/*
* linux/kernel/console.c
* //--实现终端屏幕写函数con_write()
* (C) 1991 Linus Torvalds
*/
/*
* console.c
*
* This module implements the console io functions
* 'void con_init(void)'
* 'void con_write(struct tty_queue * queue)'
* Hopefully this will be a rather complete VT102 implementation.
*
* Beeping thanks to John T Kohl.
*
* Virtual Consoles, Screen Blanking, Screen Dumping, Color, Graphics
* Chars, and VT100 enhancements by Peter MacDonald.
*/
/*
* NOTE!!! We sometimes disable and enable interrupts for a short while
* (to put a word in video IO), but this will work even for keyboard
* interrupts. We know interrupts aren't enabled when getting a keyboard
* interrupt, as we use trap-gates. Hopefully all is well.
*/
/*
* Code to check for different video-cards mostly by Galen Hunt,
* <g-hunt@ee.utah.edu>
*/
#include <linux/sched.h>
#include <linux/tty.h>
#include <linux/config.h>
#include <linux/kernel.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/segment.h>
#include <string.h>
#include <errno.h>
#define DEF_TERMIOS / //--定义终端IO结构的默认数据
(struct termios) { /
ICRNL, /
OPOST | ONLCR, /
0, /
IXON | ISIG | ICANON | ECHO | ECHOCTL | ECHOKE, /
0, /
INIT_C_CC /
}
/*
* These are set up by the setup-routine at boot-time:
*/
//--这些是setup程序在引导启动系统时设置的参数
#define ORIG_X (*(unsigned char *)0x90000)
#define ORIG_Y (*(unsigned char *)0x90001)
#define ORIG_VIDEO_PAGE (*(unsigned short *)0x90004)
#define ORIG_VIDEO_MODE ((*(unsigned short *)0x90006) & 0xff)
#define ORIG_VIDEO_COLS (((*(unsigned short *)0x90006) & 0xff00) >> 8)
#define ORIG_VIDEO_LINES ((*(unsigned short *)0x9000e) & 0xff)
#define ORIG_VIDEO_EGA_AX (*(unsigned short *)0x90008)
#define ORIG_VIDEO_EGA_BX (*(unsigned short *)0x9000a)
#define ORIG_VIDEO_EGA_CX (*(unsigned short *)0x9000c)
#define VIDEO_TYPE_MDA 0x10 /* Monochrome Text Display */
#define VIDEO_TYPE_CGA 0x11 /* CGA Display */
#define VIDEO_TYPE_EGAM 0x20 /* EGA/VGA in Monochrome Mode */
#define VIDEO_TYPE_EGAC 0x21 /* EGA/VGA in Color Mode */
#define NPAR 16
int NR_CONSOLES = 0;
extern void keyboard_interrupt(void);
static unsigned char video_type; /* Type of display being used */
static unsigned long video_num_columns; /* Number of text columns */
static unsigned long video_mem_base; /* Base of video memory */
static unsigned long video_mem_term; /* End of video memory */
static unsigned long video_size_row; /* Bytes per row */
static unsigned long video_num_lines; /* Number of test lines */
static unsigned char video_page; /* Initial video page */
static unsigned short video_port_reg; /* Video register select port */
static unsigned short video_port_val; /* Video register value port */
static int can_do_colour = 0;
static struct { //--虚拟控制台结构
unsigned short vc_video_erase_char;
unsigned char vc_attr;
unsigned char vc_def_attr;
int vc_bold_attr;
unsigned long vc_ques;
unsigned long vc_state;
unsigned long vc_restate;
unsigned long vc_checkin;
unsigned long vc_origin; /* Used for EGA/VGA fast scroll */
unsigned long vc_scr_end; /* Used for EGA/VGA fast scroll */
unsigned long vc_pos;
unsigned long vc_x,vc_y;
unsigned long vc_top,vc_bottom;
unsigned long vc_npar,vc_par[NPAR];
unsigned long vc_video_mem_start; /* Start of video RAM */
unsigned long vc_video_mem_end; /* End of video RAM (sort of) */
unsigned int vc_saved_x;
unsigned int vc_saved_y;
