HCIP第六次作业——VLAN综合实验

一、实验要求

二、实验分析

1、将pc1/3 归入vlan 2，pc2归为vlan 3，pc4/5/6归为vlan4/5/6，并在路由器上开启一个子接口，单独管理vlan2，为vlan 2分配ip地址，物理接口为其他接口分配ip地址

2、在3号交换机的0/0/4号接口，使将vlan4/5出交换机的修改为携带标签，从而实现pc4/5不能访问pc6.

 

三、实验过程

1、路由器配置

#配置DHCP
[r1]dhcp enable 
[r1]ip pool aa
Info: It's successful to create an IP address pool.	
[r1-ip-pool-aa]network 192.168.1.0 mask 24
[r1-ip-pool-aa]gateway-list 192.168.1.1
[r1-ip-pool-aa]dns-list 114.114.114.114
[r1]ip pool bb
Info: It's successful to create an IP address pool.
[r1-ip-pool-bb]network 192.168.2.0 mask 24	
[r1-ip-pool-bb]gateway-list 192.168.2.1	
[r1-ip-pool-bb]dns-list 114.114.114.114
#配置接口
[r1]int g0/0/0.1
[r1-GigabitEthernet0/0/0.1]ip add 192.168.1.1 24	
[r1-GigabitEthernet0/0/0.1]dot1q termination vid 2
[r1-GigabitEthernet0/0/0.1]arp broadcast enable 	
[r1-GigabitEthernet0/0/0.1]dhcp select global 
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]ip add 192.168.2.1 24 
[r1-GigabitEthernet0/0/0]dhcp select global

2、交换机SW1配置

[sw1]vlan batch 2 to 6
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw1]

[sw1]int g0/0/1	
[sw1-GigabitEthernet0/0/1]port link-type access 	
[sw1-GigabitEthernet0/0/1]port default vlan 2

[sw1]int g0/0/2
[sw1-GigabitEthernet0/0/2]port link-type hybrid 	
[sw1-GigabitEthernet0/0/2]port hybrid pvid vlan 3
[sw1-GigabitEthernet0/0/2]port hybrid untagged vlan 3 4 5 6

[sw1]int g0/0/3
[sw1-GigabitEthernet0/0/3]port link-type trunk 
[sw1-GigabitEthernet0/0/3]port trunk allow-pass vlan all

[sw1]int g0/0/4
[sw1-GigabitEthernet0/0/4]port link-type hybrid 	
[sw1-GigabitEthernet0/0/4]port hybrid tagged vlan 2
[sw1-GigabitEthernet0/0/4]port hybrid untagged vlan 3 4 5 6

 

3、交换机SW2配置

[sw2]vlan batch 2 to 6
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw2]

[sw2]int g0/0/1
[sw2-GigabitEthernet0/0/1]port link-type access 	
[sw2-GigabitEthernet0/0/1]port default vlan 2

[sw2]int g0/0/2	
[sw2-GigabitEthernet0/0/2]port link-type hybrid 	
[sw2-GigabitEthernet0/0/2]port hybrid pvid vlan 4
[sw2-GigabitEthernet0/0/2]port hybrid untagged vlan 3 4 5

[sw2]int g0/0/3	
[sw2-GigabitEthernet0/0/3]port link-type trunk 	
[sw2-GigabitEthernet0/0/3]port trunk allow-pass vlan all 

[sw2]int g0/0/4
[sw2-GigabitEthernet0/0/4]port link-type trunk 	
[sw2-GigabitEthernet0/0/4]port trunk allow-pass vlan all 

 

4、交换机SW3配置

[sw3]vlan batch 2 to 6
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw3]

[sw3]int g0/0/1	
[sw3-GigabitEthernet0/0/1]port link-type hybrid 	
[sw3-GigabitEthernet0/0/1]port hybrid pvid vlan 5
[sw3-GigabitEthernet0/0/1]port hybrid untagged vlan 3 4 5

[sw3]int g0/0/2
[sw3-GigabitEthernet0/0/2]port link-type hybrid 	
[sw3-GigabitEthernet0/0/2]port hybrid pvid vlan 6	
[sw3-GigabitEthernet0/0/2]port hybrid untagged vlan 3 6

[sw3]int g0/0/4	
[sw3-GigabitEthernet0/0/4]port link-type trunk 	
[sw3-GigabitEthernet0/0/4]port trunk allow-pass vlan all 

四、实验结果