centos7的yum命令无法使用解决方法

问题:

跟着黑马的视频操作这个VMware虚拟机,和他操作步骤一样,但是使用yum时报错在网上找了一些方法,对我这个有效的是更改镜像(可能是原镜像失效)*(参考)

步骤:

1.先ip addr查看网络接口是否有配置

2.若无 命令行输入

cd  /etc/sysconfig/network-scripts 

 vi ifcfg-ens33   

 按i进入编辑模式,把ONBOOT=no改为NOBOOT=yes

按ESC,再:wq(退出保存)

重启虚拟机

3.也可以正常的ping www.baidu.com

ping www.baidu.com

4.更改yum源

先打开CentOS-Base.repo

sudo vi /etc/yum.repos.d/CentOS-Base.repo

点击 i 编辑

删除原有的yum源配置(不放心的可以先备份一份)

# CentOS-Base.repo  
#  
# 这里配置了CentOS的yum源，使用了阿里云和清华大学的镜像点。  
#  
  
[base]  
name=CentOS-$releasever - Base  
baseurl=http://mirrors.aliyun.com/centos/$releasever/os/$basearch/  
        http://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/os/$basearch/  
gpgcheck=1  
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7  
  
#released updates   
[updates]  
name=CentOS-$releasever - Updates  
baseurl=http://mirrors.aliyun.com/centos/$releasever/updates/$basearch/  
        http://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/updates/$basearch/  
gpgcheck=1  
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7  
  
#additional packages that may be useful  
[extras]  
name=CentOS-$releasever - Extras  
baseurl=http://mirrors.aliyun.com/centos/$releasever/extras/$basearch/  
        http://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/extras/$basearch/  
gpgcheck=1  
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7  
  
#additional packages that extend functionality of existing packages  
[centosplus]  
name=CentOS-$releasever - Plus  
baseurl=http://mirrors.aliyun.com/centos/$releasever/centosplus/$basearch/  
        http://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/centosplus/$basearch/  
gpgcheck=1  
enabled=0  
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7  
  
#contrib - packages by Centos Users  
[contrib]  
name=CentOS-$releasever - Contrib  
baseurl=http://mirrors.aliyun.com/centos/$releasever/contrib/$basearch/  
        http://mirrors.tuna.tsinghua.edu.cn/centos/$releasever/contrib/$basearch/  
gpgcheck=1  
enabled=0  
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7  
  
# 使用failovermethod指定优先级，这里设置为随机（roundrobin），也可以改为priority并指定每个URL的优先级  
failovermethod=roundrobin

 然后使用下面三条代码就可以了

sudo yum clean all

sudo yum makecache

sudo yum update

如有侵权,请联系删除