unsigned int vc_iscolor;
char * vc_translate;
} vc_cons [MAX_CONSOLES];
#define origin (vc_cons[currcons].vc_origin)
#define scr_end (vc_cons[currcons].vc_scr_end)
#define pos (vc_cons[currcons].vc_pos)
#define top (vc_cons[currcons].vc_top)
#define bottom (vc_cons[currcons].vc_bottom)
#define x (vc_cons[currcons].vc_x)
#define y (vc_cons[currcons].vc_y)
#define state (vc_cons[currcons].vc_state)
#define restate (vc_cons[currcons].vc_restate)
#define checkin (vc_cons[currcons].vc_checkin)
#define npar (vc_cons[currcons].vc_npar)
#define par (vc_cons[currcons].vc_par)
#define ques (vc_cons[currcons].vc_ques)
#define attr (vc_cons[currcons].vc_attr)
#define saved_x (vc_cons[currcons].vc_saved_x)
#define saved_y (vc_cons[currcons].vc_saved_y)
#define translate (vc_cons[currcons].vc_translate)
#define video_mem_start (vc_cons[currcons].vc_video_mem_start)
#define video_mem_end (vc_cons[currcons].vc_video_mem_end)
#define def_attr (vc_cons[currcons].vc_def_attr)
#define video_erase_char (vc_cons[currcons].vc_video_erase_char)
#define iscolor (vc_cons[currcons].vc_iscolor)
int blankinterval = 0;
int blankcount = 0;
static void sysbeep(void);
/*
* this is what the terminal answers to a ESC-Z or csi0c
* query (= vt100 response).
*/
#define RESPONSE "/033[?1;2c"
static char * translations[] = {
/* normal 7-bit ascii */
" !/"#$%&'()*+,-./0123456789:;<=>?"
"@ABCDEFGHIJKLMNOPQRSTUVWXYZ[//]^_"
"`abcdefghijklmnopqrstuvwxyz{|}~ ",
/* vt100 graphics */
" !/"#$%&'()*+,-./0123456789:;<=>?"
"@ABCDEFGHIJKLMNOPQRSTUVWXYZ[//]^ "
"/004/261/007/007/007/007/370/361/007/007/275/267/326/323/327/304"
"/304/304/304/304/307/266/320/322/272/363/362/343//007/234/007 "
};
#define NORM_TRANS (translations[0])
#define GRAF_TRANS (translations[1])
/* NOTE! gotoxy thinks x==video_num_columns is ok */
static inline void gotoxy(int currcons, int new_x,unsigned int new_y) //--跟踪光标当前位置
{ //--当前虚拟终端号 光标列号 光标行号
if (new_x > video_num_columns || new_y >= video_num_lines)
return;
x = new_x;
y = new_y;
pos = origin + y*video_size_row + (x<<1);
}
static inline void set_origin(int currcons) //--设置滚屏起始显示内存地址
{
if (video_type != VIDEO_TYPE_EGAC && video_type != VIDEO_TYPE_EGAM)
return;
if (currcons != fg_console)
return;
cli();
outb_p(12, video_port_reg);
outb_p(0xff&((origin-video_mem_base)>>9), video_port_val);
outb_p(13, video_port_reg);
outb_p(0xff&((origin-video_mem_base)>>1), video_port_val);
sti();
}
static void scrup(int currcons) //--向上卷动一行
{
if (bottom<=top)
return;
if (video_type == VIDEO_TYPE_EGAC || video_type == VIDEO_TYPE_EGAM)
{
if (!top && bottom == video_num_lines) {
origin += video_size_row;
pos += video_size_row;
scr_end += video_size_row;
if (scr_end > video_mem_end) {
__asm__("cld/n/t"
"rep/n/t"
"movsl/n/t"
"movl _video_num_columns,%1/n/t"
"rep/n/t"
"stosw"
::"a" (video_erase_char),
"c" ((video_num_lines-1)*video_num_columns>>1),
"D" (video_mem_start),
"S" (origin)
:"cx","di","si");
scr_end -= origin-video_mem_start;
pos -= origin-video_mem_start;
origin = video_mem_start;
} else {
__asm__("cld/n/t"
"rep/n/t"
"stosw"
::"a" (video_erase_char),
"c" (video_num_columns),
"D" (scr_end-video_size_row)
:"cx","di");
}
set_origin(currcons);
} else {
__asm__("cld/n/t"
"rep/n/t"
"movsl/n/t"
"movl _video_num_columns,%%ecx/n/t"
"rep/n/t"
"stosw"
::"a" (video_erase_char),
