【期刊】【结构与多学科优化】【Structural and Multidisciplinary Optimization】

本文链接：https://blog.csdn.net/wq6qeg88/article/details/136851342

《结构与多学科优化》期刊关注设计、工程、仿真、增材制造等领域的优化问题，尤其在环保和气候挑战中发挥关键作用。期刊涵盖数学基础、算法开发、案例研究等多个方面，鼓励提交与结构、流体或其他物理性能优化相关的原创研究、综述文章、工业应用等。投稿须知包括语言质量、相关性要求，并提供了详细的手稿提交和格式规范。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

Home | Structural and Multidisciplinary Optimization

train source:Structural source:and source:Multidisciplinary source:Optimization

Aims and scope 目标和范围

Structural and Multidisciplinary Optimization is at the converging frontier of design, engineering, simulation, additive manufacturing, AI and digital-twins. The field has become increasingly important for improving environmental sustainability and combating climate change through enhancing efficiency of engineering products.
结构和多学科优化处于设计、工程、仿真、增材制造、人工智能和数字孪生的融合前沿。该领域通过提高工程产品的效率，在改善环境可持续性和应对气候变化方面变得越来越重要。

The journal 期刊
• explores a wide range of topics dealing with optimization involving at least one major engineering discipline such as solid (structural), fluid, thermal, electric and electronics, electromagnetics etc.
• 探索涉及至少一个主要工程学科的优化的广泛主题，如固体（结构）、流体、热学、电气和电子学、电磁学等。
• covers multidisciplinary optimization when one discipline deals with a major physical performance listed above.
• 当一个学科处理上面列出的主要身体表现时，涵盖多学科优化。
• examines closely related fields that are relevant to design optimization.
• 研究与设计优化密切相关的领域。
• is the official journal of the International Society of Structural and Multidisciplinary Optimization (ISSMO)
• 是国际结构与多学科优化学会（ISSMO）的官方期刊

The journal’s scope ranges from mathematical foundations of the field to algorithm and software development, and from benchmark examples to case studies of practical applications in a wide range of industries including automotive, aerospace, rail, AEC (architecture, engineering and construction), mechanical, electrical, chemical, naval and bio-medical. Articles that provide broad educational value are also encouraged.
该杂志的范围从该领域的数学基础到算法和软件开发，从基准示例到广泛行业实际应用的案例研究，包括汽车、航空航天、铁路、AEC（建筑、工程和施工）、机械、电气、化学、海军和生物医学。还鼓励提供广泛教育价值的文章。
Fields such as computer-aided design and manufacturing, additive manufacturing, digital-twins, AI, system identification and modeling, inverse processes, computer simulation, bio-mechanics, biomedical applications, nanotechnology, electric and electronics systems, MEMS, optics, chemical processes, computational biology, uncertainty quantification, meta-modeling, DOE and active control of engineering products are covered when the topic is closely related to the optimization of structures, fluids or another major physics.
当主题与结构优化密切相关时，涵盖计算机辅助设计和制造、增材制造、数字孪生、人工智能、系统识别和建模、逆过程、计算机模拟、生物力学、生物医学应用、纳米技术、电气和电子系统、MEMS、光学、化学过程、计算生物学、不确定性量化、元建模、DOE 和工程产品的主动控制等领域，流体或其他主要物理学。

Submission guidelines 投稿须知

Contents 内容

Instructions for Authors
作者须知

Manuscripts must be written in English of acceptable standard. The topic must be related to
稿件必须以可接受标准的英语撰写。该主题必须与以下内容相关

optimal design of structures (stressed systems), or
结构（受力系统）的优化设计，或

multidisciplinary optimization techniques if one discipline involved is (or is potentially) structural or fluids design.
多学科优化技术，如果涉及的一个学科是（或潜在是）结构或流体设计。

Requirements for papers focusing on new or improved global optimization algorithms关注新的或改进的全局优化算法的论文要求

