华为交换机在非协商模式下配置端口速率

 实验要求：

①关闭三个交换机自协商功能，并启动全双工模式

②将SW2/SW3与PC相连的端口配置为10M速率，与SW1相连接的端口配置为100M模式；SW1端口相应配置为100M模式，并在PC端验证连通性。

SW1:

[SW1]interface g0/0/1
[SW1-GigabitEthernet0/0/1]undo negotiation auto   //关闭自协商功能
[SW1-GigabitEthernet0/0/1]duplex full             //开启全双工模式
[SW1-GigabitEthernet0/0/1]speed 100              //设置端口的速率为100Mbps

[SW1-GigabitEthernet0/0/1]interface g0/0/2
[SW1-GigabitEthernet0/0/2]undo negotiation auto
[SW1-GigabitEthernet0/0/2]duplex full
[SW1-GigabitEthernet0/0/2]speed 100
[SW1-GigabitEthernet0/0/2]q

SW2:

[SW2]interface g0/0/1
[SW2-GigabitEthernet0/0/1]undo negotiation auto
[SW2-GigabitEthernet0/0/1]duplex full
[SW2-GigabitEthernet0/0/1]speed 100
[SW2-GigabitEthernet0/0/1]Q

[SW2]interface g0/0/2	
[SW2-GigabitEthernet0/0/2]undo negotiation auto
[SW2-GigabitEthernet0/0/2]duplex full
[SW2-GigabitEthernet0/0/2]speed 10
[SW2-GigabitEthernet0/0/2]q

SW3:

[SW3]interface g0/0/1
[SW3-GigabitEthernet0/0/1]undo negotiation auto
[SW3-GigabitEthernet0/0/1]duplex full
[SW3-GigabitEthernet0/0/1]speed 100
[SW3-GigabitEthernet0/0/1]q

[SW3]interface g0/0/2
[SW3-GigabitEthernet0/0/2]undo negotiation auto
[SW3-GigabitEthernet0/0/2]duplex full
[SW3-GigabitEthernet0/0/2]speed 10
[SW3-GigabitEthernet0/0/2]q

验证连通性：