wifi 测试项目和依据标准

For more information refer to WLAN Test

802.11 WLAN RF Tests
IEEE 802.11 RF Layer TestsIEEE 802.11
Standard
IEEE Reference
(802.11-2007)
(802.11n-2009)
(802.11ac-2013)
IEEE Reference
(802.11-2012) (802.11ac-2013) or applicaable Regional Std
X-Series signal analyzer with N9077A WLAN measurement application89600 VSA Software with WLAN modulation anlaysis option5Vector signal generator with N7617B Signal Studio software for WLANE6640A EXM Wireless Test Set with V9077B WLAN measurement applicationN4010A Wireless Connectivity Test Set -103 for Wireless LANP-Series/EPM-P Series Power Meters

WLAN Transmitter Tests 

         
Transmit power 802.11a/g 17.3.9.1 18.3.9.2 X X  X X X4
  802.11b 18.4.7.1 17.4.7.2 X X  X X X4
  802.11g 19.4.7.1 19.4.8.2 X X  X X X4
  802.11n 20.3.21.3 20.3.20.3 X X  X X X4
  802.11p 20.3.21.3 Annex D Table 2.2 X X  X  
   FCC 47 CFR[B8] Sect 90.375 & 95.111 X X  X  
    ETSI 302 571 Sect 6.3 (ETSI 202 663 Sect 5.3) X X  X  
Spectrum mask802.11a/g17.3.9.218.3.9.3X  XX 
 802.11b18.4.7.317.4.7.4X  XX 
 802.11g19.5.4 X  XX 
 802.11n20.3.21.120.3.20.1X  XX 
 802.11ac22.3.18.122.3.18.1X  X  
 802.11p22.3.18.1Annex D2.3 table D-4, D-5 and D-6X  X  
   FCC 47 CFR[B8]Sect 90.377, 95.1509,X  X  
   ETSI 302 571 Sect 6.4X  X  
Transmission spurious802.11a/g17.3.9.318.3.9.4XX1    
 802.11b18.4.6.8 XX1    
Center frequency tolerance802.11a/g 17.3.9.4 18.3.9.5XX XX 
 802.11b18.4.7.4.517.4.7.5XX XX 
 802.11g19.4.7.219.4.8.3XX XX 
 802.11n20.3.21.420.3.20.4XX XX 
 802.11ac22.3.18.322.3.18.3XX X  
Symbol clock frequency tolerance

802.11a/g
 

 

 18.3.9.6XX XX 
 802.11b17.3.9.517.4.7.6XX XX 
 802.11g19.4.7.319.4.8.4XX XX 
 802.11n20.3.21.620.3.20.6XX XX 
 802.11ac22.3.18.322.3.18.3XX X  
Power rise/fall802.11b17.4.7.617.4.7.7X  XXX
Carrier suppression802.11b18.4.7.717.4.7.8X  XX 
Center frequency leakage802.11a17.3.9.6.118.3.9.7.2XX XX 
 802.11n20.3.21.7.220.3.20.7.2XX XX 
 802.11ac22.3.18.4.222.3.18.4.2XX X  
Spectral flatness802.11a17.3.9.6.218.3.9.7.3XX XX 
 802.11n20.3.21.220.3.20.2XX X 
 802.11ac22.3.18.222.3.18.2X X  X  
Constellation error802.11a17.3.9.6.318.3.9.7.4XX XX 
 802.11b18.4.7.817.4.7.9XX XX 
 802.11a/g19.7.2.719.7.3.8XX XX 
 802.11n20.3.21.7.320.3.20.7.3XX XX 
 802.11ac22.3.18.4.322.3.18.4.3XX X  
Modulation accuracy (EVM)
 
802.11a/g17.3.9.718.3.9.8XX XX 
 802.11b18.4.7.817.4.7.9XX XX 
 802.11g19.7.2.719.7.3.8XX XX 
 802.11n20.3.21.7.420.3.20.7.4XX XX 
 802.11ac22.3.18.4.422.3.18.4.4XX X  

WLAN Transceiver Tests

         
Out-of-band spurious emission802.11a17.3.8.418.3.9.4XX1    
 802.11g19.4.319.4.4XX1    
WLAN Receiver Tests         
Sensitivity802.11a/g17.3.10.118.3.10.2  X3X3X3 
 802.11b18.4.8.117.4.8.2  X3X3X3 
 802.11g19.5.119.5.2
19.6.2
  X3X3X3 
 802.11n20.3.22.120.3.21.1  X3X3X3 
 802.11ac22.3.19.1 22.3.19.1  X3X3  
Maximum input level802.11a17.3.10.418.3.10.5  XXX 
 802.11b18.4.8.217.4.8.3  XXX 
 802.11g19.5.319.5.4  XXX 
 802.11n20.3.22.420.3.21.4  XXX 
 802.11ac22.3.19.422.3.19.4  XXX 
Adjacent channel rejection802.11a/g17.3.10.218.3.10.3  X2X2X2 
 802.11b18.4.8.317.4.8.4  X2X2X2 
 802.11g19.5.219.5.3
19.6.3
  X2X2X2 
 802.11n20.3.22.220.3.21.2  X2X2X2 
 802.11ac22.3.19.222.3.19.2  X2X2  
 802.11p 18.3.10.3  X2X2  
   ETSI 302 571 Sect 6.8 (ETSI 202 663 Sect 5.5 Table 4)  X2X2  
Non-adjacent channel rejection802.11a17.3.10.318.3.10.4  X2X2X2 
 802.11n20.3.22.320.3.21.3  X2X2X2 
 802.11ac22.3.19.322.3.19.3  X2X2  
 802.11p 18.3.10.3  X2X2  
   ETSI 302 571 Sect 6.8 (ETSI 202 663 Sect 5.5 Table 4 )  X2X2  
Clear channel assessment802.11a/g17.3.10.518.3.10.6  X6X6X6 
 802.11b18.4.8.417.4.8.5  X6X6X6 
 802.11g19.1.219.4.7  X6X6X6 
 802.11n20.3.22.520.3.21.5  X6X6X6 
 802.11ac22.3.19.522.3.19.5  X6X6  

1 Requires spectrum analyzer mode.

2 Use a second signal generator as interferer. CW interference (for blocking tests) can be generated using Keysight N5182A MXG or E8257D PSG Analog Signal Generator

3 Test signal is fully-coded, which enables vendor-specific PER measurements to be performe N5182BN5172BN5182A MXGE4438C ESGE8267DE6640AN4010A and M9381A do not perform PER measurements.

4 Thermal sensor gives true rms power reading. Peak detector under-reads peak-average result when OFDM/modulation is applied. P-series power meters offer gating for accurate power measurements on bursted signals.

5 89600 VSA software can be used with a variety of digitizers including: X-Series Signal AnalyzersOscilloscopesLogic AnalyzersPSA Series Spectrum AnalyzerESA-E Series Spectrum AnalyzerN4010A Wireless Connectivity Test Set.

6 Test signal is fully-coded, which enables vendor-specific Clear channel assessment to be performe. N5182B, N5172B, N5182A MXG, E4438C ESG, E8267D, E6640A, N4010A and M9381A do not perform Clear channel assessment measurements.

 

http://www.keysight.com/main/editorial.jspx?cc=HK&lc=eng&ckey=1917389&id=1917389

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值