"c" ((bottom-top-1)*video_num_columns>>1),
"D" (origin+video_size_row*top),
"S" (origin+video_size_row*(top+1))
:"cx","di","si");
}
}
else /* Not EGA/VGA */
{
__asm__("cld/n/t"
"rep/n/t"
"movsl/n/t"
"movl _video_num_columns,%%ecx/n/t"
"rep/n/t"
"stosw"
::"a" (video_erase_char),
"c" ((bottom-top-1)*video_num_columns>>1),
"D" (origin+video_size_row*top),
"S" (origin+video_size_row*(top+1))
:"cx","di","si");
}
}
static void scrdown(int currcons) //--向下卷动一行
{
if (bottom <= top)
return;
if (video_type == VIDEO_TYPE_EGAC || video_type == VIDEO_TYPE_EGAM)
{
__asm__("std/n/t"
"rep/n/t"
"movsl/n/t"
"addl $2,%%edi/n/t" /* %edi has been decremented by 4 */
"movl _video_num_columns,%%ecx/n/t"
"rep/n/t"
"stosw"
::"a" (video_erase_char),
"c" ((bottom-top-1)*video_num_columns>>1),
"D" (origin+video_size_row*bottom-4),
"S" (origin+video_size_row*(bottom-1)-4)
:"ax","cx","di","si");
}
else /* Not EGA/VGA */
{
__asm__("std/n/t"
"rep/n/t"
"movsl/n/t"
"addl $2,%%edi/n/t" /* %edi has been decremented by 4 */
"movl _video_num_columns,%%ecx/n/t"
"rep/n/t"
"stosw"
::"a" (video_erase_char),
"c" ((bottom-top-1)*video_num_columns>>1),
"D" (origin+video_size_row*bottom-4),
"S" (origin+video_size_row*(bottom-1)-4)
:"ax","cx","di","si");
}
}
static void lf(int currcons) //--光标在同列位置下移一行(换行)
{
if (y+1<bottom) {
y++;
pos += video_size_row;
return;
}
scrup(currcons);
}
static void ri(int currcons) //--光标在同列上移一行(反向索引)
{
if (y>top) {
y--;
pos -= video_size_row;
return;
}
scrdown(currcons);
}
static void cr(int currcons) //--光标回到第1列(回车)
{
pos -= x<<1;
x=0;
}
static void del(int currcons) //--擦除光标前一字符
{
if (x) {
pos -= 2;
x--;
*(unsigned short *)pos = video_erase_char;
}
}
static void csi_J(int currcons, int vpar) //--删除屏幕上与光标位置相关的部分
{
long count __asm__("cx");
long start __asm__("di");
switch (vpar) {
case 0: /* erase from cursor to end of display */
count = (scr_end-pos)>>1;
start = pos;
break;
case 1: /* erase from start to cursor */
count = (pos-origin)>>1;
start = origin;
break;
case 2: /* erase whole display */
count = video_num_columns * video_num_lines;
start = origin;
break;
default:
return;
}
__asm__("cld/n/t"
"rep/n/t"
"stosw/n/t"
::"c" (count),
"D" (start),"a" (video_erase_char)
:"cx","di");
}
static void csi_K(int currcons, int vpar) //--删除一行上与光标位置相关的部分
{
long count __asm__("cx");
long start __asm__("di");
switch (vpar) {
case 0: /* erase from cursor to end of line */
if (x>=video_num_columns)
return;
count = video_num_columns-x;
start = pos;
break;
case 1: /* erase from start of line to cursor */
start = pos - (x<<1);
count = (x<video_num_columns)?x:video_num_columns;
break;
case 2: /* erase whole line */
start = pos - (x<<1);
count = video_num_columns;
break;
default:
return;
}
__asm__("cld/n/t"
"rep/n/t"
"stosw/n/t"
::"c" (count),
"D" (start),"a" (video_erase_char)
:"cx","di");
}
void csi_m(int currcons ) //--设置字符属性
{
int i;
for (i=0;i<=npar;i++)
switch (par[i]) {
case 0: attr=def_attr;break; /* default */
case 1: attr=(iscolor?attr|0x08:attr|0x0f);break; /* bold */
/*case 4: attr=attr|0x01;break;*/ /* underline */
case 4: /* bold */
if (!iscolor)
attr |= 0x01;
else
{ /* check if forground == background */
if (vc_cons[currcons].vc_bold_attr != -1)
attr = (vc_cons[currcons].vc_bold_attr&0x0f)|(0xf0&(attr));
else
{ short newattr = (attr&0xf0)|(0xf&(~attr));
attr = ((newattr&0xf)==((attr>>4)&0xf)?
