在Maxwell的RMxprt中建模后进行仿真时,出现以下问题:Not enough net slot space for slot wires.
经排查,发现需对Stator中的Winding绕组项中的End/Insulation进行修改,主要是减小槽绝缘厚度(slot Liner)、降低槽满率(Limited Fill Factor)
在Maxwell的RMxprt中建模后进行仿真时,出现以下问题:Not enough net slot space for slot wires.
经排查,发现需对Stator中的Winding绕组项中的End/Insulation进行修改,主要是减小槽绝缘厚度(slot Liner)、降低槽满率(Limited Fill Factor)