设置如何处理不良链接。先决条件本教程假设您已安装并运行 ROS 2 和 OpenCV。有关安装说明，请...
安徽京准：NTP网络时间服务器的几种应用场景
NTP授时服务器
07-19 231
安徽京准：NTP网络时间服务器的几种应用场景
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值