(attr&0xf0)|(((attr&0xf)+1)%0xf):
newattr);
}
}
break;
case 5: attr=attr|0x80;break; /* blinking */
case 7: attr=(attr<<4)|(attr>>4);break; /* negative */
case 22: attr=attr&0xf7;break; /* not bold */
case 24: attr=attr&0xfe;break; /* not underline */
case 25: attr=attr&0x7f;break; /* not blinking */
case 27: attr=def_attr;break; /* positive image */
case 39: attr=(attr & 0xf0)|(def_attr & 0x0f); break;
case 49: attr=(attr & 0x0f)|(def_attr & 0xf0); break;
default:
if (!can_do_colour)
break;
iscolor = 1;
if ((par[i]>=30) && (par[i]<=38))
attr = (attr & 0xf0) | (par[i]-30);
else /* Background color */
if ((par[i]>=40) && (par[i]<=48))
attr = (attr & 0x0f) | ((par[i]-40)<<4);
else
break;
}
}
static inline void set_cursor(int currcons) //--设置显示光标
{
blankcount = blankinterval;
if (currcons != fg_console)
return;
cli();
outb_p(14, video_port_reg);
outb_p(0xff&((pos-video_mem_base)>>9), video_port_val);
outb_p(15, video_port_reg);
outb_p(0xff&((pos-video_mem_base)>>1), video_port_val);
sti();
}
static inline void hide_cursor(int currcons) //--隐藏光标
{
outb_p(14, video_port_reg);
outb_p(0xff&((scr_end-video_mem_base)>>9), video_port_val);
outb_p(15, video_port_reg);
outb_p(0xff&((scr_end-video_mem_base)>>1), video_port_val);
}
static void respond(int currcons, struct tty_struct * tty)
{ //--为响应主机请求终端向主机发送设备属性DA
char * p = RESPONSE;
cli();
while (*p) {
PUTCH(*p,tty->read_q);
p++;
}
sti();
copy_to_cooked(tty);
}
static void insert_char(int currcons) //--在光标处插入一空格字符
{
int i=x;
unsigned short tmp, old = video_erase_char;
unsigned short * p = (unsigned short *) pos;
while (i++<video_num_columns) {
tmp=*p;
*p=old;
old=tmp;
p++;
}
}
static void insert_line(int currcons) //--在光标处插入一行
{
int oldtop,oldbottom;
oldtop=top;
oldbottom=bottom;
top=y;
bottom = video_num_lines;
scrdown(currcons);
top=oldtop;
bottom=oldbottom;
}
static void delete_char(int currcons) //--删除一个字符
{
int i;
unsigned short * p = (unsigned short *) pos;
if (x>=video_num_columns)
return;
i = x;
while (++i < video_num_columns) {
*p = *(p+1);
p++;
}
*p = video_erase_char;
}
static void delete_line(int currcons) //--删除光标所在行
{
int oldtop,oldbottom;
oldtop=top;
oldbottom=bottom;
top=y;
bottom = video_num_lines;
scrup(currcons);
top=oldtop;
bottom=oldbottom;
}
static void csi_at(int currcons, unsigned int nr) //--在光标处插入nr个字符
{
if (nr > video_num_columns)
nr = video_num_columns;
else if (!nr)
nr = 1;
while (nr--)
insert_char(currcons);
}
static void csi_L(int currcons, unsigned int nr) //--在光标位置插入nr行
{
if (nr > video_num_lines)
nr = video_num_lines;
