说明
实现文件上锁的函数有flock和fcntl,其中flock用于对文件施加建议性锁,而fcntl不仅可以施加建议性锁,还可以施加强制锁。同时,fcntl还能对文件的某一记录进行上锁,也就是记录锁。
重复上锁
使用fcntl进行上锁后(此处为写入锁,读锁可重复上锁,写锁跟读锁跟写锁都不行),如果不解锁,本进程或者其他进程再次使用 fcntl(fd, F_SETLK, &Lock)命令访问同一文件则会告知目前此文件已经上锁。加锁进程退出会自行解锁。
int fcnt1(int fd, int cmd, struct flock *lock)
flock结构
flock 结构
struct flock
{
short int l_type; //锁定的状态
short int l_whence; //决定l_start位置
off_t l_start; //锁定区域的开头位置
off_t l_len; //锁定区域的长度,若为0,为全部
pid_t l_pid; //锁定动作的进程
/*加锁整个文件,将 l_start = 0, l_whence = SEEK_SET,l_len = 0。*/
};
l_type 有三种状态:
F_RDLCK 建立一个供读取用的锁定 共享锁 readlock
F_WRLCK 建立一个供写入用的锁定 排他锁 writelock
F_UNLCK 删除之前建立的锁定 unlock
F_SETLK 设置文件锁定的状态。此时flcok 结构的l_type 值必须是F_RDLCK、F_WRLCK或F_UNLCK。如果无法建立锁定,则返回-1,错误代码为EACCES 或EAGAIN。
代码块,
此处代码为给.dmdbw_run_m10上写锁(排他锁),同时有两程序运行时lock_file(fd)会上锁失败,exit退出程序。
#include <sys/fcntl.h>
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/file.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <errno.h>
#include <string.h>
```c
int lock_file(int fd)
{
struct flock L1;
L1.l_type = F_WRLCK;
L1.l_start = 0;
L1.l_whence = SEEK_SET;
L1.l_len = 0;
/* F_SETLK: 设置锁 */
return (fcntl(fd, F_SETLK, &L1));
}
int main(int argc, char **argv)
{
int fd;
/* ORDWR: 以可读写方式打开文件
* OCREAT: 如文件不存在,则创建该文件 */
fd = open(".dmdbw_run_m10", O_RDWR|O_CREAT, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH);
if(fd < 0){ //打开失败
exit(1);
}
if(lock_file(fd) == -1) //-1上锁失败,无法锁定,存在冲突的写入锁
{
printf("on running\n");
close(fd);
exit(0);
}
printf("not running\n");
getchar();
close(fd);
return 0;
}
如有错误,希望能留言指正,感谢。