实验拓扑
实验要求
1.R6为ISP只能配置IP地址,R1-R5的环回为私有网段
2.R1/4/5为全连的MGRE结构,R1/2/3为星型的拓扑结构
3.R1为中心站点所有私有网段可以互相通讯,私有网段使用osPF完成。
实验步骤
- R6为ISP只能配置IP地址,R1-R5的环回为私有网段
interface GigabitEthernet0/0/0
ip address 13.1.1.2 255.255.255.0
interface GigabitEthernet0/0/1
ip address 12.1.1.2 255.255.255.0
interface GigabitEthernet0/0/2
ip address 14.1.1.2 255.255.255.0
interface GigabitEthernet1/0/0
ip address 15.1.1.2 255.255.255.0
interface GigabitEthernet2/0/0
ip address 16.1.1.2 255.255.255.0
interface GigabitEthernet3/0/0
ip address 17.1.1.2 255.255.255.0
R1:
R3:
R4:
R5:
- R1/4/5为全连的MGRE结构,R1/2/3为星型的拓扑结构
R1MGRE配置
interface Tunnel0/0/1
ip address 192.168.7.1 255.255.255.0
tunnel-protocol gre p2mp
source 12.1.1.1
ospf network-type broadcast ---------将接口网络类型修改为广播
nhrp entry multicast dynamic
nhrp network-id 100
R4MGRE配置
interface Tunnel0/0/1
ip address 192.168.7.2 255.255.255.0
tunnel-protocol gre p2mp
source 16.1.1.1
ospf network-type broadcast ---------将接口网络类型修改为广播
ospf dr-priority 0 ---------不参与选举,否则选举混乱
nhrp entry multicast dynamic
nhrp network-id 100
nhrp entry 192.168.7.1 12.1.1.1 register
nhrp entry 192.168.7.3 17.1.1.1 register
R5MGRE配置
interface Tunnel0/0/1
ip address 192.168.7.3 255.255.255.0
tunnel-protocol gre p2mp
source 17.1.1.1
ospf network-type broadcast ---------将接口网络类型修改为广播
ospf dr-priority 0 ---------不参与选举,否则选举混乱
nhrp entry multicast dynamic
nhrp network-id 100
nhrp entry 192.168.7.1 12.1.1.1 register
R2:
interface Tunnel0/0/0
ip address 192.168.6.2 255.255.255.0
tunnel-protocol gre p2mp
source 14.1.1.1
ospf network-type broadcast ---------将接口网络类型修改为广播
ospf dr-priority 0 ---------不参与选举,否则选举混乱
nhrp network-id 10
nhrp entry 192.168.6.1 13.1.1.1 register
R3:
interface Tunnel0/0/0
ip address 192.168.6.3 255.255.255.0
tunnel-protocol gre p2mp
source 15.1.1.1
ospf network-type broadcast ---------将接口网络类型修改为广播
ospf dr-priority 0 ---------不参与选举,否则选举混乱
nhrp network-id 10
nhrp entry 192.168.6.1 13.1.1.1 register
3.R1为中心站点所有私有网段可以互相通讯,私有网段使用OSPF完成。