else if (!nr)
nr = 1;
while (nr--)
insert_line(currcons);
}
static void csi_P(int currcons, unsigned int nr) //--删除光标处的nr个字符
{
if (nr > video_num_columns)
nr = video_num_columns;
else if (!nr)
nr = 1;
while (nr--)
delete_char(currcons);
}
static void csi_M(int currcons, unsigned int nr) //--删除光标处的nr行
{
if (nr > video_num_lines)
nr = video_num_lines;
else if (!nr)
nr=1;
while (nr--)
delete_line(currcons);
}
static void save_cur(int currcons) //--保存当前光标位置
{
saved_x=x;
saved_y=y;
}
static void restore_cur(int currcons) //--恢复保存的光标位置
{
gotoxy(currcons,saved_x, saved_y);
}
//--枚举用于下面con_write()函数中处理转义序列活控制序列的解析
enum { ESnormal, ESesc, ESsquare, ESgetpars, ESgotpars, ESfunckey,
ESsetterm, ESsetgraph };
void con_write(struct tty_struct * tty) //--控制台些函数
{ //--从终端对应的tty写缓冲队列中取字符,针对每个字符进行分析
int nr;
char c;
int currcons;
currcons = tty - tty_table;
if ((currcons>=MAX_CONSOLES) || (currcons<0))
panic("con_write: illegal tty");
nr = CHARS(tty->write_q);
while (nr--) {
if (tty->stopped)
break;
GETCH(tty->write_q,c);
if (c == 24 || c == 26)
state = ESnormal;
switch(state) {
case ESnormal:
if (c>31 && c<127) {
if (x>=video_num_columns) {
x -= video_num_columns;
pos -= video_size_row;
lf(currcons);
}
__asm__("movb %2,%%ah/n/t"
"movw %%ax,%1/n/t"
::"a" (translate[c-32]),
"m" (*(short *)pos),
"m" (attr)
:"ax");
pos += 2;
x++;
} else if (c==27)
state=ESesc;
else if (c==10 || c==11 || c==12)
lf(currcons);
else if (c==13)
cr(currcons);
else if (c==ERASE_CHAR(tty))
del(currcons);
else if (c==8) {
if (x) {
x--;
pos -= 2;
}
} else if (c==9) {
c=8-(x&7);
x += c;
pos += c<<1;
if (x>video_num_columns) {
x -= video_num_columns;
pos -= video_size_row;
lf(currcons);
}
c=9;
} else if (c==7)
sysbeep();
else if (c == 14)
translate = GRAF_TRANS;
else if (c == 15)
translate = NORM_TRANS;
break;
case ESesc:
state = ESnormal;
switch (c)
{
case '[':
state=ESsquare;
break;
case 'E':
gotoxy(currcons,0,y+1);
break;
case 'M':
ri(currcons);
break;
case 'D':
lf(currcons);
break;
case 'Z':
respond(currcons,tty);
break;
case '7':
save_cur(currcons);
break;
case '8':
restore_cur(currcons);
break;
case '(': case ')':
state = ESsetgraph;
break;
case 'P':
state = ESsetterm;
break;
case '#':
state = -1;
break;
case 'c':
tty->termios = DEF_TERMIOS;
state = restate = ESnormal;
checkin = 0;
top = 0;
bottom = video_num_lines;
break;
/* case '>': Numeric keypad */
/* case '=': Appl. keypad */
}
break;
case ESsquare:
for(npar=0;npar<NPAR;npar++)
par[npar]=0;
npar=0;
state=ESgetpars;
if (c =='[') /* Function key */
{ state=ESfunckey;
break;
}
if (ques=(c=='?'))
