华为防火墙双机热备主备备份和负载分担配置案例（两端为路由跑ospf）

FW1
hrp enable
hrp interface GigabitEthernet1/0/2 remote 172.16.0.2
hrp ospf-cost adjust-enable
这条命令会自动把主设备standby的ospf的值调整为65000，再加上原来的默认cost开销值，如果是active则cost值不调整，为默认开销值。

hrp mirror sessio enable //在负载分担模式下一般要开启快速会话备份功能

interface GigabitEthernet1/0/0
undo shutdown
ip address 1.1.1.2 255.255.255.0
hrp track active
如果是负载分担就多打一条命令:hrp track standby

interface GigabitEthernet1/0/1
undo shutdown
ip address 10.1.1.2 255.255.255.0
hrp track active
如果是负载分担就多打一条命令:hrp track standby

interface GigabitEthernet1/0/2
undo shutdown
ip address 172.16.0.1 255.255.255.0

firewall zone trust
set priority 85
add interface GigabitEthernet0/0/0
add interface GigabitEthernet1/0/1

firewall zone untrust
set priority 5
add interface GigabitEthernet1/0/0

firewall zone dmz
set priority 50
add interface GigabitEthernet1/0/2

security-policy //暂时全允许
default action permit

FW2:
hrp enable
hrp interface GigabitEthernet1/0/2 remote 172.16.0.1
hrp ospf-cost adjust-enable

hrp mirror sessio enable //在负载分担模式下一般要开启快速会话备份功能

interface GigabitEthernet1/0/0
undo shutdown
ip address 2.2.2.2 255.255.255.0
hrp track standby
如果是负载分担就多打一条命令:hrp track active

interface GigabitEthernet1/0/1
undo shutdown
ip address 10.1.2.2 255.255.255.0
hrp track standby
如果是负载分担就多打一条命令:hrp track active

interface GigabitEthernet1/0/2
undo shutdown
ip address 172.16.0.2 255.255.255.0

firewall zone trust
set priority 85
add interface GigabitEthernet0/0/0
add interface GigabitEthernet1/0/1

firewall zone untrust
set priority 5
add interface GigabitEthernet1/0/0

firewall zone dmz
set priority 50
add interface GigabitEthernet1/0/2

security-policy
default action permit

查看
dis hrp state ver