Suggestions for helping readers reproduce results presented in your paper帮助读者重现论文中呈现结果的建议

The following types of manuscripts will be considered for publication.
以下类型的手稿将被考虑发表。

Research Papers 研究论文

Research Papers must describe original results of research, including an abstract, an introduction with a literature survey, formulation, derivations and/or algorithm development, illustrative examples, conclusions and references with longer derivations possibly in appendices. They should preferably not exceed 12 journal pages.
研究论文必须描述研究的原始结果，包括摘要、文献调查的引言、公式、推导和/或算法开发、说明性示例、结论和参考文献，附录中可能有更长的推导。它们最好不超过 12 页。

Review Articles 评论文章

Review Articles must represent a comprehensive overview of an entire field and preferably should not exceed 18 journal pages whichmust include an exhaustive literature survey.
综述文章必须代表整个领域的全面概述，最好不超过 18 页，其中必须包括详尽的文献调查。

Industrial Applications 工业应用

Industrial Applications describe practical but challenging applications of structural and multidisciplinary optimization.
工业应用描述了结构和多学科优化的实际但具有挑战性的应用。

Brief Notes 简要说明

Brief Notes must not exceed 4 journal pages, and may describe a preliminary report on ideas and results of major importance. They receive a high priority in publication.
简要说明不得超过4页，并可以描述有关重要想法和结果的初步报告。它们在出版方面具有很高的优先权。

Educational Articles 教育文章

Educational Articles contain information which is likely to be used in teaching methods of structural and multidisciplinary optimization. It includes (i) innovative design optimization strategies and their assessment; (ii) needed tutorial material for methods that have already established their usefulness for a wide audience.
教育文章包含可能用于结构和多学科优化教学方法的信息。它包括（i）创新的设计优化策略及其评估;（ii）对于已经确定其对广大受众有用的方法所需的辅导材料。

Book Reviews 书评

Book Reviews must present a comprehensive, balanced and critical review of a book in a field related to the scope of the journal.
书评必须在与期刊范围相关的领域对一本书进行全面、平衡和批判性的评论。

Benchmark case studies 基准案例研究

Benchmark case studies contain solutions for a set of problems, which are suitable for testing new methods in future resarch papers
基准案例研究包含一组问题的解决方案，这些解决方案适用于在未来的研究论文中测试新方法

Discussions 讨论

Discussions represent constructive and meaningful comments and criticisms on any publication in the journal, submitted within twelve months of the appearance of the latter. They should not exceed two journal pages.
讨论是对期刊上任何出版物的建设性和有意义的评论和批评，在后者出现后十二个月内提交。它们不应超过两页日记。

ISSMO News ISSMO新闻

ISSMO News report on events relevant to the International Society of Structural and Multidisciplinary Optimization.
ISSMO新闻报道与国际结构与多学科优化学会相关的事件。

The final decision on the manuscript type will be made by the Editor-in-Chief just before online publlication.
稿件类型的最终决定将由主编在在线出版前做出。

1 Manuscript Submission 投稿

Manuscript Submission 投稿

Submission of a manuscript implies: that the work described has not been published before; that it is not under consideration for publication anywhere else; that its publication has been approved by all co-authors, if any, as well as by the responsible authorities – tacitly or explicitly – at the institute where the work has been carried out. The publisher will not be held legally responsible should there be any claims for compensation.
提交手稿意味着：所描述的作品以前没有发表过;它没有被考虑在其他任何地方出版;其出版已得到所有合著者（如果有的话）以及开展该工作的研究所的主管当局的默示或明确批准。如果有任何索赔，出版商将不承担任何法律责任。

Permissions 权限

Authors wishing to include figures, tables, or text passages that have already been published elsewhere are required to obtain permission from the copyright owner(s) for both the print and online format and to include evidence that such permission has been granted when submitting their papers. Any material received without such evidence will be assumed to originate from the authors.
希望包含已在其他地方发表的图表、表格或文本段落的作者，必须获得版权所有者对印刷版和在线格式的许可，并在提交论文时提供已获得此类许可的证据。在没有此类证据的情况下收到的任何材料都将被视为来自作者。