break;
case ESgetpars:
if (c==';' && npar<NPAR-1) {
npar++;
break;
} else if (c>='0' && c<='9') {
par[npar]=10*par[npar]+c-'0';
break;
} else state=ESgotpars;
case ESgotpars:
state = ESnormal;
if (ques)
{ ques =0;
break;
}
switch(c) {
case 'G': case '`':
if (par[0]) par[0]--;
gotoxy(currcons,par[0],y);
break;
case 'A':
if (!par[0]) par[0]++;
gotoxy(currcons,x,y-par[0]);
break;
case 'B': case 'e':
if (!par[0]) par[0]++;
gotoxy(currcons,x,y+par[0]);
break;
case 'C': case 'a':
if (!par[0]) par[0]++;
gotoxy(currcons,x+par[0],y);
break;
case 'D':
if (!par[0]) par[0]++;
gotoxy(currcons,x-par[0],y);
break;
case 'E':
if (!par[0]) par[0]++;
gotoxy(currcons,0,y+par[0]);
break;
case 'F':
if (!par[0]) par[0]++;
gotoxy(currcons,0,y-par[0]);
break;
case 'd':
if (par[0]) par[0]--;
gotoxy(currcons,x,par[0]);
break;
case 'H': case 'f':
if (par[0]) par[0]--;
if (par[1]) par[1]--;
gotoxy(currcons,par[1],par[0]);
break;
case 'J':
csi_J(currcons,par[0]);
break;
case 'K':
csi_K(currcons,par[0]);
break;
case 'L':
csi_L(currcons,par[0]);
break;
case 'M':
csi_M(currcons,par[0]);
break;
case 'P':
csi_P(currcons,par[0]);
break;
case '@':
csi_at(currcons,par[0]);
break;
case 'm':
csi_m(currcons);
break;
case 'r':
if (par[0]) par[0]--;
if (!par[1]) par[1] = video_num_lines;
if (par[0] < par[1] &&
par[1] <= video_num_lines) {
top=par[0];
bottom=par[1];
}
break;
case 's':
save_cur(currcons);
break;
case 'u':
restore_cur(currcons);
break;
case 'l': /* blank interval */
case 'b': /* bold attribute */
if (!((npar >= 2) &&
((par[1]-13) == par[0]) &&
((par[2]-17) == par[0])))
break;
if ((c=='l')&&(par[0]>=0)&&(par[0]<=60))
{
blankinterval = HZ*60*par[0];
blankcount = blankinterval;
}
if (c=='b')
vc_cons[currcons].vc_bold_attr
= par[0];
}
break;
case ESfunckey:
state = ESnormal;
break;
case ESsetterm: /* Setterm functions. */
state = ESnormal;
if (c == 'S') {
def_attr = attr;
video_erase_char = (video_erase_char&0x0ff) | (def_attr<<8);
} else if (c == 'L')
; /*linewrap on*/
else if (c == 'l')
; /*linewrap off*/
break;
case ESsetgraph:
state = ESnormal;
if (c == '0')
translate = GRAF_TRANS;
else if (c == 'B')
translate = NORM_TRANS;
break;
default:
state = ESnormal;
}
}
set_cursor(currcons);
}
/*
* void con_init(void);
*
* This routine initalizes console interrupts, and does nothing
* else. If you want the screen to clear, call tty_write with
* the appropriate escape-sequece.
*
* Reads the information preserved by setup.s to determine the current display
* type and sets everything accordingly.
*/
void con_init(void) //--读取setup.S程序保存的信息,用以确定当前显示器的类型,并设置相关参数
{
register unsigned char a;
char *display_desc = "????";
char *display_ptr;
int currcons = 0;
long base, term;
long video_memory;
video_num_columns = ORIG_VIDEO_COLS;
video_size_row = video_num_columns * 2;
video_num_lines = ORIG_VIDEO_LINES;
video_page = ORIG_VIDEO_PAGE;
video_erase_char = 0x0720;
blankcount = blankinterval;
if (ORIG_VIDEO_MODE == 7) /* Is this a monochrome display? */
{
video_mem_base = 0xb0000;
video_port_reg = 0x3b4;
video_port_val = 0x3b5;
if ((ORIG_VIDEO_EGA_BX & 0xff) != 0x10)
{
video_type = VIDEO_TYPE_EGAM;
video_mem_term = 0xb8000;
display_desc = "EGAm";
}
else
{
video_type = VIDEO_TYPE_MDA;
video_mem_term = 0xb2000;
display_desc = "*MDA";
}
}
