目录
1.3 把connector支持的encoder和数量返回给用户
2. fill_mode --> drm_helper_probe_single_connector_modes
2.3.2 如果没有读到2.3.1描述的edid，那么加载drm框架自带的mode
2.3.3 把命令行指定的modes加入到connector->probed_modes链表中
2.4 把modes从probed_modes链表移到modes链表
2.6.1 drm_mode_validate_pipeline
2.7 调用drm_mode_prune_invalid把mode状态不是OK的移除链表
本文分析一下APP调用ioctl传入DRM_IOCTL_MODE_GETCONNECTOR的操作，其对应kernel为drm_mode_getconnector函数。
1. drm_mode_getconnector分析
1.1 找到connector
int drm_mode_getconnector(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_get_connector *out_resp = data;
struct drm_connector *connector;
struct drm_encoder *encoder;
struct drm_display_mode *mode;
int mode_count = 0;
int encoders_count = 0;
int ret = 0;
int copied = 0;
int i;
struct drm_mode_modeinfo u_mode;
struct drm_mode_modeinfo __user *mode_ptr;
uint32_t __user *encoder_ptr;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
memset(&u_mode, 0, sizeof(struct drm_mode_modeinfo));
connector = drm_connector_lookup(dev, out_resp->connector_id); // (1)
if (!connector)
return -ENOENT;1.2 计算该connector的encoder数量
for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) // (2)
if (connector->encoder_ids[i] != 0)
encoders_count++;
1.3 把connector支持的encoder和数量返回给用户
if ((out_resp->count_encoders >= encoders_count) && encoders_count) { // (3)
copied = 0;
encoder_ptr = (uint32_t __user *)(unsigned long)(out_resp->encoders_ptr);
for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
if (connector->encoder_ids[i] != 0) {
if (put_user(connector->encoder_ids[i],
encoder_ptr + copied)) {
ret = -EFAULT;
goto out;
}
copied++;
}
}
}
out_resp->count_encoders = encoders_count; 1.4 把找到的connector的参数返回给应用
out_resp->connector_id = connector->base.id; // (4)
out_resp->connector_type = connector->connector_type;
out_resp->connector_type_id = connector->connector_type_id;1.5 填充mode（很重要）
mutex_lock(&dev->mode_config.mutex);
if (out_resp->count_modes == 0) { // (5)
connector->funcs->fill_modes(connector,
dev->mode_config.max_width,
dev->mode_config.max_height);
}1.6 把找到的connector的参数返回给应用
out_resp->mm_width = connector->display_info.width_mm; // (6)
out_resp->mm_height = connector->display_info.height_mm;
out_resp->subpixel = connector->display_info.subpixel_order;
out_resp->connection = connector->status;1.7 计算mode的数量
/* delayed so we get modes regardless of pre-fill_modes state */
list_for_each_entry(mode, &connector->modes, head) // (7)
if (drm_mode_expose_to_userspace(mode, file_priv))
mode_count++;1.8 把mode的参数和mode的数量返回给应用
/*
* This ioctl is called twice, once to determine how much space is
* needed, and the 2nd time to fill it.
*/
if ((out_resp->count_modes >= mode_count) && mode_count) { // (8)
copied = 0;
mode_ptr = (struct drm_mode_modeinfo __user *)(unsigned long)out_resp->modes_ptr;
list_for_each_entry(mode, &connector->modes, head) {
if (!drm_mode_expose_to_userspace(mode, file_priv))
continue;
drm_mode_convert_to_umode(&u_mode, mode);
if (copy_to_user(mode_ptr + copied,
&u_mode, sizeof(u_mode))) {
ret = -EFAULT;
mutex_unlock(&dev->mode_config.mutex);
goto out;
}
copied++;
}
}
out_resp->count_modes = mode_count;1.9 得到该connector的best encoder
drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
encoder = drm_connector_get_encoder(connector); // (9)
if (encoder)
out_resp->encoder_id = encoder->base.id;
else
out_resp->encoder_id = 0;1.10 刷新参数
/* Only grab properties after probing, to make sure EDID and other
* properties reflect the latest status. */ // (10)
ret = drm_mode_object_get_properties(&connector->base, file_priv->atomic,
(uint32_t __user *)(unsigned long)(out_resp->props_ptr),
(uint64_t __user *)(unsigned long)(out_resp->prop_values_ptr),
&out_resp->count_props);
drm_modeset_unlock(&dev->mode_config.connection_mutex);2. fill_mode --> drm_helper_probe_single_connector_modes
static const struct drm_connector_funcs dw_hdmi_connector_funcs = {
.fill_modes = drm_helper_probe_single_connector_modes,
.detect = dw_hdmi_connector_detect,
.destroy = drm_connector_cleanup,
.force = dw_hdmi_connector_force,
.reset = drm_atomic_helper_connector_reset,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
static const struct drm_connector_helper_funcs dw_hdmi_connector_helper_funcs = {
.get_modes = dw_hdmi_connector_get_modes,
.best_encoder = drm_atomic_helper_best_encoder,
};下面我们来分析一下这个函数。
2.1 所有的mode标记为旧的
int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
uint32_t maxX, uint32_t maxY)
{
.......
