RIPv2路由实验1（入门）

ip地址一览表

设备	端口	ip地址
AR1000v1	G0/0/0	10.0.12.1/24
AR1000v2	G0/0/0	10.0.12.2/24
AR1000v1	G0/0/1	10.0.1.254/24
AR1000v2	G0/0/1	10.0.2.254/24

1、两个路由器这会相互不能ping通

2、给两个路由器配置RIPv2

AR1000v1

[Huawei]rip
[Huawei-rip-1]version 2
[Huawei-rip-1]network 10.0.0.0


AR1000v2

[Huawei]rip
[Huawei-rip-1]version 2
[Huawei-rip-1]network 10.0.0.0

3、AR1000v1 ping 10.0.2.254，发现这会可以ping通，说明RIPv2配置成功。

[Huawei]ping 10.0.2.254
  PING 10.0.2.254: 56  data bytes, press CTRL_C to break
    Reply from 10.0.2.254: bytes=56 Sequence=1 ttl=255 time=1 ms
    Reply from 10.0.2.254: bytes=56 Sequence=2 ttl=255 time=1 ms
    Reply from 10.0.2.254: bytes=56 Sequence=3 ttl=255 time=1 ms
    Reply from 10.0.2.254: bytes=56 Sequence=4 ttl=255 time=1 ms
    Reply from 10.0.2.254: bytes=56 Sequence=5 ttl=255 time=1 ms

  --- 10.0.2.254 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 1/1/1 ms

4、查看路由器AR1000v1的路由表，发现路由表里出现了10.0.2.0的网段，证明路由器AR1000v1通过RIPv2路由协议学习到了AR1000v2路由器中的路由表

[Huawei]display ip routing-table 
Route Flags: R - relay, D - download to fib, T - to vpn-instance
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 11       Routes : 11       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

       10.0.1.0/24  Direct  0    0           D   10.0.1.254      GigabitEthernet0/0/1
     10.0.1.254/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/1
     10.0.1.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/1
       10.0.2.0/24  RIP     100  1           D   10.0.12.2       GigabitEthernet0/0/0
      10.0.12.0/24  Direct  0    0           D   10.0.12.1       GigabitEthernet0/0/0
      10.0.12.1/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/0
    10.0.12.255/32  Direct  0    0           D   127.0.0.1       GigabitEthernet0/0/0
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0

5、查看路由器AR1000v1的RIP相关信息

[Huawei]display rip
Public VPN-instance    
    RIP process : 1
       RIP version   : 2
       Preference    : 100
       Checkzero     : Enabled
       Default-cost  : 0
       Summary       : Enabled
       Host-route    : Enabled
       Maximum number of balanced paths : 8
       Update time   : 30 sec              Age time : 180 sec 
       Garbage-collect time : 120 sec 
       Graceful restart  : Disabled
       BFD               : Disabled
       Silent-interfaces : None 
       Default-route     : Disabled
       Verify-source     : Enabled
       Networks : 
       10.0.0.0                          
       Configured peers             : None 
       NQA test instances           : None
       Number of routes in database : 4
       Number of interfaces enabled : 2
       Triggered updates sent       : 1
       Number of route changes      : 1