else /* If not, it is color. */
{
can_do_colour = 1;
video_mem_base = 0xb8000;
video_port_reg = 0x3d4;
video_port_val = 0x3d5;
if ((ORIG_VIDEO_EGA_BX & 0xff) != 0x10)
{
video_type = VIDEO_TYPE_EGAC;
video_mem_term = 0xc0000;
display_desc = "EGAc";
}
else
{
video_type = VIDEO_TYPE_CGA;
video_mem_term = 0xba000;
display_desc = "*CGA";
}
}
video_memory = video_mem_term - video_mem_base;
NR_CONSOLES = video_memory / (video_num_lines * video_size_row);
if (NR_CONSOLES > MAX_CONSOLES)
NR_CONSOLES = MAX_CONSOLES;
if (!NR_CONSOLES)
NR_CONSOLES = 1;
video_memory /= NR_CONSOLES;
/* Let the user known what kind of display driver we are using */
display_ptr = ((char *)video_mem_base) + video_size_row - 8;
while (*display_desc)
{
*display_ptr++ = *display_desc++;
display_ptr++;
}
/* Initialize the variables used for scrolling (mostly EGA/VGA) */
base = origin = video_mem_start = video_mem_base;
term = video_mem_end = base + video_memory;
scr_end = video_mem_start + video_num_lines * video_size_row;
top = 0;
bottom = video_num_lines;
attr = 0x07;
def_attr = 0x07;
restate = state = ESnormal;
checkin = 0;
ques = 0;
iscolor = 0;
translate = NORM_TRANS;
vc_cons[0].vc_bold_attr = -1;
gotoxy(currcons,ORIG_X,ORIG_Y);
for (currcons = 1; currcons<NR_CONSOLES; currcons++) {
vc_cons[currcons] = vc_cons[0];
origin = video_mem_start = (base += video_memory);
scr_end = origin + video_num_lines * video_size_row;
video_mem_end = (term += video_memory);
gotoxy(currcons,0,0);
}
update_screen();
set_trap_gate(0x21,&keyboard_interrupt);
outb_p(inb_p(0x21)&0xfd,0x21);
a=inb_p(0x61);
outb_p(a|0x80,0x61);
outb_p(a,0x61);
}
void update_screen(void) //--更新当前控制台
{
set_origin(fg_console);
set_cursor(fg_console);
}
/* from bsd-net-2: */
void sysbeepstop(void) //--停止蜂鸣
{
/* disable counter 2 */
outb(inb_p(0x61)&0xFC, 0x61);
}
int beepcount = 0;
static void sysbeep(void) //--开通蜂鸣
{
/* enable counter 2 */
outb_p(inb_p(0x61)|3, 0x61);
/* set command for counter 2, 2 byte write */
outb_p(0xB6, 0x43);
/* send 0x637 for 750 HZ */
outb_p(0x37, 0x42);
outb(0x06, 0x42);
/* 1/8 second */
beepcount = HZ/8;
}
int do_screendump(int arg) //--拷贝屏幕,把屏幕内容复制到指定的用户缓冲区arg中
{
char *sptr, *buf = (char *)arg;
int currcons, l;
verify_area(buf,video_num_columns*video_num_lines);
currcons = get_fs_byte(buf);
if ((currcons<1) || (currcons>NR_CONSOLES))
return -EIO;
currcons--;
sptr = (char *) origin;
for (l=video_num_lines*video_num_columns; l>0 ; l--)
put_fs_byte(*sptr++,buf++);
return(0);
}
void blank_screen() //--黑屏处理,在某段时间内没有任何操作就让屏幕黑屏
{
if (video_type != VIDEO_TYPE_EGAC && video_type != VIDEO_TYPE_EGAM)
return;
/* blank here. I can't find out how to do it, though */
}
void unblank_screen() //--恢复屏幕
{
if (video_type != VIDEO_TYPE_EGAC && video_type != VIDEO_TYPE_EGAM)
return;
/* unblank here */
}
void console_print(const char * b) //--控制台显示函数,仅用于内核显示函数
{
int currcons = fg_console;
char c;
while (c = *(b++)) {
if (c == 10) {
cr(currcons);
lf(currcons);
continue;
}
if (c == 13) {
cr(currcons);
continue;
}
if (x>=video_num_columns) {
x -= video_num_columns;
pos -= video_size_row;
lf(currcons);
}
__asm__("movb %2,%%ah/n/t"
"movw %%ax,%1/n/t"
::"a" (c),
"m" (*(short *)pos),
"m" (attr)
:"ax");
pos += 2;
x++;
}
set_cursor(currcons);
}
linux-console.c
最新推荐文章于 2021-05-01 17:08:19 发布