HP 3PAR 8200更换控制器

**

HP 3PAR 8200更换控制器

**

1、更换HP 3PAR 8200控制器需要更改Serial Number等信息；

2、用串口线或者管理IP登录正常节点的CLI，查看当前系统cluster的System ID和Serial Number。在更换控制器后需要将这两项改成与当前系统一样，否则不能正常加入系统cluster。

3par8200 cli% showsys -d
--------------General--------------
System Name        :    3par8200
System Model       :   HP_3PAR 8200
Serial Number      :     7BA525P4EN
System ID          :        0x2137B
Number of Nodes    :              1
Master Node        :              0
Nodes Online       :              0
Nodes in Cluster   :              0
Cluster LED        :            n/a
Chunklet Size (MB) :           1024
Minimum PW length  :              6

3、拔下坏的控制器，将坏控制器里面的系统盘安装到新控制器上，将新控制器更换上去。在新控制器上插上串口线，控制器自动对SPI进行微码更新：

Loading image from '/opt/tpd/bios/replace-scriptonly'
Currently in flash memory:
HP SPI Image 05.02.54.  Release version. 07:37:49 Mar 01 2017.

Latest version available:
HP SPI Image 04.08.39.  Release version. 15:36:45 Sep 13 2017.

Flash update starts in: 1
Disabled FSBC boot watchdog.

UEFI-OpenSSL BIOS signature validation :
- Signature Index : 0, Public Key Index : 0 
- Generate RSA Context .............. [Pass]
- Set RSA Key Components ............ [Pass]
- Hash Original Message ............. [Pass]
- PKCS#1 Signature Verification ..... [Failed]
- Signature Index : 0, Public Key Index : 1 
- Generate RSA Context .............. [Pass]
- Set RSA Key Components ............ [Pass]
- Hash Original Message ............. [Pass]
- PKCS#1 Signature Verification ..... [Pass]
- Release RSA Context ............... [Pass]


Flash Update Task Listing:
#: Dst        Src        Length     Flags

---

0: 0x00000000 0x00000000 0x01000000 (0xcc) HECI BIOS PowerCycle 
Erasing SPI at: 0x00000000; Length: 0x01000000
Erasing blocks: [................................]   
Verifying Erase at: 0x00000000; Length: 0x01000000
Verifying erase:  [................................]   
Writing SPI at: 0x00000000; Length: 0x01000000
Writing bytes:  [................................]   
Verifying SPI at: 0x00000000; Length: 0x01000000
Verifying bytes:  [................................]   
Loading PEIM at 0x000FFFD8F20 CpuPeim.efi
Loading PEIM at 0x000FFFCC0A0 PcatSingleSegmentPciCfg2Pei.efi
Loading PEIM at 0x000FFFCD9A0 PciCfgOnPciCfg2Thunk.efi
Loading PEIM at 0x000FFFD6F20 PlatformInfo.efi
Board ID = BoardIdTornadoNode 
Waited 3500 ms for NEMOE boot
Board Revision : 06
BIOS Version: HP SPI Image 04.08.39.  Release version. 15:36:45 Sep 13 	2017.

4、SPI微码更新完之后，在进行CPU自检的时候按Ctrl+w，进入hack模式。

Bootstrap CPU0
  Intel(R) Xeon(R) CPU E5-1428L v2 @ 2.20GHz
  Family 6, Model 62, Stepping 4, Features bfebfbff:3
  SKU Info: Max Frequency Ratio 22, Max Core Count 6
  CPU speed: 2200.00 MHz
  Bus speed:  100.00 MHz
  Bus to CPU ratio: 1/22

5、使用prom edit将W19项改为0x2137B，W19对应System ID（0x对应000）。注意Node ID，如果与槽位node位置不相符，也需要更改ID号。比如node 0槽位上的控制器对应的Node ID是00、node 1槽位上的控制器对应的Node ID是01。

Whack>prom edit
Board Spin:       06
Size * 256 bytes: 04
Board Class:      920
Board Base:       200048
Board Rev:        A1
Assembly Vendor:  FXN
Assembly Year:    2016
Assembly Week:    17
Assembly Day:     29
Assembly Serial:  00075631
System Serial:    0
Node ID:          01
Midplane Type:    1a
Node Type:        20
W19:              0002137B

6、使用prom hp edit将Saleable Serial Num改为7BA525P4EN 。

Whack>prom hp edit
HW Revision:         004*
Product ID:          HP_3PAR  8200           
Assembly Serial Num: xxxxxxxLM2xxxx  
Assembly Part Num:   xxxxx-xxxxx     
Saleable Serial Num: 7BA525P4EN  
Saleable Part Num:   K2xxx          
Spare Part Num:      809805-xxx 

7、改完之后reset，系统会自动同步相关信息，并加入到cluster。等控制器起来后用相关命令查看是否正常。

温馨提示：以上内容仅供参考，未避免出现问题，建议专业人员进行操作。