1.查看服务器网络端口
ifconfig
查看带宽大小:sudo ethtool xxx
sudo ethtool eth0
[root@centos7-spider ~]# ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 1000baseT/Full
10000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: No
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Speed: 10000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: off
MDI-X: Unknown
Supports Wake-on: uag
Wake-on: d
Link detected: yes
Speed: 10000Mb/s 带宽为万兆
nload
Device eth0 [10.16.169.14] (1/2):
====================================================================
Incoming:
Curr: 27.99 kBit/s
Avg: 33.14 kBit/s
Min: 19.02 kBit/s
Max: 116.44 kBit/s
Ttl: 74.46 GByte
Outgoing:
Curr: 20.26 kBit/s
Avg: 83.46 kBit/s
Min: 17.72 kBit/s
Max: 3.19 MBit/s
Ttl: 145.30 GByte
Incoming也就是进入网卡的流量,Outgoing,也就是从这块网卡出去的流量,每一部分都有下面几个。
Curr:当前流量
Avg:平均流量
Min:最小流量
Max:最大流量
Ttl:总流量
nload默认的是eth0网卡,如果你想监测eth1网卡的流量,可以使用下面的命令。
nload eth1
同时查看多个网卡的流量情况
nload -m
//结果如下:
Device eth0 [10.16.169.14] (1/2):
========================================================================================
Incoming: Outgoing:
Curr: 30.23 kBit/s Curr: 28.14 kBit/s
Avg: 32.80 kBit/s Avg: 69.48 kBit/s
Min: 23.65 kBit/s Min: 18.23 kBit/s
Max: 133.16 kBit/s Max: 3.17 MBit/s
Ttl: 74.46 GByte Ttl: 145.30 GByte
Device lo [127.0.0.1] (2/2):
========================================================================================
Incoming: Outgoing:
Curr: 0.00 Bit/s Curr: 0.00 Bit/s
Avg: 150.82 kBit/s Avg: 150.82 kBit/s
Min: 0.00 Bit/s Min: 0.00 Bit/s
Max: 7.51 MBit/s Max: 7.51 MBit/s
Ttl: 276.67 GByte Ttl: 276.67 GByte
参考:https://www.jianshu.com/writer#/notebooks/26192912/notes/53757717/preview
https://blog.csdn.net/u011983531/article/details/80245423