C语言 AES算法 加密解密

本文介绍了一种使用C语言实现的AES128位加密和解密方法,包括秘钥扩展、加解密过程等关键步骤,并提供了完整的代码示例。

C语言 实现 AES 128 位加密解密
1、调用函数

#include "stdio.h"  
#include "stdlib.h"
#include <string.h>

#include "aes.h"

extern OL_APITABLE_T *AP_interface;

typedef struct{
    uint32_t eK[44], dK[44];    // encKey, decKey
    int Nr; // 10 rounds
}AesKey;

#define BLOCKSIZE 16  //AES-128分组长度为16字节

// uint8_t y[4] -> uint32_t x
#define LOAD32H(x, y) \
  do { (x) = ((uint32_t)((y)[0] & 0xff)<<24) | ((uint32_t)((y)[1] & 0xff)<<16) | \
             ((uint32_t)((y)[2] & 0xff)<<8)  | ((uint32_t)((y)[3] & 0xff));} while(0)

// uint32_t x -> uint8_t y[4]
#define STORE32H(x, y) \
  do { (y)[0] = (uint8_t)(((x)>>24) & 0xff); (y)[1] = (uint8_t)(((x)>>16) & 0xff);   \
       (y)[2] = (uint8_t)(((x)>>8) & 0xff); (y)[3] = (uint8_t)((x) & 0xff); } while(0)

// 从uint32_t x中提取从低位开始的第n个字节
#define BYTE(x, n) (((x) >> (8 * (n))) & 0xff)

/* used for keyExpansion */
// 字节替换然后循环左移1位
#define MIX(x) (((S[BYTE(x, 2)] << 24) & 0xff000000) ^ ((S[BYTE(x, 1)] << 16) & 0xff0000) ^ \
                ((S[BYTE(x, 0)] << 8) & 0xff00) ^ (S[BYTE(x, 3)] & 0xff))

// uint32_t x循环左移n位
#define ROF32(x, n)  (((x) << (n)) | ((x) >> (32-(n))))
// uint32_t x循环右移n位
#define ROR32(x, n)  (((x) >> (n)) | ((x) << (32-(n))))