/* set all old modes to the stale state */
list_for_each_entry(mode, &connector->modes, head)
mode->status = MODE_STALE;2.2 热插拔相关
old_status = connector->status;
if (connector->force) {
if (connector->force == DRM_FORCE_ON ||
connector->force == DRM_FORCE_ON_DIGITAL)
connector->status = connector_status_connected;
else
connector->status = connector_status_disconnected;
if (connector->funcs->force)
connector->funcs->force(connector);
} else {
ret = drm_helper_probe_detect(connector, &ctx, true);
if (ret == -EDEADLK) {
drm_modeset_backoff(&ctx);
goto retry;
} else if (WARN(ret < 0, "Invalid return value %i for connector detection\n", ret))
ret = connector_status_unknown;
connector->status = ret;
}
/*
* Normally either the driver's hpd code or the poll loop should
* pick up any changes and fire the hotplug event. But if
* userspace sneaks in a probe, we might miss a change. Hence
* check here, and if anything changed start the hotplug code.
*/
if (old_status != connector->status) {
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n",
connector->base.id,
connector->name,
drm_get_connector_status_name(old_status),
drm_get_connector_status_name(connector->status));
/*
* The hotplug event code might call into the fb
* helpers, and so expects that we do not hold any
* locks. Fire up the poll struct instead, it will
* disable itself again.
*/
dev->mode_config.delayed_event = true;
if (dev->mode_config.poll_enabled)
schedule_delayed_work(&dev->mode_config.output_poll_work,
0);
}
/* Re-enable polling in case the global poll config changed. */
if (drm_kms_helper_poll != dev->mode_config.poll_running)
drm_kms_helper_poll_enable(dev);
dev->mode_config.poll_running = drm_kms_helper_poll;热插拔相关，这里不详细介绍
2.3 加载modes
2.3.1 加载固件edid的mode
if (connector->override_edid) {
struct edid *edid = (struct edid *) connector->edid_blob_ptr->data;
count = drm_add_edid_modes(connector, edid);
drm_edid_to_eld(connector, edid);
} else {
struct edid *edid = drm_load_edid_firmware(connector);
if (!IS_ERR_OR_NULL(edid)) {
drm_mode_connector_update_edid_property(connector, edid);
count = drm_add_edid_modes(connector, edid);
drm_edid_to_eld(connector, edid);
kfree(edid);
}
if (count == 0)
count = (*connector_funcs->get_modes)(connector);
}connector->override_edid是测试相关的，正式开发中不会用到，这里不讨论。这里做了两件事，如下：
（1）直接加载edid固件文件，一般存储在固定的位置，会在环境变量中指定。后使用drm_add_edid_modes添加modes。
（2）如果没有指定edid固件文件，那么就从connector helper的get_modes中获取，这里一般和显示器有关，hdmi会读取外接显示器的edid，本文使用的是dw-hdmi，get_modes调用的是dw_hdmi_connector_get_modes。
static const struct drm_connector_funcs dw_hdmi_connector_funcs = {
.fill_modes = drm_helper_probe_single_connector_modes,
.detect = dw_hdmi_connector_detect,
.destroy = drm_connector_cleanup,
.force = dw_hdmi_connector_force,
.reset = drm_atomic_helper_connector_reset,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
static const struct drm_connector_helper_funcs dw_hdmi_connector_helper_funcs = {
.get_modes = dw_hdmi_connector_get_modes,
.best_encoder = drm_atomic_helper_best_encoder,
};static int dw_hdmi_connector_get_modes(struct drm_connector *connector)
{
struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi,
connector);
struct edid *edid;
int ret = 0;
if (!hdmi->ddc)
return 0;
edid = drm_get_edid(connector, hdmi->ddc);
if (edid) {
dev_dbg(hdmi->dev, "got edid: width[%d] x height[%d]\n",
edid->width_cm, edid->height_cm);
hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid);
hdmi->sink_has_audio = drm_detect_monitor_audio(edid);
drm_mode_connector_update_edid_property(connector, edid);
cec_notifier_set_phys_addr_from_edid(hdmi->cec_notifier, edid);
ret = drm_add_edid_modes(connector, edid);
/* Store the ELD */
drm_edid_to_eld(connector, edid);
kfree(edid);
} else {
dev_dbg(hdmi->dev, "failed to get edid\n");
}
return ret;
}也是读取edid的相关信息，这里不做介绍了。
2.3.2 如果没有读到2.3.1描述的edid，那么加载drm框架自带的mode
if (count == 0 && connector->status == connector_status_connected)
count = drm_add_modes_noedid(connector, 1024, 768);2.3.3 把命令行指定的modes加入到connector->probed_modes链表中
count += drm_helper_probe_add_cmdline_mode(connector);
if (count == 0)
goto prune;2.4 把modes从probed_modes链表移到modes链表
/**
* drm_mode_connector_list_update - update the mode list for the connector
* @connector: the connector to update
*
* This moves the modes from the @connector probed_modes list
* to the actual mode list. It compares the probed mode against the current
* list and only adds different/new modes.