Online Submission 在线提交

Please follow the hyperlink “Submit manuscript” and upload all of your manuscript files following the instructions given on the screen.
请点击“提交稿件”的超链接，并按照屏幕上的说明上传您的所有稿件文件。

Source Files 源文件

Please ensure you provide all relevant editable source files at every submission and revision. Failing to submit a complete set of editable source files will result in your article not being considered for review. For your manuscript text please always submit in common word processing formats such as .docx or LaTeX.
请确保您在每次提交和修订时都提供所有相关的可编辑源文件。未能提交一套完整的可编辑源文件将导致您的文章不被考虑进行审核。对于您的稿件文本，请始终以常见的文字处理格式提交，例如 .docx 或 LaTeX。

Submitting Declarations 提交声明

Please note that Author Contribution information and Competing Interest information must be provided at submission via the submission interface. Only the information submitted via the interface will be used in the final published version. Please make sure that if you are an editorial board member and also a listed author that you also declare this information in the Competing Interest section of the interface.
请注意，作者贡献信息和竞争利益信息必须在提交时通过提交界面提供。只有通过界面提交的信息才会用于最终发布的版本。如果您是编委会成员，同时也是列出的作者，请确保您也在界面的“竞争利益”部分声明此信息。

Please see the relevant sections in the submission guidelines for further information on these statements as well as possible other mandatory statements.
请参阅提交指南中的相关部分，了解有关这些声明以及可能的其他强制性声明的更多信息。

2 Title Page 扉页

Please make sure your title page contains the following information.
请确保您的标题页包含以下信息。

Title 标题

The title should be concise and informative.
标题应简明扼要，内容丰富。

Author information 作者信息

The name(s) of the author(s)
作者姓名

The affiliation(s) of the author(s), i.e. institution, (department), city, (state), country
作者的隶属关系，即机构、（部门）、城市、（州）、国家
A clear indication and an active e-mail address of the corresponding author
通讯作者的明确指示和有效电子邮件地址
If available, the 16-digit ORCID of the author(s)
如果有，作者的 16 位 ORCID

If address information is provided with the affiliation(s) it will also be published.
如果地址信息随隶属关系一起提供，则该信息也将被公布。

For authors that are (temporarily) unaffiliated we will only capture their city and country of residence, not their e-mail address unless specifically requested.
对于（暂时）无关联的作者，除非特别要求，否则我们将仅捕获其居住城市和国家/地区，而不会捕获其电子邮件地址。

Large Language Models (LLMs), such as ChatGPT, do not currently satisfy our authorship criteria. Notably an attribution of authorship carries with it accountability for the work, which cannot be effectively applied to LLMs. Use of an LLM should be properly documented in the Methods section (and if a Methods section is not available, in a suitable alternative part) of the manuscript.
大型语言模型（LLM），例如 ChatGPT，目前不符合我们的作者标准。值得注意的是，作者身份的归属伴随着对作品的责任，这不能有效地应用于LLM。 LLM的使用应正确记录在手稿的方法部分（如果没有方法部分，则在合适的替代部分）。

Abstract 摘要

Please provide an abstract of 150 to 250 words. The abstract should not contain any undefined abbreviations or unspecified references.
请提供 150 至 250 字的摘要。摘要不应包含任何未定义的缩写或未指定的参考文献。

For life science journals only (when applicable)
仅适用于生命科学期刊（如适用）

Trial registration number and date of registration for prospectively registered trials
前瞻性注册试验的试验注册号和注册日期
Trial registration number and date of registration, followed by “retrospectively registered”, for retrospectively registered trials
对于追溯性注册的试验，试验注册号和注册日期，后跟“追溯注册”