/* for 128-bit blocks, Rijndael never uses more than 10 rcon values */
// AES-128轮常量
static const uint32_t rcon[10] = {
        0x01000000UL, 0x02000000UL, 0x04000000UL, 0x08000000UL, 0x10000000UL,
        0x20000000UL, 0x40000000UL, 0x80000000UL, 0x1B000000UL, 0x36000000UL
};
// S盒
unsigned char S[256] = {
        0x63, 0x7C, 0x77, 0x7B, 0xF2, 0x6B, 0x6F, 0xC5, 0x30, 0x01, 0x67, 0x2B, 0xFE, 0xD7, 0xAB, 0x76,
        0xCA, 0x82, 0xC9, 0x7D, 0xFA, 0x59, 0x47, 0xF0, 0xAD, 0xD4, 0xA2, 0xAF, 0x9C, 0xA4, 0x72, 0xC0,
        0xB7, 0xFD, 0x93, 0x26, 0x36, 0x3F, 0xF7, 0xCC, 0x34, 0xA5, 0xE5, 0xF1, 0x71, 0xD8, 0x31, 0x15,
        0x04, 0xC7, 0x23, 0xC3, 0x18, 0x96, 0x05, 0x9A, 0x07, 0x12, 0x80, 0xE2, 0xEB, 0x27, 0xB2, 0x75,
        0x09, 0x83, 0x2C, 0x1A, 0x1B, 0x6E, 0x5A, 0xA0, 0x52, 0x3B, 0xD6, 0xB3, 0x29, 0xE3, 0x2F, 0x84,
        0x53, 0xD1, 0x00, 0xED, 0x20, 0xFC, 0xB1, 0x5B, 0x6A, 0xCB, 0xBE, 0x39, 0x4A, 0x4C, 0x58, 0xCF,
        0xD0, 0xEF, 0xAA, 0xFB, 0x43, 0x4D, 0x33, 0x85, 0x45, 0xF9, 0x02, 0x7F, 0x50, 0x3C, 0x9F, 0xA8,
        0x51, 0xA3, 0x40, 0x8F, 0x92, 0x9D, 0x38, 0xF5, 0xBC, 0xB6, 0xDA, 0x21, 0x10, 0xFF, 0xF3, 0xD2,
        0xCD, 0x0C, 0x13, 0xEC, 0x5F, 0x97, 0x44, 0x17, 0xC4, 0xA7, 0x7E, 0x3D, 0x64, 0x5D, 0x19, 0x73,
        0x60, 0x81, 0x4F, 0xDC, 0x22, 
用C语言实现的128位AES加密算法,可以运行在JAVA的JNI 中AIS加密算法c语言实现代码 nt cnt for(ent =0: cnt< 8: cnt++) BvtcToBit(*(ch+cnt), bit+(ent<<3)) return /将二进制位串转为长度为8的字符串水 int Bit64ToChar8 (ElemType bitL64, ElemType ch18) int cnt memset(ch, 0, 8) for(ent-0: cnt<8: cnt++i BitToByte(bit+(cnt<<3), ch+cnt) return 0 /*生成子密钥 int DES Make Subkeys(ElemType key _64, ElemType subkeys [16][48]) ElemType temp 56 int cnt DES PCI Transform(key,temp):/*PCI置换* for(cnt=0;cnt<16;cnt+-){*16轮跌代,产生16个子密钥米 DES ROL(tenp, MOVE TIMES[cnt]);循坏左移* DES PC2 Transform(temp, subkeys cnt]);/PC2置换,产生子密钥体 return o /*密钥置換1*/ int DES PCI Transform(ElemType key [64, ElemType tempts[56])t int cnt for(cnt=0: cnt( 56 cnt++) )empts[cnt]= key[ Ilant] r巳turn /*密钥置換2* int DES PC2 Transform(Elem Type key [56], ElemType tempts[48])i t cnt for(ent =0: cnt< 48: cnt+)I )pbts [cnt]= key [PC 2[cnt]] return /*循环左移*/ int DES ROL (Elem Type data[56], int time)t Elem l'ype temp _56 /*保存将要循环栘动到右边的位* memcpy(temp, data, time) memcpy(temg-time, data+28, time) /*前28位移动 (data-28-time, temp, time) /*后28位移动* memcpy(data 28, data+28+time, 28-time memcpy (data-56-time, temp+time, time) return o /*P置换*/ int DES IP) Iransform(Elemlype data[64)[ ElemType temp _64]: for(cnt templet- datalIP Tablelcnt」」 memcpy(data, temp, 64) return o 第3页 AIS加密算法c语言实现代码 /*IP逆置換* int DES IP 1 Transform(ElemType data[64)( int cnt ElemType temp _64 for(cnt =0: cnt 64: cnt+-)i templet」- dataLIP1 Tablelcrt]」 memcpy(data, temp, 64) return o /*扩展置换*/ int DES E Transform(ElemType data[48])( Int cn ElemType temp48」 for(ent-0: cnt 48: cnt-) temp lent= datale Tablelent memcpy( data, temp, 48 return o P置换 int DES P Transform(ElemType data[32])( t ElemType temp_32] for(ent =0; cnt 32; cnt+-) temp ent-datalP Tablel 11 me.mcpy(data, temp, 32) return 0 /水异或* int DES XOR(Elem Type R[48, Elem Type L[48], int count)I int cnt for(cnt-0: cnt< count: cnt++)i RIant]= lent] return 0 /*S盒置换*/ int DES SBOX (Elem Type data[48]) int cnt int line, row, output int curl, cur for(ent=0; cnt( 8: cnt++i curl cnt:6 cur2= cnt<<2 /*计算在S盒中的行列来 line=(data cur1<<1)+ data[ cur1+5 row=(data[cur1+1]<<3)+(data[cur1+2]<<2) +(data「cur1-31<<1)+data「cur1+41 output s[cnt][line]trow] /*化为2进制*/ data[cur2]=(output&0X08)>>3 data[cur2+1]=(output&0X04)>>2 data (output&0X02)>1 datalcur 2+3= output&0x01 return o 交换 int DES Swap(ElemType left[32], ElemType right [32]) memcpy(temp, left, 32 memcpy(left, right, 32 memcpy (right, temp, 32 return o 第4页 AIS加密算法c语言实现代码 /*加密单个分组 int DES EncryptBlockElem Type plainBlock[8, ElemType subKeys[l6][48, ElemType cipherBlock[8])I ElemT'ype plainTs [54] ElemType copyRight[48] int cnt Char8ToBit64(plainBlock, plairBits) /米初始置换(IP置换)* DES IP Transform(plainBits /*16轮迭代* for(cnt=0: cnt< 16: cnt+-) memcpy(copyRight, plainBits- 32, 32 /*将右半部分进行扩展置换,从32位扩展到48位*/ DES E Trans form(copyRight) /*将右半部分子密钥进行异或操作 DES XOR (copy Righ 48) /*异或结果进入S盒,输出32位结果*/ DES SBOX (copyRight) /P置换 DES P Transform(copyRight) /*将明文左半部分右半部分进行异或* DES XOR (plainBits, copyRight, 32) 最终完成左右部的交换* DES Swap(plainBits, plainBits-32) /逆初始置换(IPI置换)* DES IP 1 Transform (plainBits) Bit64ToChar8(plainBits, cipherBlock) turn o /*解密单个分组 int DES DecryptBlock(ElemType cipherBlock[8, ElemType subKeys[16] 18], ElemType plainBlock [81) ElemType cipherBits[ 641 Elem Type copy Right [48] int cnt Char8ToBit64(cipherBlock, cipherBits) /初始置换(IP置换)* DES IP Transform(cipherBits /*16轮迭代*/ for(cnt-15: cnt >-0: cnt--)i memcpy(copyRight, cipherBits+32, 32 /*将右半部分进行扩展置换,从32位扩展到48位 DES T Trans form(copyright) /*将右半部分子密钥进行异或操作 DES XOR(copy Right, subKeys [ent], 48) /*异或结果进入S盒,输出32位结果* DES SBOX(copyRight) /米P置换* DES P Transform(copyright) /*将明文h半部分右半部分进行异或* DES XOR (cipherBits, copy Right, 32) f(cnt /米最终完成左右部的交换* DES Swap(cipherBits, cipherBits+32) /*逆初始置换(IP1置换)* DES IP 1 Transform(cipherBits) Bit64ToChar8(cipherBits, plainBlock) return 0: *加密文件 int DES Encrypt (char xplainFile, char *keyStr, char *cipherFile)t FILE xplain, i*cipher; int count ElcmType plainBlock[81, ciphcrBlock [8, keyBlock 8 第5页 AIS加密算法c语言实现代码 Elem Type bEy 64] ElemType subKeys[16][18] if((plain- fopen(plainFilc, " rb"))--NULL) return Plain FILe OPEN ERROR return CIPHER FILE OPEN ERROR: ))== NULL)( if ((cipher fopen(cipherFile, wb /设置密钥 memcpy (keyBlock, key Str, 8) 将密钥转换为二进制流* Char8ToBit64(keyBlock, bKcy /牛成子密钥* DES Make SubKeys(bEy, subKeys while(!feof plain))( /*每次读8个字节,并返回成功读取的字节数* if((count- fread(plainBlock, sizeof(char),8, plain)) 8){ DES EncryptBlock (plainBlock, subKeys, cipherBlock f(count)[ /*填充*/ memset(plainBlock ount, \0, 7- count) /*最后一个字符休存包括最后一个字符在内的所填充的字符数量水 plainblockl7-8-count DES EncryptBlock (plainBlock, subkeys, cipherBlock fwrite(cipherBlock, sizeof (char), 8, cipher) fclose (plain) f'c. lose(cipher return oK /*解密文件* int DES Decrypt(char *cipherFile, char *key Str, char xplainFile)i FILE* plain,米 cipher int count, times 0 long fileLen Eleml'ype plainBlock [8], cipherBlock[8], keyBlock[8 ElemType bEy _6 ElemType subKeys[16][48] if ((cipher fopen(cipherFile, rb ))= NULL)[ return CIPHEr FILe OPEN ERROR if((plain= fopen(plainFile, wb" ))= NULL) rcturn plain FIle OPEN ERROR /*设置密钥* memcpy(key Block, keyStr, 8) /将密钥转换为二进制流* Char8ToBit64 (keyBlock, bKey) /水生成子密钥* ES Make SubKeys(bKey subKeys) /取文什长度*/ fseek( cipher,0, SEEK END);/将文件指针置尾 fi lelen= ftel l( cipher);/*取文件指针当前位置*/ rewind( CIpher);/*将文件指针重指向文件头* while(1)i 密文的字节数一定是8的整数倍* fread(cipherBlock, sizeof(char), 8, cipher DES DecryptBlock(cipherBlock, subKeys, plainBlock) times +-8 if(times< fileLen fwrite(plainBlock, sizeof(char), 8, plain) /*判断末尾是否被填充米 if(plainBlock 71< 8)i 第6页 AIS加密算法c语言实现代码 for(count=8- plainBlock[7]; count< 7; count++)( if(plainBlock[ count!='\0i break if( count==7){/*有填充* fwrite(plairBlock, sizeof (char), 8- plainBlockL7, plain) else{/*无填充 fwrite(plainBlock, sizeof(char), 8, plain) t'close ( plain) fclose(cipher) return OK int main() clock t a, b a= clockO DES Encrypt( 1. txt, key. txt, 2. txt b=clock o printf("加密消耗%毫秒Ⅶn",b-a); system("pause") a= clock( DES Decrypt( 2. txt, key. txt", 3. txt") printf("解密消耗%毫秒、n",o-a) getcharo return 第7页
评论 1
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值