*
* This is just a helper functions doesn't validate any modes itself and also
* doesn't prune any invalid modes. Callers need to do that themselves.
*/
void drm_mode_connector_list_update(struct drm_connector *connector)
{
struct drm_display_mode *pmode, *pt;
WARN_ON(!mutex_is_locked(&connector->dev->mode_config.mutex));
list_for_each_entry_safe(pmode, pt, &connector->probed_modes, head) {
struct drm_display_mode *mode;
bool found_it = false;
/* go through current modes checking for the new probed mode */
list_for_each_entry(mode, &connector->modes, head) {
if (!drm_mode_equal(pmode, mode))
continue;
found_it = true;
/*
* If the old matching mode is stale (ie. left over
* from a previous probe) just replace it outright.
* Otherwise just merge the type bits between all
* equal probed modes.
*
* If two probed modes are considered equal, pick the
* actual timings from the one that's marked as
* preferred (in case the match isn't 100%). If
* multiple or zero preferred modes are present, favor
* the mode added to the probed_modes list first.
*/
if (mode->status == MODE_STALE) {
drm_mode_copy(mode, pmode);
} else if ((mode->type & DRM_MODE_TYPE_PREFERRED) == 0 &&
(pmode->type & DRM_MODE_TYPE_PREFERRED) != 0) {
pmode->type |= mode->type;
drm_mode_copy(mode, pmode);
} else {
mode->type |= pmode->type;
}
list_del(&pmode->head);
drm_mode_destroy(connector->dev, pmode);
break;
}
if (!found_it) {
list_move_tail(&pmode->head, &connector->modes);
}
}
}主要是把重复的probe_modes链表和modes链表中重复的mode删除，此函数运行以后，probe_modes链表就为空了，为下次做准备。
2.5 一些flags的设置
if (connector->interlace_allowed)
mode_flags |= DRM_MODE_FLAG_INTERLACE;
if (connector->doublescan_allowed)
mode_flags |= DRM_MODE_FLAG_DBLSCAN;
if (connector->stereo_allowed)
mode_flags |= DRM_MODE_FLAG_3D_MASK;2.6 一些mode的检查的valid检查
list_for_each_entry(mode, &connector->modes, head) {
if (mode->status == MODE_OK)
mode->status = drm_mode_validate_basic(mode);
if (mode->status == MODE_OK)
mode->status = drm_mode_validate_size(mode, maxX, maxY);
if (mode->status == MODE_OK)
mode->status = drm_mode_validate_flag(mode, mode_flags);
if (mode->status == MODE_OK)
mode->status = drm_mode_validate_pipeline(mode,
connector);
if (mode->status == MODE_OK)
mode->status = drm_mode_validate_ycbcr420(mode,
connector);
}（1）drm_mode_validate_basic做一些简单的检查
（2）drm_mode_validate_size做一些越界的检查。
（3）drm_mode_validate_flag做一些flag的检查（interlace_allowed,doublescan_allowed,stereo_allowed）
（4）drm_mode_validate_pipeline调用connector、encoder、crtc的helper func mode_valid做一些检查。
（5）drm_mode_validate_ycbcr420检查是否支持YUV420。
2.6.1 drm_mode_validate_pipeline
static enum drm_mode_status
drm_mode_validate_pipeline(struct drm_display_mode *mode,
struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
uint32_t *ids = connector->encoder_ids;
enum drm_mode_status ret = MODE_OK;
unsigned int i;
/* Step 1: Validate against connector */
ret = drm_connector_mode_valid(connector, mode);
if (ret != MODE_OK)
return ret;
/* Step 2: Validate against encoders and crtcs */
for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
struct drm_encoder *encoder = drm_encoder_find(dev, ids[i]);
struct drm_crtc *crtc;
if (!encoder)
continue;
ret = drm_encoder_mode_valid(encoder, mode);
ret = drm_bridge_mode_valid(encoder->bridge, mode);
drm_for_each_crtc(crtc, dev) {
if (!drm_encoder_crtc_ok(encoder, crtc))
continue;
ret = drm_crtc_mode_valid(crtc, mode);
}
}
return ret;
}
drm_connector_mode_valid ---> connector_funcs->mode_valid(connector, mode);
drm_encoder_mode_valid ----> encoder_funcs->mode_valid(encoder, mode);
drm_bridge_mode_valid ----> bridge->funcs->mode_valid(bridge, mode);
drm_crtc_mode_valid ---> crtc_funcs->mode_valid(crtc, mode);
2.7 调用drm_mode_prune_invalid把mode状态不是OK的移除链表
void drm_mode_prune_invalid(struct drm_device *dev,
struct list_head *mode_list, bool verbose)
{
struct drm_display_mode *mode, *t;
list_for_each_entry_safe(mode, t, mode_list, head) {
if (mode->status != MODE_OK) {
list_del(&mode->head);
if (verbose) {
drm_mode_debug_printmodeline(mode);
DRM_DEBUG_KMS("Not using %s mode: %s\n",
mode->name,
drm_get_mode_status_name(mode->status));
}
drm_mode_destroy(dev, mode);
}
}
}3. 流程图调用
扫一扫
1262
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
