RV1126 SPI DEVICE TREE CONFIG

xiaozhiwise

于 2023-05-08 19:43:18 发布

阅读量834

点赞数

分类专栏： Embedded 文章标签： linux

本文链接：https://blog.csdn.net/xiaozhiwise/article/details/130565782

版权

Embedded 专栏收录该内容

53 篇文章 1 订阅

订阅专栏

    spi0: spi@ff450000 {
       compatible = "rockchip,rv1126-spi", "rockchip,rk3066-spi";
       reg = <0xff450000 0x1000>;
       interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
       #address-cells = <1>;
       #size-cells = <0>;
       clocks = <&pmucru CLK_SPI0>, <&pmucru PCLK_SPI0>;
       clock-names = "spiclk", "apb_pclk";
       dmas = <&dmac 1>, <&dmac 0>;
       dma-names = "tx", "rx";
       pinctrl-names = "default", "high_speed";
       pinctrl-0 = <&spi0m0_cs0 &spi0m0_cs1 &spi0m0_pins>;
       pinctrl-1 = <&spi0m0_cs0 &spi0m0_cs1 &spi0m0_pins_hs>;
       status = "disabled";
   };

    spi1: spi@ff5b0000 {
       compatible = "rockchip,rv1126-spi", "rockchip,rk3066-spi";
       reg = <0xff5b0000 0x1000>;
       interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
       #address-cells = <1>;
       #size-cells = <0>;
       clocks = <&cru CLK_SPI1>, <&cru PCLK_SPI1>;
       clock-names = "spiclk", "apb_pclk";
       dmas = <&dmac 3>, <&dmac 2>;
       dma-names = "tx", "rx";
       pinctrl-names = "default", "high_speed";
       pinctrl-0 = <&spi1m0_cs0 &spi1m0_cs1 &spi1m0_pins>;
       pinctrl-1 = <&spi1m0_cs0 &spi1m0_cs1 &spi1m0_pins_hs>;
       status = "disabled";
   };

&spi0 {
    status = "okay";
    max-freq = <50000000>;
    pinctrl-names = "default", "high_speed" ;
    pinctrl-0 = <&spi0m2_cs0 &spi0m2_cs1 &spi0m2_pins>;        /* default */
    pinctrl-1 = <&spi0m2_cs0 &spi0m2_cs1 &spi0m2_pins_hs>;        /* high_speed*/
    spidev@0 {
        compatible = "rohm,dh2228fv";
        //interrupt-parent = <&gpio2>;
        //interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
        spi-max-frequency = <24000000>;
        reg = <0>;
    };
};

&spi1 {
    status = "okay";
    max-freq = <50000000>;
    pinctrl-names = "default", "high_speed1" ;
    pinctrl-0 = <&spi1m2_cs1 &spi1m2_cs0 &spi1m2_pins>;       /* &spi1m2_cs0 可以删除 */
    pinctrl-1 = <&spi1m2_cs1 &spi1m2_cs0 &spi1m2_pins_hs>; /* &spi1m2_cs0 可以删除 */
    spidev@0 {
        compatible = "rohm,dh2228fv";
        //interrupt-parent = <&gpio2>;
        //interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
        spi-max-frequency = <24000000>;
        reg = <1>;
    };
};

把 pinctrl-names，pinctrl-0，pinctrl-1屏蔽，不影响spi设备/dev/spi0.0的生成；