系统自编译编译

编译前准备

本人用的系统为ubuntu1804，编译前需要准下面几件事项：

1. 源码下载
2. 交叉编译器 arm-linux-gnueabihf-gcc-8.2.1
3. 必要库的安装 apt-get install XXXX
4. 注意！！！ 切换系统sh->bash

sudo dpkg-reconfigure dash
test@ubuntu:~$ ll /bin/sh
lrwxrwxrwx 1 root root 4 Apr  8 17:06 /bin/sh -> bash*

编译步骤

板卡为CPU：SSD202 SPI-Nand：FS35ND02G-S3Y2 256MB

编译Uboot

declare -x ARCH="arm"
declare -x CROSS_COMPILE="arm-linux-gnueabihf-"
#make clean
make infinity2m_spinand_defconfig
make -j8

获得 u-boot_spinand.xz.img.bin 为期望文件

编译Kernel

declare -x ARCH="arm"
declare -x CROSS_COMPILE="arm-linux-gnueabihf-"
#make clean
make infinity2m_spinand_ssc011a_s01a_minigui_defconfig
make -j8

获得 arch/arm/boot/uImage.xz 为期望文件

编译rootfs

declare -x ARCH="arm"
declare -x CROSS_COMPILE="arm-linux-gnueabihf-"
declare -x PROJECT="2D07"
./setup_config.sh ./configs/nvr/i2m/8.2.1/spinand.glibc.011a.128
cd kbuild/4.9.84
./release.sh -k ${RELEASEDIR}/kernel -b 011A -p nvr -f spinand -c i2m -l glibc -v 8.2.1
make clean
make image-nocheck

获取image/output/images文件夹为期望文件