Arduino Flora可穿戴电子平台使用指南

决视

Windows驱动安装

// Pin D7 has an LED connected on FLORA.
// give it a name:
int led = 7;
// the setup routine runs once when you press reset:
void setup() {
// initialize the digital pin as an output.
pinMode(led, OUTPUT);
} /
/ the loop routine runs over and over again forever:
void loop() {

digitalWrite(led, HIGH); 	// turn the LED on (HIGH is the voltage level)
delay(1000); 	// wait for a second
digitalWrite(led, LOW); 	// turn the LED off by making the voltage LOW
delay(1000); 	// wait for a second
} 

点击“上传”按钮，将开始编绎程序，等待程充即将编绎完成的时候，按下板上的"Reset"按钮开始烧写程序到Flora开发板，程序下载成功后，板的的LED开始按1秒的频率闪烁，你的第一个应用就这样成功的完成啦！添加链接描述