软考华为命令

1 配置接口

interface GigabitEthernet 0/0/1

port link-type access

port default vlan 10

interface GigabitEthernet 0/0/2

port link-type trunk

port trunk pvid vlan 10

port trunk allow-pass vlan xxxxxx

2 vlan 配置

system-view

vlan batch 10 to 20 //批量

vlan 21 //单vlan

//配置vlan名称

vlan 22

name xx

quit

vlan vlan-name xx //通过名称进入相应vlan

//端口指定到vlan

vlan 10

quit

interface GigabitEthernet 0/0/1

port link-type access

port default vlan 10

//批量设置vlan

port-group 10

group-member GigabitEthernet 0/0/2 to GigabitEthernet 0/0/10

port link-type access

NAT

//easyip方式

acl number 2000 //创建acl2000

rule 5 permit source 192.168.0.0 0.0.0.255 //允许转换的内网地址段

quit

interface Ethernet0/0/1

undo port switch //关闭交换特性切换为路由接口

ip address 192.168.0.1 255.255.255.0

quit

int G0/0/1

ip address 200.100.1.2 255.255.255.0

nat outbond 2000 //在出接口上做easy ip 方式nat

quit

ip route-static 0.0.0.0 0.0.0.0 200.100.1.1