[QNX学习笔记]QNX sdp7.0移植至Beaglebone black board（U-Boot启动）

Beaglebone black board几乎是最便宜的支持QNX7.0的板子，用它开始学习很划算。

1.制作启动sd卡

主要过程为格式化为fat32格式，并设置为主活动分区，以下时win7下操作方式
Preparing a bootable SD card (Windows 7)
If your SD card does not already contain a bootable (active) FAT32 partition, you can use the Windows 7 Disk Management utility to create one.

##(1)Creating a bootable FAT32 partition in a Windows 7 environment
The default Windows formatting option that appears when you insert a blank (or unrecognized) SD card into a Windows PC is not sufficient to format the SD card with a bootable partition. While it can create a DOS/FAT32 partition, it does not provide an option for making this partition “Active”, or bootable. If your SD card does not already contain a bootable (active) FAT32 partition, you can create one with the Windows 7 Disk Management utility, as follows:

Open the Windows Control Panel, and run Administrative Tools.
Run the Computer Management application.
On the left pane, under the Storage category, select Disk Management.
Insert the SD card that you will use to put the QNX images on, and identify the correct volume as it appears in the “Disk Management” window.
Select the correct drive by right-clicking on it, and choose the Format option. Once the format operation is complete, under the “Status” column, it should show something like: Healthy (Active, Primary Partition).
Marking the FAT32 bootable partition active
If the SD card doesn’t show the partition as “Active”, you will need to set it to active. Wit