双归上行--主备

1.三个设备都创建vlan2 3

vlan batch 2 3

2.接入层1-9口vlan2 10-19口vlan3

lsw3 1-9口

port-group group-member g0/0/1 to g0/0/9
port link-type access
port default vlan 2

10-19口

port-group group-member g0/0/10 to g0/0/19
port link-type access
port default vlan 3

3.配置上行接口23 24

lsw3

interface GigabitEthernet0/0/23
port link-type trunk
undo port trunk allow-pass vlan 1 //防止VLAN1出环
port trunk allow-pass vlan 2 to 3
#
interface GigabitEthernet0/0/24
port link-type trunk
undo port trunk allow-pass vlan 1
port trunk allow-pass vlan 2 to 3

对于未规划用途并且长期不使用的接口进行关闭处理

> port-group group-member g0/0/20 to g0/0/22 
> shutdown

添加接口描述

> interface GigabitEthernet0/0/23 
> description to_BG-AGG-Mster-S5728C_G0/0/23 //改接口连接了BG-AGG-Mster-S5728C设备的 G0/0/23口

设备命名

> [AGG-master]sysname BG-AGG-Mster-S5728C // 地点/归属-逻辑作用-属性-型号

4.下行接口 lsw1的23接口trunk，lsw2的24接口trunk

interface GigabitEthernet0/0/23
port link-type trunk
undo port trunk allow-pass vlan 1
port trunk allow-pass vlan 2 to 3

interface GigabitEthernet0/0/24
port link-type trunk
undo port trunk allow-pass vlan 1
port trunk allow-pass vlan 2 to 3

5.接口聚合

lsw1 lsw2

int eth-trunk 1
trunkport g0/0/1
trunkport g0/0/2

查看聚合接口

display eth-trunk

更改聚合接口链路属性

port link-type trunk
undo port trunk allow-pass vlan 1
port trunk allow-pass vlan 2 to 3

6.生成树配置（主备）

主设备 lsw1

stp enable
stp mode mstp
stp region-configuration
region-name BG
revision-level 1
instance 1 vlan 2 to 3
active region-configuration
stp instance 1 root primary //设置为主根桥

备设备 lsw2

stp enable
stp mode mstp
stp region-configuration
region-name BG
revision-level 1
instance 1 vlan 2 to 3
active region-configuration
stp instance 1 root primary //设置为备根桥

非根设备 lsw3

stp enable
stp mode mstp
stp region-configuration
region-name BG
revision-level 1
instance 1 vlan 2 to 3
active region-configuration

7.检查配置

在非根（lsw3）上检查生成树是否按要求收敛

display stp instance 1 interface g0/0/23
display stp instance 1 interface g0/0/24